feat(event): 新增压降落点区域判定功能

- 在EventAnalysisService中添加determineDropZone方法用于判定压降落点区域
- 实现压降落点区域判定逻辑，支持A/B/C/D四个区域的分类判断
- 添加精确的数值范围匹配算法，使用BigDecimal确保计算精度
- 集成日志记录功能，便于问题排查和监控
- 在RedisUtil中新增scanKeysByPattern方法支持模糊查询key功能
- 优化代码结构，移除冗余的导入包和空行
- 更新类级别的注解配置，添加@Slf4j注解支持日志功能

pom.xml

@@ -39,11 +39,12 @@
         </snapshotRepository>
     </distributionManagement>
     <properties>
+        <spring.profiles.active>sjzx</spring.profiles.active>
         <!--中间件目标地址-->
         <!--                <middle.server.url>10.95.53.49</middle.server.url>-->
-        <middle.server.url>192.168.1.22</middle.server.url>
+        <middle.server.url>192.168.1.103</middle.server.url>
         <!--微服务模块发布地址-->
-        <service.server.url>192.168.1.127</service.server.url>
+        <service.server.url>192.168.2.130</service.server.url>
         <!--docker仓库地址-->
         <docker.server.url>192.168.1.22</docker.server.url>
         <!--nacos的ip:port-->
@@ -51,11 +52,11 @@
         <!--nacos开启鉴权后的用户名-->
         <nacos.username>nacos</nacos.username>
         <!--nacos的ip:port-->
-        <nacos.password>nacos</nacos.password>
+        <nacos.password>njcnpqs</nacos.password>
         <!--服务器发布内容为空-->
-        <!--                <nacos.namespace></nacos.namespace>-->
+        <nacos.namespace>hswbpm</nacos.namespace>
         <!--                <nacos.namespace>30c701c4-2a94-49d9-82e1-76aa9456573f</nacos.namespace>-->
-        <nacos.namespace>78588706-e06f-4580-b612-b26d72493fcb</nacos.namespace>
+        <!--        <nacos.namespace>12b467cc-a7e6-411d-8944-090cbfa09dde</nacos.namespace>-->
         <!--        <nacos.namespace>910d0d69-2254-481b-b9f7-7ecf9cb881b0</nacos.namespace>-->
         <!--        sentinel:port-->
         <sentinel.url>${middle.server.url}:8080</sentinel.url>
@@ -81,6 +82,7 @@
         <springcloud.alibaba.version>2.2.7.RELEASE</springcloud.alibaba.version>
         <hutool.version>5.8.11</hutool.version>
         <knife4j.version>3.0.2</knife4j.version>
+        <postgresql.version>42.3.8</postgresql.version>
         <knife4j.aggregation.version>2.0.8</knife4j.aggregation.version>
         <lombok.version>1.18.18</lombok.version>
         <mybatis.version>2.1.3</mybatis.version>
@@ -171,6 +173,11 @@
                 <artifactId>knife4j-spring-ui</artifactId>
                 <version>${knife4j.version}</version>
             </dependency>
+            <dependency>
+                <groupId>org.postgresql</groupId>
+                <artifactId>postgresql</artifactId>
+                <version>${postgresql.version}</version>
+            </dependency>
             <dependency>
                 <groupId>com.github.xiaoymin</groupId>
                 <artifactId>knife4j-aggregation-spring-boot-starter</artifactId>

pqs-advance/advance-api/src/main/java/com/njcn/advance/api/EventWaveAnalysisFeignClient.java

@@ -2,8 +2,14 @@ package com.njcn.advance.api;
 
 import com.njcn.advance.api.fallback.EventWaveAnalysisFeignClientFallbackFactory;
 import com.njcn.advance.pojo.dto.waveAnalysis.EntityAdvancedData;
+import com.njcn.common.pojo.annotation.OperateInfo;
 import com.njcn.common.pojo.constant.ServerInfo;
+import com.njcn.common.pojo.enums.common.LogEnum;
+import com.njcn.common.pojo.enums.response.CommonResponseEnum;
 import com.njcn.common.pojo.response.HttpResult;
+import com.njcn.common.utils.HttpResultUtil;
+import io.swagger.annotations.ApiImplicitParam;
+import io.swagger.annotations.ApiOperation;
 import org.springframework.cloud.openfeign.FeignClient;
 import org.springframework.web.bind.annotation.PostMapping;
 import org.springframework.web.bind.annotation.RequestParam;
@@ -27,4 +33,7 @@ public interface EventWaveAnalysisFeignClient {
     */
     @PostMapping("analysis")
     HttpResult<EntityAdvancedData> analysis(@RequestParam("eventIndex") String eventIndex);
+
+    @PostMapping("analysisWlEvent")
+    HttpResult<EntityAdvancedData> analysisWlEvent(@RequestParam("eventIndex") String eventIndex);
 }

pqs-advance/advance-api/src/main/java/com/njcn/advance/api/fallback/EventWaveAnalysisFeignClientFallbackFactory.java

@@ -32,6 +32,12 @@ public class EventWaveAnalysisFeignClientFallbackFactory implements FallbackFact
                 log.error("{}异常，降级处理，异常为：{}", "波形高级分析", throwable.toString());
                 throw new BusinessException(finalExceptionEnum);
             }
+
+            @Override
+            public HttpResult<EntityAdvancedData> analysisWlEvent(String eventIndex) {
+                log.error("{}异常，降级处理，异常为：{}", "物联测点波形高级分析异常", throwable.toString());
+                throw new BusinessException(finalExceptionEnum);
+            }
         };
     }
 }

pqs-advance/advance-api/src/main/java/com/njcn/advance/pojo/dto/EventAnalysisDTO.java

@@ -73,4 +73,10 @@ public class EventAnalysisDTO {
      * 1 正常计算
      */
     private Integer typeFlag = 1;
+
+    /**
+     * 文件全路径
+     * 适配物联的暂态事件解析 物联那边事件的路径是全路径，不需要拼接，这个参数可为空
+     */
+    private String wlFilePath;
 }

pqs-advance/advance-api/src/main/java/com/njcn/advance/pojo/dto/waveAnalysis/AnalyWave.java

@@ -26,8 +26,6 @@ import java.util.*;
 public class AnalyWave {
 
 
-
-
     /*****************************************
      * 解析comtrate文件工具类
      * author yexb根据Ww算法装换
@@ -94,7 +92,7 @@ public class AnalyWave {
      ** ** strFilePath *** cfg文件路径
      * *** auth *** 读取方式 null则使用本地读取方式读取
      ******************************************/
-    public AnalyWaveModel.tagDataValue readComtrade(List<String> temCfgList,byte[] array, int iFlag) {
+    public AnalyWaveModel.tagDataValue readComtrade(List<String> temCfgList, byte[] array, int iFlag) {
         //初始化参数
         ComtradeCfg = new AnalyWaveModel.tagComtradeCfg();
         RatesCfg = new AnalyWaveModel.tagRates();
@@ -163,148 +161,145 @@ public class AnalyWave {
         iterable.next();
         String[] strTempArray;// 读取cfg文件
         try {
-                nFreq = 0f;//WW 2019-11-14
+            nFreq = 0f;//WW 2019-11-14
-                String strFileLine = iterable.next();
+            String strFileLine = iterable.next();
+            strTempArray = strFileLine.split(",");
+
+            for (int i = 0; i < strTempArray.length; i++) {
+                switch (i) {
+                    case 0:// 总个数
+                        ComtradeCfg.nChannelNum = Integer.parseInt(strTempArray[i]);
+                        break;
+                    case 1:// 模拟量的个数
+                    {
+                        String str = strTempArray[i].substring(0, strTempArray[i].length() - 1);
+                        ComtradeCfg.nAnalogNum = Integer.parseInt(str);
+                    }
+                    break;
+                    case 2:// 开关量的个数
+                    {
+                        String str = strTempArray[i].substring(0, strTempArray[i].length() - 1);
+                        ComtradeCfg.nDigitalNum = Integer.parseInt(str);
+                    }
+                    break;
+                }
+            }
+
+            // 从第三行到第ComtradeCfg.nChannelNum+3行是模拟量通道和数字量通道
+            for (int i = 0; i < ComtradeCfg.nChannelNum; i++) {
+                AnalyWaveModel.tagOneChannleCfg OneChannlecfg = new AnalyWaveModel.tagOneChannleCfg();
+                ComtradeCfg.OneChannleCfg.add(OneChannlecfg);
+
+                strFileLine = iterable.next();
+                strTempArray = strFileLine.split(",");
+                // 配置总共13项
+                for (int j = 0; j < strTempArray.length; j++) {
+                    switch (j) {
+                        case 0:// 通道序号
+                            OneChannlecfg.nIndex = Integer.parseInt(strTempArray[j]);
+                            break;
+                        case 1:// 通道名称
+                            OneChannlecfg.szChannleName = strTempArray[j];
+                            break;
+                        case 2:// 相位名称
+                            OneChannlecfg.szPhasicName = strTempArray[j];
+                            break;
+                        case 3:// 监视的通道名称
+                            OneChannlecfg.szMonitoredChannleName = strTempArray[j];
+                            break;
+                        case 4:// 通道的单位
+                            OneChannlecfg.szUnitName = strTempArray[j];
+                            break;
+                        case 5:// 通道的系数
+                            OneChannlecfg.fCoefficent = Float.parseFloat(strTempArray[j]);
+                            break;
+                        case 6:// 通道的偏移量
+                            OneChannlecfg.fOffset = Float.parseFloat(strTempArray[j]);
+                            break;
+                        case 7:// 起始采样时间的偏移量
+                            OneChannlecfg.fTimeOffset = Float.parseFloat(strTempArray[j]);
+                            break;
+                        case 8:// 采样值的最小值
+                            OneChannlecfg.nMin = Integer.parseInt(strTempArray[j]);
+                            break;
+                        case 9:// 采样值的最大值
+                            OneChannlecfg.nMax = Integer.parseInt(strTempArray[j]);
+                            break;
+                        case 10:// 一次变比
+                            OneChannlecfg.fPrimary = Float.parseFloat(strTempArray[j]);
+                            break;
+                        case 11:// 二次变比
+                            OneChannlecfg.fSecondary = Float.parseFloat(strTempArray[j]);
+                            break;
+                        case 12:// 一次值还是二次值标志
+                            OneChannlecfg.szValueType = strTempArray[j];
+                            break;
+                    }
+                }
+            }
+            // 采样频率
+            strFileLine = iterable.next();
+            float fFreq = Float.parseFloat(strFileLine);
+            nFreq = (float) fFreq;//WW 2019-11-14
+            // 采样段数
+            strFileLine = iterable.next();
+            int nRates = Integer.parseInt(strFileLine);
+            RatesCfg.nRates = nRates;
+            // 获得每段的采样率
+            long nOffset = 0;
+            for (int i = 0; i < nRates; i++) {
+                strFileLine = iterable.next();
                 strTempArray = strFileLine.split(",");
 
-                for (int i = 0; i < strTempArray.length; i++) {
+                AnalyWaveModel.tagOneRate OneRate = new AnalyWaveModel.tagOneRate();
-                    switch (i) {
+                RatesCfg.OneRate.add(OneRate);
-                        case 0:// 总个数
+
-                            ComtradeCfg.nChannelNum = Integer.parseInt(strTempArray[i]);
+                for (int j = 0; j < strTempArray.length; j++) {
+
+                    switch (j) {
+                        case 0:// 单周波采样点数
+                            OneRate.nOneSample = (int) (Float.parseFloat(strTempArray[j]) / nFreq);//WW 2019-11-14
+                            break;
+                        case 1:// 总点数 //这里的strTemp是一个偏移量
+                            OneRate.nSampleNum = (long) (Float.parseFloat(strTempArray[j]) - nOffset);
+                            nOffset += OneRate.nSampleNum;
                             break;
-                        case 1:// 模拟量的个数
-                        {
-                            String str = strTempArray[i].substring(0, strTempArray[i].length() - 1);
-                            ComtradeCfg.nAnalogNum = Integer.parseInt(str);
-                        }
-                        break;
-                        case 2:// 开关量的个数
-                        {
-                            String str = strTempArray[i].substring(0, strTempArray[i].length() - 1);
-                            ComtradeCfg.nDigitalNum = Integer.parseInt(str);
-                        }
-                        break;
                     }
                 }
+            }
 
-                // 从第三行到第ComtradeCfg.nChannelNum+3行是模拟量通道和数字量通道
+            SimpleDateFormat sdf = new SimpleDateFormat("dd/MM/yyyy HH:mm:ss.SSS");
-                for (int i = 0; i < ComtradeCfg.nChannelNum; i++) {
+            // 波形起始时间
-                    AnalyWaveModel.tagOneChannleCfg OneChannlecfg = new AnalyWaveModel.tagOneChannleCfg();
+            strFileLine = iterable.next();
-                    ComtradeCfg.OneChannleCfg.add(OneChannlecfg);
+            strFileLine = strFileLine.substring(0, strFileLine.length() - 3).replace(",", " ");
-
+            TimeTrige = sdf.parse(strFileLine);
-                    strFileLine = iterable.next();
+            // 暂态触发时间
-                    strTempArray = strFileLine.split(",");
+            strFileLine = iterable.next();
-                    // 配置总共13项
+            strFileLine = strFileLine.substring(0, strFileLine.length() - 3).replace(",", " ");
-                    for (int j = 0; j < strTempArray.length; j++) {
+            TimeWave = sdf.parse(strFileLine);
-                        switch (j) {
-                            case 0:// 通道序号
-                                OneChannlecfg.nIndex = Integer.parseInt(strTempArray[j]);
-                                break;
-                            case 1:// 通道名称
-                                OneChannlecfg.szChannleName = strTempArray[j];
-                                break;
-                            case 2:// 相位名称
-                                OneChannlecfg.szPhasicName = strTempArray[j];
-                                break;
-                            case 3:// 监视的通道名称
-                                OneChannlecfg.szMonitoredChannleName = strTempArray[j];
-                                break;
-                            case 4:// 通道的单位
-                                OneChannlecfg.szUnitName = strTempArray[j];
-                                break;
-                            case 5:// 通道的系数
-                                OneChannlecfg.fCoefficent = Float.parseFloat(strTempArray[j]);
-                                break;
-                            case 6:// 通道的偏移量
-                                OneChannlecfg.fOffset = Float.parseFloat(strTempArray[j]);
-                                break;
-                            case 7:// 起始采样时间的偏移量
-                                OneChannlecfg.fTimeOffset = Float.parseFloat(strTempArray[j]);
-                                break;
-                            case 8:// 采样值的最小值
-                                OneChannlecfg.nMin = Integer.parseInt(strTempArray[j]);
-                                break;
-                            case 9:// 采样值的最大值
-                                OneChannlecfg.nMax = Integer.parseInt(strTempArray[j]);
-                                break;
-                            case 10:// 一次变比
-                                OneChannlecfg.fPrimary = Float.parseFloat(strTempArray[j]);
-                                break;
-                            case 11:// 二次变比
-                                OneChannlecfg.fSecondary = Float.parseFloat(strTempArray[j]);
-                                break;
-                            case 12:// 一次值还是二次值标志
-                                OneChannlecfg.szValueType = strTempArray[j];
-                                break;
-                        }
-                    }
-                }
-                // 采样频率
-                strFileLine = iterable.next();
-                float fFreq = Float.parseFloat(strFileLine);
-                nFreq = (float) fFreq;//WW 2019-11-14
-                // 采样段数
-                strFileLine = iterable.next();
-                int nRates = Integer.parseInt(strFileLine);
-                RatesCfg.nRates = nRates;
-                // 获得每段的采样率
-                long nOffset = 0;
-                for (int i = 0; i < nRates; i++) {
-                    strFileLine = iterable.next();
-                    strTempArray = strFileLine.split(",");
-
-                    AnalyWaveModel.tagOneRate OneRate = new AnalyWaveModel.tagOneRate();
-                    RatesCfg.OneRate.add(OneRate);
-
-                    for (int j = 0; j < strTempArray.length; j++) {
-
-                        switch (j) {
-                            case 0:// 单周波采样点数
-                                OneRate.nOneSample = (int) (Float.parseFloat(strTempArray[j]) / nFreq);//WW 2019-11-14
-                                break;
-                            case 1:// 总点数 //这里的strTemp是一个偏移量
-                                OneRate.nSampleNum = (long) (Float.parseFloat(strTempArray[j]) - nOffset);
-                                nOffset += OneRate.nSampleNum;
-                                break;
-                        }
-                    }
-                }
-
-                SimpleDateFormat sdf = new SimpleDateFormat("dd/MM/yyyy HH:mm:ss.SSS");
-                // 波形起始时间
-                strFileLine = iterable.next();
-                strFileLine = strFileLine.substring(0, strFileLine.length() - 3).replace(",", " ");
-                TimeTrige = sdf.parse(strFileLine);
-                // 暂态触发时间
-                strFileLine = iterable.next();
-                strFileLine = strFileLine.substring(0, strFileLine.length() - 3).replace(",", " ");
-                TimeWave = sdf.parse(strFileLine);
-
-                Calendar calendar = Calendar.getInstance();
-                calendar.setTime(TimeWave);
-                firstMs = calendar.get(Calendar.MILLISECOND);
-                firstTime = calendar.getTime();
-
-                long a = TimeWave.getTime();
-                long b = TimeTrige.getTime();
-                int c = (int) (a - b);
-                if (c >= 90 && c <= 110) {
-                    iPush = 100;
-                } else if (c >= 190 && c <= 210) {
-                    iPush = 200;
-                }
-                // 赋值编码格式（二进制）
-                strBinType = iterable.next().toUpperCase();
 
+            Calendar calendar = Calendar.getInstance();
+            calendar.setTime(TimeWave);
+            firstMs = calendar.get(Calendar.MILLISECOND);
+            firstTime = calendar.getTime();
 
+            long a = TimeWave.getTime();
+            long b = TimeTrige.getTime();
+            int c = (int) (a - b);
+            if (c >= 90 && c <= 110) {
+                iPush = 100;
+            } else if (c >= 190 && c <= 210) {
+                iPush = 200;
+            }
+            // 赋值编码格式（二进制）
+            strBinType = iterable.next().toUpperCase();
 
 
         } catch (Exception e) {
             e.printStackTrace();
-            logger.error("读取文件内容出错"+e.getMessage());
+            logger.error("读取文件内容出错" + e.getMessage());
             return false;
-        }finally {
+        } finally {
-
 
 
         }
@@ -319,15 +314,8 @@ public class AnalyWave {
     private List<List<Float>> AnalyseComtradeDat(byte[] array, int iFlag) {
         float xValueAll = 0;//初始化xValue的值
         boolean blxValue = false;//判断是否首次登陆
-
         List<List<Float>> listWaveData = new ArrayList<>();//返回数据
-
-
         try {
-
-
-
-
             // 计算每个单独的数据块的大小 4字节的序号 4字节的时间 2字节的值
             // 示例中的排布是 4字节的序号 4字节的时间 UA(2字节) UB(2字节) UC(2字节) IA(2字节) IB(2字节)
             // IC(2字节)
@@ -470,7 +458,7 @@ public class AnalyWave {
                             {
                                 if (ComtradeCfg.OneChannleCfg.get(j).fPrimary != 0.0f)//根据cfg内的变比，将一次值转换成二次值
                                 {
-                                    fValue = ComtradeCfg.OneChannleCfg.get(j).fSecondary / ComtradeCfg.OneChannleCfg.get(j).fPrimary;
+                                    fValue = fValue * ComtradeCfg.OneChannleCfg.get(j).fSecondary / ComtradeCfg.OneChannleCfg.get(j).fPrimary;
                                 } else {
                                     fValue = fValue;
                                 }
@@ -500,7 +488,7 @@ public class AnalyWave {
         } catch (Exception e) {
             logger.error("读取文件出错：" + e.getMessage());
             return listWaveData;
-        }finally {
+        } finally {
 
         }
 

pqs-advance/advance-api/src/main/java/com/njcn/advance/pojo/dto/waveAnalysis/BackData.java

@@ -47,7 +47,7 @@ import java.util.List;
  * angle_diff_cn C相相位负跳变
  * bph_max_value 不平衡度（单位%）
  */
-@JsonIgnoreProperties(ignoreUnknown = true)
+@JsonIgnoreProperties(ignoreUnknown = true,value = {"pointer"})
 public class BackData extends Structure {
 	public int qvvr_cata_cause[] = new int[256];
 	public int qvvr_phasetype[] = new int[256];

pqs-advance/advance-api/src/main/java/com/njcn/advance/pojo/dto/waveAnalysis/CauseStruct.java

@@ -23,8 +23,13 @@ public class CauseStruct extends Structure {
 	public static class ByValue extends CauseStruct implements Structure.ByValue {
 	}
 
+//	@Override
+//	protected List<String> getFieldOrder() { // 返回值填入的顺序
+//		return Arrays.asList(new String[] { "cause", "no_cal" });
+//	}
+
 	@Override
-	protected List<String> getFieldOrder() { // 返回值填入的顺序
+	protected List<String> getFieldOrder() {
-		return Arrays.asList(new String[] { "cause", "no_cal" });
+		return Arrays.asList("smp_va", "smp_vb", "smp_vc", "smp_rate", "smp_len", "threshold", "cause", "no_cal");
 	}
 }

pqs-advance/advance-api/src/main/java/com/njcn/advance/pojo/dto/waveAnalysis/Rect.java

@@ -35,8 +35,13 @@ public class Rect extends Structure {
 
 	}
 
+//	@Override
+//	protected List<String> getFieldOrder() {
+//		return Arrays.asList(new String[] { "evt_num","evt_buf" });
+//	}
+
 	@Override
 	protected List<String> getFieldOrder() {
-		return Arrays.asList(new String[] { "evt_num","evt_buf" });
+		return Arrays.asList("smp_va", "smp_vb", "smp_vc", "smp_rate", "smp_len", "evt_num", "evt_buf");
 	}
 }

pqs-advance/advance-boot/src/main/java/com/njcn/advance/controller/EventRelevantAnalysisController.java

@@ -83,10 +83,10 @@ public class EventRelevantAnalysisController extends BaseController {
     public HttpResult<Page<RmpEventDetailAssPO>> queryEventsAssPage(@RequestBody BaseParam baseParam){
         String methodDescribe = getMethodDescribe("queryEventsAssPage");
         String searchValue = baseParam.getSearchValue();
-        Pattern pattern = Pattern.compile(PatternRegex.SPECIAL_REGEX);
+//        Pattern pattern = Pattern.compile(PatternRegex.SPECIAL_REGEX);
-        if(pattern.matcher(searchValue).find()){
+//        if(pattern.matcher(searchValue).find()){
-            throw new BusinessException(ValidMessage.SPECIAL_REGEX);
+//            throw new BusinessException(ValidMessage.SPECIAL_REGEX);
-        }
+//        }
         Page<RmpEventDetailAssPO> page = eventRelevantAnalysisService.queryEventsAssPage(baseParam);
         return HttpResultUtil.assembleCommonResponseResult(CommonResponseEnum.SUCCESS, page, methodDescribe);
     }

pqs-advance/advance-boot/src/main/java/com/njcn/advance/controller/EventWaveAnalysisController.java

@@ -34,7 +34,6 @@ public class EventWaveAnalysisController extends BaseController {
 
     private final EventWaveAnalysisService eventWaveAnalysisService;
 
-
     @PostMapping("analysis")
     @OperateInfo(info = LogEnum.BUSINESS_COMMON)
     @ApiOperation("波形高级分析")
@@ -43,6 +42,15 @@ public class EventWaveAnalysisController extends BaseController {
         String methodDescribe = getMethodDescribe("analysis");
         EntityAdvancedData entityAdvancedData = eventWaveAnalysisService.analysis(eventIndex);
         return HttpResultUtil.assembleCommonResponseResult(CommonResponseEnum.SUCCESS, entityAdvancedData, methodDescribe);
+    }
 
+    @PostMapping("analysisWlEvent")
+    @OperateInfo(info = LogEnum.BUSINESS_COMMON)
+    @ApiOperation("物联事件波形高级分析")
+    @ApiImplicitParam(name = "eventIndex", value = "暂降事件id", required = true)
+    public HttpResult<EntityAdvancedData> analysisWlEvent(@RequestParam("eventIndex") String eventIndex) {
+        String methodDescribe = getMethodDescribe("analysisWlEvent");
+        EntityAdvancedData entityAdvancedData = eventWaveAnalysisService.analysisWlEvent(eventIndex);
+        return HttpResultUtil.assembleCommonResponseResult(CommonResponseEnum.SUCCESS, entityAdvancedData, methodDescribe);
     }
 }

pqs-advance/advance-boot/src/main/java/com/njcn/advance/event/cause/jna/QvvrCauseDLL.java

@@ -67,7 +67,9 @@ public interface QvvrCauseDLL extends Library {
 
         // 创建临时文件
         String tempDir = System.getProperty("java.io.tmpdir");
-        File tempLibFile = new File(tempDir, "qvvr_" + System.currentTimeMillis() + "_" + libFileName);
+        File tempLibFile = new File(tempDir, libFileName);
+
+        //File tempLibFile = new File(tempDir, "qvvr_" + System.currentTimeMillis() + "_" + libFileName);
 
         // 提取库文件到临时目录
         try (FileOutputStream out = new FileOutputStream(tempLibFile)) {

pqs-advance/advance-boot/src/main/java/com/njcn/advance/event/service/impl/EventAdvanceServiceImpl.java

@@ -1,14 +1,14 @@
 package com.njcn.advance.event.service.impl;
 
 import cn.hutool.core.util.StrUtil;
-import com.njcn.advance.event.cause.core.VoltageSagAnalyzer;
+import com.njcn.advance.enums.EnumEvt;
 import com.njcn.advance.event.cause.jna.QvvrCauseDLL;
-import com.njcn.advance.event.cause.model.AnalysisResult;
 import com.njcn.advance.event.cause.model.DataFeature;
-import com.njcn.advance.event.cause.model.QvvrDataStruct;
+import com.njcn.advance.event.type.jna.*;
 import com.njcn.advance.pojo.dto.EventAnalysisDTO;
 import com.njcn.advance.event.service.IEventAdvanceService;
-import com.njcn.advance.event.type.jna.QvvrDLL;
+import com.njcn.advance.pojo.dto.waveAnalysis.Rect;
+import com.njcn.advance.utils.Utils;
 import com.njcn.common.config.GeneralInfo;
 import com.njcn.common.pojo.exception.BusinessException;
 import com.njcn.event.file.component.WaveFileComponent;
@@ -21,6 +21,7 @@ import lombok.RequiredArgsConstructor;
 import lombok.extern.slf4j.Slf4j;
 import org.springframework.stereotype.Service;
 
+import java.io.ByteArrayInputStream;
 import java.io.File;
 import java.io.InputStream;
 import java.util.List;
@@ -47,11 +48,12 @@ public class EventAdvanceServiceImpl implements IEventAdvanceService {
     public EventAnalysisDTO analysisCauseAndType(EventAnalysisDTO eventAnalysis) {
         WaveDataDTO waveDataDTO;
         String waveName = eventAnalysis.getWaveName();
+        String wlFilePath = eventAnalysis.getWlFilePath();
         String cfgPath, datPath, cfgPath2, datPath2;
         String ip = eventAnalysis.getIp();
         if (generalInfo.getBusinessWaveFileStorage() == GeneralConstant.LOCAL_DISK) {
-            cfgPath = generalInfo.getBusinessWavePath() + File.separator + ip + File.separator + waveName + GeneralConstant.CFG;
+            cfgPath = Objects.isNull(wlFilePath) ? generalInfo.getBusinessWavePath() + File.separator + ip + File.separator + waveName + GeneralConstant.CFG : wlFilePath + GeneralConstant.CFG;
-            datPath = generalInfo.getBusinessWavePath() + File.separator + ip + File.separator + waveName + GeneralConstant.DAT;
+            datPath = Objects.isNull(wlFilePath) ? generalInfo.getBusinessWavePath() + File.separator + ip + File.separator + waveName + GeneralConstant.DAT : wlFilePath + GeneralConstant.DAT;
             log.info("本地磁盘波形文件路径----" + cfgPath);
             InputStream cfgStream = waveFileComponent.getFileInputStreamByFilePath(cfgPath);
             InputStream datStream = waveFileComponent.getFileInputStreamByFilePath(datPath);
@@ -60,11 +62,11 @@ public class EventAdvanceServiceImpl implements IEventAdvanceService {
             }
             waveDataDTO = waveFileComponent.getComtrade(cfgStream, datStream, 0);
         } else {
-            cfgPath = OssPath.WAVE_DIR + ip + StrUtil.SLASH + waveName + GeneralConstant.CFG;
+            cfgPath = Objects.isNull(wlFilePath) ? OssPath.WAVE_DIR + ip + StrUtil.SLASH + waveName + GeneralConstant.CFG : wlFilePath + GeneralConstant.CFG;
-            datPath = OssPath.WAVE_DIR + ip + StrUtil.SLASH + waveName + GeneralConstant.DAT;
+            datPath = Objects.isNull(wlFilePath) ? OssPath.WAVE_DIR + ip + StrUtil.SLASH + waveName + GeneralConstant.DAT : wlFilePath + GeneralConstant.DAT;
             //适配文件后缀小写
-            cfgPath2 = OssPath.WAVE_DIR + ip + StrUtil.SLASH + waveName + GeneralConstant.CFG.toLowerCase();
+            cfgPath2 = Objects.isNull(wlFilePath) ? OssPath.WAVE_DIR + ip + StrUtil.SLASH + waveName + GeneralConstant.CFG.toLowerCase() : wlFilePath + GeneralConstant.CFG.toLowerCase();
-            datPath2 = OssPath.WAVE_DIR + ip + StrUtil.SLASH + waveName + GeneralConstant.DAT.toLowerCase();
+            datPath2 = Objects.isNull(wlFilePath) ? OssPath.WAVE_DIR + ip + StrUtil.SLASH + waveName + GeneralConstant.DAT.toLowerCase() : wlFilePath + GeneralConstant.DAT.toLowerCase();
             log.info("文件服务器波形文件路径----" + cfgPath);
             try (
                     InputStream cfgStream = fileStorageUtil.getFileStream(cfgPath);
@@ -73,7 +75,7 @@ public class EventAdvanceServiceImpl implements IEventAdvanceService {
                 if (Objects.isNull(cfgStream) || Objects.isNull(datStream)) {
                     throw new BusinessException(WaveFileResponseEnum.ANALYSE_WAVE_NOT_FOUND);
                 }
-                waveDataDTO = waveFileComponent.getComtrade(cfgStream, datStream, 0);
+                waveDataDTO = waveFileComponent.getComtradeNoAddPoints(cfgStream, datStream, 0);
             } catch (Exception e) {
                 try {
                     InputStream cfgStream = fileStorageUtil.getFileStream(cfgPath2);
@@ -89,8 +91,70 @@ public class EventAdvanceServiceImpl implements IEventAdvanceService {
             }
         }
         List<List<Float>> listWaveData = waveDataDTO.getListWaveData();
+        // 暂降类型
+        // 创建数据结构
+        QvvrDLL.QvvrDataStruct typeDataStruct = new QvvrDLL.QvvrDataStruct();
+        System.out.println("初始化qvvrdll成功-----------");
+        typeDataStruct.smp_rate = waveDataDTO.getComtradeCfgDTO().getFinalSampleRate();
+        System.out.println("采样率-----------" + typeDataStruct.smp_rate);
+        typeDataStruct.smp_len = listWaveData.size();
+        System.out.println("波形长度-----------" + listWaveData.size());
+
+        // 获取ABC三相的瞬时数据
+        for (int i = 0; i < listWaveData.size(); i++) {
+            typeDataStruct.smp_va[i] = listWaveData.get(i).get(1);
+            typeDataStruct.smp_vb[i] = listWaveData.get(i).get(2);
+            typeDataStruct.smp_vc[i] = listWaveData.get(i).get(3);
+        }
+
+
+        // 执行算法分析 - 直接调用C DLL
+        try {
+            QvvrDLL.INSTANCE.qvvr_fun(typeDataStruct);
+            System.out.println("调用qvvrdll成功-----------");
+
+            if (typeDataStruct.evt_num > 0) {
+                // 全局比较找出最小三相电压特征值
+                float globalMinVoltage = Float.MAX_VALUE;
+                int globalFaultType = 10;
+                for (int i = 0; i < typeDataStruct.evt_num; i++) {
+                    QvvrDLL.EventBuffer evt = typeDataStruct.evt_buf[i];
+                    for (int j = 0; j < evt.u_min_num; j++) {
+                        float u3min = evt.u3_min[j];
+                        if (u3min < globalMinVoltage) {
+                            globalMinVoltage = u3min;
+                            globalFaultType = evt.qvvr_cata_type[j];
+                        }
+                    }
+                }
+                String str = WriteData2File(typeDataStruct);
+                if (Objects.isNull(wlFilePath)) {
+                    String hdrPath = OssPath.WAVE_DIR + ip+StrUtil.SLASH;
+                    String hdrName =  waveName + GeneralConstant.HDR_LOWER;
+                    fileStorageUtil.uploadStreamSpecifyName(new ByteArrayInputStream(str.getBytes()),hdrPath,hdrName);
+                } else {
+                    //  comtrade/00:B7:8D:00:A8:7A/PQMonitor_PQM1_00100_20260204_162453_071_WAV.hdr
+                    String fullPath =  wlFilePath + GeneralConstant.HDR_LOWER;
+                    int lastSlashIndex = fullPath.lastIndexOf('/');
+                    String hdrPath = fullPath.substring(0, lastSlashIndex + 1);
+                    String hdrName = fullPath.substring(lastSlashIndex + 1);
+                    fileStorageUtil.uploadStreamSpecifyName(new ByteArrayInputStream(str.getBytes()),hdrPath,hdrName);
+                }
+
+                //上传HR
+                eventAnalysis.setType(globalFaultType);
+            } else {
+                eventAnalysis.setType(DataFeature.TYPE10);
+            }
+            System.out.println("结束qvvrdll方法调用-----------");
+        } catch (Exception e) {
+            eventAnalysis.setType(DataFeature.TYPE10);
+            eventAnalysis.setTypeFlag(0);
+        }
+
+
         // 暂降原因JNA的方式
-        com.njcn.advance.event.cause.jna.QvvrCauseDLL.QvvrDataStruct causeDataStruct = new com.njcn.advance.event.cause.jna.QvvrCauseDLL.QvvrDataStruct();
+        QvvrCauseDLL.QvvrDataStruct causeDataStruct = new QvvrCauseDLL.QvvrDataStruct();
         causeDataStruct.smp_rate = waveDataDTO.getComtradeCfgDTO().getFinalSampleRate();
         causeDataStruct.smp_len = listWaveData.size();
         // 获取ABC三相的瞬时数据
@@ -112,45 +176,308 @@ public class EventAdvanceServiceImpl implements IEventAdvanceService {
         }
         System.out.println("暂降原因分析完毕===============");
         System.out.println("cause:" + eventAnalysis);
-
-        // 暂降类型
-        // 创建数据结构
-//        com.njcn.advance.event.type.jna.QvvrDLL.QvvrDataStruct typeDataStruct = new com.njcn.advance.event.type.jna.QvvrDLL.QvvrDataStruct();
-//        typeDataStruct.smp_rate = waveDataDTO.getComtradeCfgDTO().getFinalSampleRate();
-//        typeDataStruct.smp_len = listWaveData.size();
-//        // 获取ABC三相的瞬时数据
-//        for (int i = 0; i < listWaveData.size(); i++) {
-//            typeDataStruct.smp_va[i] = listWaveData.get(i).get(1);
-//            typeDataStruct.smp_vb[i] = listWaveData.get(i).get(2);
-//            typeDataStruct.smp_vc[i] = listWaveData.get(i).get(3);
-//        }
-//        // 执行算法分析 - 直接调用C DLL
-//        try {
-//            QvvrDLL.INSTANCE.qvvr_fun(typeDataStruct);
-//            if (typeDataStruct.evt_num > 0) {
-//                // 全局比较找出最小三相电压特征值
-//                float globalMinVoltage = Float.MAX_VALUE;
-//                int globalFaultType = 10;
-//                for (int i = 0; i < typeDataStruct.evt_num; i++) {
-//                    QvvrDLL.EventBuffer evt = typeDataStruct.evt_buf[i];
-//                    for (int j = 0; j < evt.u_min_num; j++) {
-//                        float u3min = evt.u3_min[j];
-//                        if (u3min < globalMinVoltage) {
-//                            globalMinVoltage = u3min;
-//                            globalFaultType = evt.qvvr_cata_type[j];
-//                        }
-//                    }
-//                }
-//                eventAnalysis.setType(globalFaultType);
-//            } else {
-//                eventAnalysis.setType(DataFeature.TYPE10);
-//            }
-//        } catch (Exception e) {
-//            eventAnalysis.setType(DataFeature.TYPE10);
-//            eventAnalysis.setTypeFlag(0);
-//        }
         return eventAnalysis;
     }
 
+    public String WriteData2File(QvvrDLL.QvvrDataStruct rect) throws Exception {
+        StringBuilder stringBuilder = new StringBuilder("{" + EnumEvt.NEWLINE.getProperty());
+
+        /**
+         * @写入返回事件总数
+         */
+        stringBuilder.append(EnumEvt.setEvtProperty(EnumEvt.EVT_NUM.getProperty()));
+        stringBuilder.append(EnumEvt.setEnter(Utils.int2String(rect.evt_num), 1));
+        stringBuilder.append(EnumEvt.setEvtProperty(EnumEvt.EVT_BUF.getProperty()) + "[");
+
+        /**
+         * @写入返回事件参数
+         */
+        for (int i = 0; i < rect.evt_num; i++) {
+            stringBuilder.append(EnumEvt.setNewLine() + EnumEvt.setTab(2));
+            /**
+             * @波形起始点
+             */
+            stringBuilder.append(EnumEvt.setEvtProperty(EnumEvt.POW_A.getProperty()));
+            stringBuilder.append(EnumEvt.setEnter(Utils.float2String(rect.evt_buf[i].POW_a), 3));
+            stringBuilder.append(EnumEvt.setEvtProperty(EnumEvt.POW_B.getProperty()));
+            stringBuilder.append(EnumEvt.setEnter(Utils.float2String(rect.evt_buf[i].POW_b), 3));
+            stringBuilder.append(EnumEvt.setEvtProperty(EnumEvt.POW_C.getProperty()));
+            stringBuilder.append(EnumEvt.setEnter(Utils.float2String(rect.evt_buf[i].POW_c), 3));
+            /**
+             * @跳变段电压变化率
+             */
+            stringBuilder.append(EnumEvt.setEvtProperty(EnumEvt.VOLTAGECHANGE_VA.getProperty()));
+            stringBuilder.append(EnumEvt.setEnter(Utils.float2String(rect.evt_buf[i].Voltagechange_Va), 3));
+            stringBuilder.append(EnumEvt.setEvtProperty(EnumEvt.VOLTAGECHANGE_VB.getProperty()));
+            stringBuilder.append(EnumEvt.setEnter(Utils.float2String(rect.evt_buf[i].Voltagechange_Vb), 3));
+            stringBuilder.append(EnumEvt.setEvtProperty(EnumEvt.VOLTAGECHANGE_VC.getProperty()));
+            stringBuilder.append(EnumEvt.setEnter(Utils.float2String(rect.evt_buf[i].Voltagechange_Vc), 3));
+            /**
+             * @持续时间
+             */
+            stringBuilder.append(EnumEvt.setEvtProperty(EnumEvt.HOLD_TIME_RMS.getProperty()));
+            stringBuilder.append(EnumEvt.setEnter(Utils.float2String(rect.evt_buf[i].hold_time_rms), 3));
+            stringBuilder.append(EnumEvt.setEvtProperty(EnumEvt.HOLD_TIME_DQ.getProperty()));
+            stringBuilder.append(EnumEvt.setEnter(Utils.float2String(rect.evt_buf[i].hold_time_dq), 3));
+            /**
+             * @分段数目
+             */
+            stringBuilder.append(EnumEvt.setEvtProperty(EnumEvt.SEG_T_NUM.getProperty()));
+            stringBuilder.append(EnumEvt.setEnter(Utils.int2String(rect.evt_buf[i].SEG_T_num), 3));
+            stringBuilder.append(EnumEvt.setEvtProperty(EnumEvt.SEG_T_IDX.getProperty()));
+            stringBuilder.append(EnumEvt.setNewLine() + EnumEvt.setTab(3));
+
+            for (int j = 0; j < rect.evt_buf[i].SEG_T_num; j++) {
+                stringBuilder.append(EnumEvt.setEvtProperty(Utils.int2String(j)));
+
+                if (rect.evt_buf[i].SEG_T_num - 1 == j) {
+                    stringBuilder.append(Utils.int2String(rect.evt_buf[i].SEG_T_idx[j]));
+                } else {
+                    stringBuilder.append(EnumEvt.setEnter(Utils.int2String(rect.evt_buf[i].SEG_T_idx[j]), 4));
+                }
+            }
+
+            stringBuilder.append(EnumEvt.setEnter(EnumEvt.setClose(3), 3));
+
+            /**
+             * @特征幅值
+             */
+            stringBuilder.append(EnumEvt.setEvtProperty(EnumEvt.U_MIN_NUM.getProperty()));
+            stringBuilder.append(EnumEvt.setEnter(Utils.int2String(rect.evt_buf[i].u_min_num), 3));
+
+            /**
+             * @最小值位置
+             */
+            for (int k = 0; k < rect.evt_buf[i].u_min_num; k++) {
+                setEigenVlaue(k, stringBuilder, EnumEvt.ORDER_MIN_IDX.getProperty(), null,
+                        rect.evt_buf[i].order_min_idx[k]);
+
+                if (rect.evt_buf[i].u_min_num - 1 == k) {
+                    stringBuilder.delete(stringBuilder.lastIndexOf(","), stringBuilder.length() - 1);
+                }
+            }
+
+            stringBuilder.append(EnumEvt.setEnter(EnumEvt.setClose(3), 3));
+
+            /**
+             * @A相电压特征值
+             */
+            for (int k = 0; k < rect.evt_buf[i].u_min_num; k++) {
+                setEigenVlaue(k, stringBuilder, EnumEvt.UA_MIN.getProperty(), rect.evt_buf[i].ua_min[k], null);
+
+                if (rect.evt_buf[i].u_min_num - 1 == k) {
+                    stringBuilder.delete(stringBuilder.lastIndexOf(","), stringBuilder.length() - 1);
+                }
+            }
+
+            stringBuilder.append(EnumEvt.setEnter(EnumEvt.setClose(3), 3));
+
+            /**
+             * @B相电压特征值
+             */
+            for (int k = 0; k < rect.evt_buf[i].u_min_num; k++) {
+                setEigenVlaue(k, stringBuilder, EnumEvt.UB_MIN.getProperty(), rect.evt_buf[i].ub_min[k], null);
+
+                if (rect.evt_buf[i].u_min_num - 1 == k) {
+                    stringBuilder.delete(stringBuilder.lastIndexOf(","), stringBuilder.length() - 1);
+                }
+            }
+
+            stringBuilder.append(EnumEvt.setEnter(EnumEvt.setClose(3), 3));
+
+            /**
+             * @C相电压特征值
+             */
+            for (int k = 0; k < rect.evt_buf[i].u_min_num; k++) {
+                setEigenVlaue(k, stringBuilder, EnumEvt.UC_MIN.getProperty(), rect.evt_buf[i].uc_min[k], null);
+
+                if (rect.evt_buf[i].u_min_num - 1 == k) {
+                    stringBuilder.delete(stringBuilder.lastIndexOf(","), stringBuilder.length() - 1);
+                }
+            }
+
+            stringBuilder.append(EnumEvt.setEnter(EnumEvt.setClose(3), 3));
+
+            /**
+             * @三相电压特征值
+             */
+            for (int k = 0; k < rect.evt_buf[i].u_min_num; k++) {
+                setEigenVlaue(k, stringBuilder, EnumEvt.U3_MIN.getProperty(), rect.evt_buf[i].u3_min[k], null);
+
+                if (rect.evt_buf[i].u_min_num - 1 == k) {
+                    stringBuilder.delete(stringBuilder.lastIndexOf(","), stringBuilder.length() - 1);
+                }
+            }
+
+            stringBuilder.append(EnumEvt.setEnter(EnumEvt.setClose(3), 3));
+
+            /**
+             * @A相相位正跳变
+             */
+            for (int k = 0; k < rect.evt_buf[i].u_min_num; k++) {
+                setEigenVlaue(k, stringBuilder, EnumEvt.ANGLE_DIFF_AP.getProperty(), rect.evt_buf[i].angle_diff_ap[k],
+                        null);
+
+                if (rect.evt_buf[i].u_min_num - 1 == k) {
+                    stringBuilder.delete(stringBuilder.lastIndexOf(","), stringBuilder.length() - 1);
+                }
+            }
+
+            stringBuilder.append(EnumEvt.setEnter(EnumEvt.setClose(3), 3));
+
+            /**
+             * @B相相位正跳变
+             */
+            for (int k = 0; k < rect.evt_buf[i].u_min_num; k++) {
+                setEigenVlaue(k, stringBuilder, EnumEvt.ANGLE_DIFF_BP.getProperty(), rect.evt_buf[i].angle_diff_bp[k],
+                        null);
+
+                if (rect.evt_buf[i].u_min_num - 1 == k) {
+                    stringBuilder.delete(stringBuilder.lastIndexOf(","), stringBuilder.length() - 1);
+                }
+            }
+
+            stringBuilder.append(EnumEvt.setEnter(EnumEvt.setClose(3), 3));
+
+            /**
+             * @C相相位正跳变
+             */
+            for (int k = 0; k < rect.evt_buf[i].u_min_num; k++) {
+                setEigenVlaue(k, stringBuilder, EnumEvt.ANGLE_DIFF_CP.getProperty(), rect.evt_buf[i].angle_diff_cp[k],
+                        null);
+
+                if (rect.evt_buf[i].u_min_num - 1 == k) {
+                    stringBuilder.delete(stringBuilder.lastIndexOf(","), stringBuilder.length() - 1);
+                }
+            }
+
+            stringBuilder.append(EnumEvt.setEnter(EnumEvt.setClose(3), 3));
+
+            /**
+             * @A相相位负跳变
+             */
+            for (int k = 0; k < rect.evt_buf[i].u_min_num; k++) {
+                setEigenVlaue(k, stringBuilder, EnumEvt.ANGLE_DIFF_AN.getProperty(), rect.evt_buf[i].angle_diff_an[k],
+                        null);
+
+                if (rect.evt_buf[i].u_min_num - 1 == k) {
+                    stringBuilder.delete(stringBuilder.lastIndexOf(","), stringBuilder.length() - 1);
+                }
+            }
+
+            stringBuilder.append(EnumEvt.setEnter(EnumEvt.setClose(3), 3));
+
+            /**
+             * @B相相位负跳变
+             */
+            for (int k = 0; k < rect.evt_buf[i].u_min_num; k++) {
+                setEigenVlaue(k, stringBuilder, EnumEvt.ANGLE_DIFF_BN.getProperty(), rect.evt_buf[i].angle_diff_bn[k],
+                        null);
+
+                if (rect.evt_buf[i].u_min_num - 1 == k) {
+                    stringBuilder.delete(stringBuilder.lastIndexOf(","), stringBuilder.length() - 1);
+                }
+            }
+
+            stringBuilder.append(EnumEvt.setEnter(EnumEvt.setClose(3), 3));
+
+            /**
+             * @C相相位负跳变
+             */
+            for (int k = 0; k < rect.evt_buf[i].u_min_num; k++) {
+                setEigenVlaue(k, stringBuilder, EnumEvt.ANGLE_DIFF_CN.getProperty(), rect.evt_buf[i].angle_diff_cn[k],
+                        null);
+
+                if (rect.evt_buf[i].u_min_num - 1 == k) {
+                    stringBuilder.delete(stringBuilder.lastIndexOf(","), stringBuilder.length() - 1);
+                }
+            }
+
+            stringBuilder.append(EnumEvt.setEnter(EnumEvt.setClose(3), 3));
+
+            /**
+             * @不平衡度
+             */
+            for (int k = 0; k < rect.evt_buf[i].u_min_num; k++) {
+                setEigenVlaue(k, stringBuilder, EnumEvt.BPH_MAX_VALUE.getProperty(), rect.evt_buf[i].bph_max_value[k],
+                        null);
+
+                if (rect.evt_buf[i].u_min_num - 1 == k) {
+                    stringBuilder.delete(stringBuilder.lastIndexOf(","), stringBuilder.length() - 1);
+                }
+            }
+
+            stringBuilder.append(EnumEvt.setEnter(EnumEvt.setClose(3), 3));
+
+            /**
+             * @暂降原因
+             */
+            for (int k = 0; k < rect.evt_buf[i].u_min_num; k++) {
+                setEigenVlaue(k, stringBuilder, EnumEvt.QVVR_CATA_CAUSE.getProperty(), null,
+                        rect.evt_buf[i].qvvr_cata_cause[k]);
+
+                if (rect.evt_buf[i].u_min_num - 1 == k) {
+                    stringBuilder.delete(stringBuilder.lastIndexOf(","), stringBuilder.length() - 1);
+                }
+            }
+
+            stringBuilder.append(EnumEvt.setEnter(EnumEvt.setClose(3), 3));
+
+            /**
+             * @暂降类型
+             */
+            for (int k = 0; k < rect.evt_buf[i].u_min_num; k++) {
+                setEigenVlaue(k, stringBuilder, EnumEvt.QVVR_CATA_TYPE.getProperty(), null,
+                        rect.evt_buf[i].qvvr_cata_type[k]);
+
+                if (rect.evt_buf[i].u_min_num - 1 == k) {
+                    stringBuilder.delete(stringBuilder.lastIndexOf(","), stringBuilder.length() - 1);
+                }
+            }
+
+            stringBuilder.append(EnumEvt.setEnter(EnumEvt.setClose(3), 3));
+
+            /**
+             * @暂降相别
+             */
+            for (int k = 0; k < rect.evt_buf[i].u_min_num; k++) {
+                setEigenVlaue(k, stringBuilder, EnumEvt.QVVR_PHASETYPE.getProperty(), null,
+                        rect.evt_buf[i].qvvr_phasetype[k]);
+
+                if (rect.evt_buf[i].u_min_num - 1 == k) {
+                    stringBuilder.delete(stringBuilder.lastIndexOf(","), stringBuilder.length() - 1);
+                }
+            }
+
+            stringBuilder.append(EnumEvt.setClose(3));
+
+            if (rect.evt_num - 1 == i) {
+                stringBuilder.append(EnumEvt.setClose(2));
+                stringBuilder.append("]" + EnumEvt.ENTER.getProperty());
+            } else {
+                stringBuilder.append(EnumEvt.setEnter(EnumEvt.setClose(2), 2));
+            }
+        }
+
+        stringBuilder.append("}");
+        return stringBuilder.toString();
+    }
+    /**
+     * @特征值处理
+     */
+    public void setEigenVlaue(int len, StringBuilder stringBuilder, String string, Float f, Integer integer) {
+        if (0 == len) {
+            stringBuilder.append(EnumEvt.setEvtProperty(string));
+            stringBuilder.append(EnumEvt.setNewLine() + EnumEvt.setTab(3));
+        }
+
+        stringBuilder.append(EnumEvt.setEvtProperty(Integer.toString(len)));
+
+        if (null == f) {
+            stringBuilder.append(EnumEvt.setEnter(Utils.int2String(integer.intValue()), 4));
+        } else {
+            stringBuilder.append(EnumEvt.setEnter(Utils.float2String(f.floatValue()), 4));
+        }
+    }
 
 }

pqs-advance/advance-boot/src/main/java/com/njcn/advance/event/type/jna/QvvrDLL.java

@@ -52,7 +52,7 @@ public interface QvvrDLL extends Library {
             );
         }
     }
-    
+
     /**
      * 从jar中提取库文件到临时目录
      */
@@ -62,11 +62,13 @@ public interface QvvrDLL extends Library {
         if (libStream == null) {
             throw new FileNotFoundException("在jar中找不到库文件: " + resourcePath);
         }
-        
+
         // 创建临时文件
         String tempDir = System.getProperty("java.io.tmpdir");
-        File tempLibFile = new File(tempDir, "qvvr_" + System.currentTimeMillis() + "_" + libFileName);
+         File tempLibFile = new File(tempDir, libFileName);
-        
+
+        // File tempLibFile = new File(tempDir, "qvvr_" + System.currentTimeMillis() + "_" + libFileName);
+
         // 提取库文件到临时目录
         try (FileOutputStream out = new FileOutputStream(tempLibFile)) {
             byte[] buffer = new byte[8192];
@@ -77,45 +79,47 @@ public interface QvvrDLL extends Library {
         } finally {
             libStream.close();
         }
-        
+
         // 设置为可执行
         tempLibFile.setExecutable(true);
         tempLibFile.setReadable(true);
-        
+
         // JVM退出时删除临时文件
         tempLibFile.deleteOnExit();
-        
+
         System.out.println("已提取库文件到: " + tempLibFile.getAbsolutePath());
         return tempLibFile;
     }
-    
+
     /**
      * 直接调用C DLL的qvvr_fun函数
      * void __stdcall qvvr_fun(void *data)
      */
     void qvvr_fun(QvvrDataStruct data);
-    
+
+    void ping();
+
     /**
      * 对应C语言的qvvr_data_struct结构体
      */
     public static class QvvrDataStruct extends Structure {
-        
+
         // 输入数据
         public float[] smp_va = new float[128 * 50 * 120];   // A相电压
-        public float[] smp_vb = new float[128 * 50 * 120];   // B相电压  
+        public float[] smp_vb = new float[128 * 50 * 120];   // B相电压
         public float[] smp_vc = new float[128 * 50 * 120];   // C相电压
         public int smp_rate;                                 // 采样频率
         public int smp_len;                                  // 数据长度
-        
+
         // 输出结果
         public int evt_num;                                  // 事件数量
         public EventBuffer[] evt_buf = new EventBuffer[32];  // 事件缓冲区
-        
+
         @Override
         protected List<String> getFieldOrder() {
             return Arrays.asList("smp_va", "smp_vb", "smp_vc", "smp_rate", "smp_len", "evt_num", "evt_buf");
         }
-        
+
         public QvvrDataStruct() {
             super();
             // 初始化事件缓冲区
@@ -124,49 +128,49 @@ public interface QvvrDLL extends Library {
             }
         }
     }
-    
+
     /**
      * 事件缓冲区结构
      */
     public static class EventBuffer extends Structure {
         public int[] qvvr_cata_cause = new int[256];
-        public int[] qvvr_phasetype = new int[256]; 
+        public int[] qvvr_phasetype = new int[256];
         public int[] qvvr_cata_type = new int[256];
-        
+
         public float hold_time_rms;
         public float hold_time_dq;
-        
+
         public float POW_a;
         public float POW_b;
         public float POW_c;
-        
+
         public float Voltagechange_Va;
         public float Voltagechange_Vb;
         public float Voltagechange_Vc;
-        
+
         public int SEG_T_num;
         public int[] SEG_T0_idx = new int[256];
         public int[] SEG_T_idx = new int[256];
-        
+
         public int SEG_RMS_T_num;
         public int[] SEG_RMS_T_idx = new int[256];
-        
+
         public int u_min_num;
         public float[] ua_min = new float[256];
-        public float[] ub_min = new float[256]; 
+        public float[] ub_min = new float[256];
         public float[] uc_min = new float[256];
         public float[] u3_min = new float[256];
         public int[] order_min_idx = new int[256];
-        
+
         public float[] angle_diff_ap = new float[256];
         public float[] angle_diff_bp = new float[256];
         public float[] angle_diff_cp = new float[256];
         public float[] angle_diff_an = new float[256];
         public float[] angle_diff_bn = new float[256];
         public float[] angle_diff_cn = new float[256];
-        
+
         public float[] bph_max_value = new float[256];
-        
+
         @Override
         protected List<String> getFieldOrder() {
             return Arrays.asList(

pqs-advance/advance-boot/src/main/java/com/njcn/advance/service/EventWaveAnalysisService.java

@@ -11,4 +11,6 @@ import com.njcn.advance.pojo.dto.waveAnalysis.EntityAdvancedData;
 public interface EventWaveAnalysisService {
 
     EntityAdvancedData analysis(String eventIndex);
+
+    EntityAdvancedData analysisWlEvent(String eventIndex);
 }

pqs-advance/advance-boot/src/main/java/com/njcn/advance/service/assess/impl/SecondaryEvaluationServiceImpl.java

@@ -565,7 +565,7 @@ public class SecondaryEvaluationServiceImpl implements SecondaryEvaluationServic
             unblance.add(evaluationResult);
 
             evaluationResult = new AssessResultVO.EvaluationResult();
-            evaluationResult.setData(result.getApproUnblance().multiply(BigDecimal.valueOf(200)));
+            evaluationResult.setData(result.getApproUnblance());
             evaluationResult.setLimitData(overLimit.getUnblance());
             evaluationResult.setIsQualified(NumberUtil.isLess(evaluationResult.getData(), evaluationResult.getLimitData()));
             unblance.add(evaluationResult);

pqs-advance/advance-boot/src/main/java/com/njcn/advance/service/govern/voltage/impl/SgEventServiceImpl.java

@@ -322,10 +322,7 @@ public class SgEventServiceImpl extends ServiceImpl<SgEventMapper, SgEvent> impl
 
     @Override
     public boolean deleteEventData(List<String> ids) {
-        return this.lambdaUpdate()
+        return this.removeByIds(ids);
-                .set(SgEvent::getState, DataStateEnum.DELETED.getCode())
-                .in(SgEvent::getId, ids)
-                .update();
     }
 
     @Override

pqs-advance/advance-boot/src/main/java/com/njcn/advance/service/govern/voltage/impl/SgMachineServiceImpl.java

@@ -9,8 +9,10 @@ import com.baomidou.mybatisplus.extension.service.impl.ServiceImpl;
 import com.njcn.advance.enums.AdvanceResponseEnum;
 import com.njcn.advance.mapper.govern.voltage.SgMachineMapper;
 import com.njcn.advance.pojo.param.govern.voltage.SgMachineParam;
+import com.njcn.advance.pojo.param.govern.voltage.SgUserParam;
 import com.njcn.advance.pojo.po.govern.voltage.SgMachine;
 import com.njcn.advance.pojo.po.govern.voltage.SgSensitiveUnit;
+import com.njcn.advance.pojo.po.govern.voltage.SgUser;
 import com.njcn.advance.pojo.vo.govern.voltage.SgMachineVO;
 import com.njcn.advance.service.govern.voltage.ISgMachineService;
 import com.njcn.advance.service.govern.voltage.ISgSensitiveUnitService;
@@ -56,12 +58,34 @@ public class SgMachineServiceImpl extends ServiceImpl<SgMachineMapper, SgMachine
     @Override
     public String addMachine(SgMachineParam sgMachineParam) {
         SgMachine sgMachine = new SgMachine();
+        checkMachineName(sgMachineParam, false);
+
         BeanUtil.copyProperties(sgMachineParam, sgMachine);
         //默认为正常状态
         sgMachine.setState(DataStateEnum.ENABLE.getCode());
         this.save(sgMachine);
         return sgMachine.getId();
     }
+    /**
+     * 校验参数，检查是否存在相同名称的业务用户
+     */
+    private void checkMachineName(SgMachineParam sgMachineParam, boolean isExcludeSelf) {
+        LambdaQueryWrapper<SgMachine> sgUserLambdaQueryWrapper = new LambdaQueryWrapper<>();
+        sgUserLambdaQueryWrapper
+                .eq(SgMachine::getName, sgMachineParam.getName())
+                .eq(SgMachine::getState, DataStateEnum.ENABLE.getCode());
+        //更新的时候，需排除当前记录
+        if (isExcludeSelf) {
+            if (sgMachineParam instanceof SgMachineParam.SgMachineUpdateParam) {
+                sgUserLambdaQueryWrapper.ne(SgMachine::getId, ((SgMachineParam.SgMachineUpdateParam) sgMachineParam).getId());
+            }
+        }
+        int countByAccount = this.count(sgUserLambdaQueryWrapper);
+        //大于等于1个则表示重复
+        if (countByAccount >= 1) {
+            throw new BusinessException(AdvanceResponseEnum.SG_USER_NAME_REPEAT);
+        }
+    }
 
     /**
      * 更新设备
@@ -70,6 +94,8 @@ public class SgMachineServiceImpl extends ServiceImpl<SgMachineMapper, SgMachine
     @Override
     public boolean updateSgMachine(SgMachineParam.SgMachineUpdateParam updateParam) {
         SgMachine sgMachine = new SgMachine();
+        checkMachineName(updateParam, true);
+
         BeanUtil.copyProperties(updateParam, sgMachine);
         return this.updateById(sgMachine);
     }

pqs-advance/advance-boot/src/main/java/com/njcn/advance/service/govern/voltage/impl/SgSensitiveUnitServiceImpl.java

@@ -2,12 +2,15 @@ package com.njcn.advance.service.govern.voltage.impl;
 
 import cn.hutool.core.bean.BeanUtil;
 import cn.hutool.core.util.StrUtil;
+import com.baomidou.mybatisplus.core.conditions.query.LambdaQueryWrapper;
 import com.baomidou.mybatisplus.core.conditions.query.QueryWrapper;
 import com.baomidou.mybatisplus.extension.plugins.pagination.Page;
 import com.baomidou.mybatisplus.extension.service.impl.ServiceImpl;
 import com.njcn.advance.enums.AdvanceResponseEnum;
 import com.njcn.advance.mapper.govern.voltage.SgSensitiveUnitMapper;
+import com.njcn.advance.pojo.param.govern.voltage.SgMachineParam;
 import com.njcn.advance.pojo.param.govern.voltage.SgSensitiveUnitParam;
+import com.njcn.advance.pojo.po.govern.voltage.SgMachine;
 import com.njcn.advance.pojo.po.govern.voltage.SgSensitiveUnit;
 import com.njcn.advance.pojo.vo.govern.voltage.SgSensitiveUnitVO;
 import com.njcn.advance.service.govern.voltage.ISgSensitiveUnitService;
@@ -54,12 +57,34 @@ public class SgSensitiveUnitServiceImpl extends ServiceImpl<SgSensitiveUnitMappe
     @Override
     public String addSensitiveUnit(SgSensitiveUnitParam sgSensitiveUnitParam) {
         SgSensitiveUnit sgSensitiveUnit = new SgSensitiveUnit();
+        checkSensitiveUnitName(sgSensitiveUnitParam, false);
+
         BeanUtil.copyProperties(sgSensitiveUnitParam, sgSensitiveUnit);
         //默认为正常状态
         sgSensitiveUnit.setState(DataStateEnum.ENABLE.getCode());
         this.save(sgSensitiveUnit);
         return sgSensitiveUnit.getId();
     }
+    /**
+     * 校验参数，检查是否存在相同名称的业务用户
+     */
+    private void checkSensitiveUnitName(SgSensitiveUnitParam sgSensitiveUnitParam, boolean isExcludeSelf) {
+        LambdaQueryWrapper<SgSensitiveUnit> sgUserLambdaQueryWrapper = new LambdaQueryWrapper<>();
+        sgUserLambdaQueryWrapper
+                .eq(SgSensitiveUnit::getName, sgSensitiveUnitParam.getName())
+                .eq(SgSensitiveUnit::getState, DataStateEnum.ENABLE.getCode());
+        //更新的时候，需排除当前记录
+        if (isExcludeSelf) {
+            if (sgSensitiveUnitParam instanceof SgSensitiveUnitParam.SgSensitiveUnitUpdateParam) {
+                sgUserLambdaQueryWrapper.ne(SgSensitiveUnit::getId, ((SgSensitiveUnitParam.SgSensitiveUnitUpdateParam) sgSensitiveUnitParam).getId());
+            }
+        }
+        int countByAccount = this.count(sgUserLambdaQueryWrapper);
+        //大于等于1个则表示重复
+        if (countByAccount >= 1) {
+            throw new BusinessException(AdvanceResponseEnum.SG_USER_NAME_REPEAT);
+        }
+    }
 
     /**
      * 更新元器件
@@ -69,6 +94,8 @@ public class SgSensitiveUnitServiceImpl extends ServiceImpl<SgSensitiveUnitMappe
     @Override
     public boolean updateSgSensitiveUnit(SgSensitiveUnitParam.SgSensitiveUnitUpdateParam updateParam) {
         SgSensitiveUnit sgSensitiveUnit = new SgSensitiveUnit();
+        checkSensitiveUnitName(updateParam, true);
+
         BeanUtil.copyProperties(updateParam, sgSensitiveUnit);
         return this.updateById(sgSensitiveUnit);
     }

pqs-advance/advance-boot/src/main/java/com/njcn/advance/service/impl/EventRelevantAnalysisServiceImpl.java

@@ -48,9 +48,11 @@ import io.swagger.models.auth.In;
 import lombok.RequiredArgsConstructor;
 import lombok.extern.slf4j.Slf4j;
 import net.sf.json.JSONObject;
+import org.apache.commons.lang.StringUtils;
 import org.springframework.stereotype.Service;
 import org.springframework.transaction.annotation.Transactional;
 
+import java.math.BigDecimal;
 import java.sql.Timestamp;
 import java.time.LocalDateTime;
 import java.time.format.DateTimeFormatter;
@@ -471,6 +473,8 @@ public class EventRelevantAnalysisServiceImpl extends ServiceImpl<RmpEventAdvanc
 
         List<AdvanceEventDetailVO> advanceEventDetailVOList = BeanUtil.copyToList(rmpEventDetailPOList, AdvanceEventDetailVO.class);
         advanceEventDetailVOList = advanceEventDetailVOList.stream().peek(item -> {
+            item.setFeatureAmplitude(roundHalfUp(item.getFeatureAmplitude()*100));
+
             if (map.containsKey(item.getLineId())) {
                 AreaLineInfoVO areaLineInfoVO = map.get(item.getLineId());
                 item.setGdName(areaLineInfoVO.getGdName());
@@ -489,7 +493,17 @@ public class EventRelevantAnalysisServiceImpl extends ServiceImpl<RmpEventAdvanc
 
 
     }
-
+    /**
+     * 四舍五入保留两位小数
+     */
+    private Double roundHalfUp(double num) {
+        if (num == 3.14159) {
+            return num;
+        }
+        BigDecimal b = new BigDecimal(num);
+        //保留2位小数
+        return com.njcn.harmonic.utils.PubUtils.dataLimits(b.setScale(2, BigDecimal.ROUND_HALF_UP).doubleValue());
+    }
     @Override
     public Page<RmpEventDetailAssPO> queryEventsAssPage(BaseParam baseParam) {
         List<LocalDateTime> timeV = PubUtils.checkLocalDate(baseParam.getSearchBeginTime(), baseParam.getSearchEndTime());
@@ -498,7 +512,7 @@ public class EventRelevantAnalysisServiceImpl extends ServiceImpl<RmpEventAdvanc
             lambdaQueryWrapper.like(RmpEventDetailAssPO::getContentDes, baseParam.getSearchValue());
         }
         lambdaQueryWrapper.between(RmpEventDetailAssPO::getTimeId, timeV.get(0), timeV.get(1))
-                .orderByAsc(RmpEventDetailAssPO::getTimeId);
+                .orderByDesc(RmpEventDetailAssPO::getTimeId);
         return rmpEventDetailAssMapper.selectPage(new Page<>(PageFactory.getPageNum(baseParam), PageFactory.getPageSize(baseParam)), lambdaQueryWrapper);
     }
 
@@ -720,7 +734,7 @@ public class EventRelevantAnalysisServiceImpl extends ServiceImpl<RmpEventAdvanc
 
             List<AdvanceEventDetailVO> advanceEventDetailVOLsit = querySagEventsAll(startTime, endTime);
 
-
+            advanceEventDetailVOLsit = advanceEventDetailVOLsit.stream().filter(temp-> StringUtils.isNotEmpty(temp.getAdvanceType())).collect(Collectors.toList());
             for (AdvanceEventDetailVO advanceEventDetailVO : advanceEventDetailVOLsit) { // 获取监测点线路序号
                 //母线id
                 String nodePhysics = advanceEventDetailVO.getVoltageId();
@@ -854,6 +868,21 @@ public class EventRelevantAnalysisServiceImpl extends ServiceImpl<RmpEventAdvanc
     /*************************************************************************************
      * 获取变压器信息并生成矩阵
      *************************************************************************************/
+    public Map<String, Map<String, Integer>>  getNodeBefore(){
+        Map<String, EntityMtrans> entityMtranMap = new HashMap<>(32);
+
+        HandleEvent handleEvent = new HandleEvent();
+        List<EntityLogic> list = relevantLogMapper.getLogic();
+        Map<String, Map<String, Integer>> setNodeSort = new HashMap<>();
+        if (CollectionUtil.isNotEmpty(list)) {
+            Map<String, List<String>> map = getLogicInfo(list);
+            setNodeSort = nodeSort(map);
+        }
+
+        return setNodeSort;
+    }
+
+
     public Map<String, EntityMtrans> getNodeInfo( ) {
         Map<String, EntityMtrans> entityMtranMap = new HashMap<>(32);
 

pqs-advance/advance-boot/src/main/java/com/njcn/advance/service/impl/EventWaveAnalysisServiceImpl.java

@@ -2,13 +2,16 @@ package com.njcn.advance.service.impl;
 
 import cn.hutool.core.date.TimeInterval;
 import cn.hutool.core.io.IoUtil;
+import cn.hutool.core.util.ObjectUtil;
 import cn.hutool.core.util.StrUtil;
 import com.njcn.advance.enums.EnumEvt;
 import com.njcn.advance.mapper.RmpEventAdvanceMapper;
 import com.njcn.advance.pojo.dto.waveAnalysis.*;
-
 import com.njcn.advance.service.EventWaveAnalysisService;
-import com.njcn.advance.utils.*;
+import com.njcn.advance.utils.JnaCallBalance;
+import com.njcn.advance.utils.JnaCallDllOrSo;
+import com.njcn.advance.utils.Utils;
+import com.njcn.advance.utils.WaveUtils;
 import com.njcn.common.pojo.exception.BusinessException;
 import com.njcn.common.utils.PubUtils;
 import com.njcn.device.pq.api.LineFeignClient;
@@ -26,7 +29,10 @@ import net.sf.json.JSONObject;
 import org.springframework.stereotype.Service;
 import org.springframework.transaction.annotation.Transactional;
 
-import java.io.*;
+import java.io.BufferedReader;
+import java.io.IOException;
+import java.io.InputStream;
+import java.io.InputStreamReader;
 import java.nio.charset.StandardCharsets;
 import java.text.ParseException;
 import java.text.SimpleDateFormat;
@@ -81,7 +87,13 @@ public class EventWaveAnalysisServiceImpl implements EventWaveAnalysisService {
                 inputStreamCfg = fileStorageUtil.getFileStream(OssPath.WAVE_DIR + lineDetailDataVO.getIp() + StrUtil.SLASH + rmpEventDetailPO.getWavePath() + GeneralConstant.CFG);
                 inputStreamDat = fileStorageUtil.getFileStream(OssPath.WAVE_DIR + lineDetailDataVO.getIp() + StrUtil.SLASH + rmpEventDetailPO.getWavePath() + GeneralConstant.DAT);
             } catch (Exception e) {
-                throw new BusinessException("暂降cfg,dat文件缺失,请联系管理员");
+                try {
+                    inputStreamCfg = fileStorageUtil.getFileStream(OssPath.WAVE_DIR + lineDetailDataVO.getIp() + StrUtil.SLASH + rmpEventDetailPO.getWavePath() + GeneralConstant.CFG.toLowerCase());
+                    inputStreamDat = fileStorageUtil.getFileStream(OssPath.WAVE_DIR + lineDetailDataVO.getIp() + StrUtil.SLASH + rmpEventDetailPO.getWavePath() + GeneralConstant.DAT.toLowerCase());
+                } catch (Exception e1) {
+
+                    throw new BusinessException("暂降cfg,dat文件缺失,请联系管理员");
+                }
             }
 
             //读取
@@ -164,17 +176,13 @@ public class EventWaveAnalysisServiceImpl implements EventWaveAnalysisService {
             causeStruct.smp_len = pitchList.size();
             causeStruct.smp_rate = (int) wavePitchData.getnOneWaveNum();
 
-
             String hdrStr = waveUtils.getFile(OssPath.WAVE_DIR + lineDetailDataVO.getIp() + StrUtil.SLASH + rmpEventDetailPO.getWavePath() + GeneralConstant.HDR);
             JSONObject jsonObject = JSONObject.fromObject(hdrStr);
             translateData(jsonObject, rmpEventDetailPO.getStartTime(), entityAdvancedData);
 
-
             if (rmpEventDetailPO.getDealFlag() != 1) {
                 //如果存在三个文件但是没有调用dll/so计算
-
                 getDataFromDLL(rmpEventDetailPO, waveOriginalData, rect, entityAdvancedData, causeStruct);
-
             }
 
 
@@ -208,6 +216,171 @@ public class EventWaveAnalysisServiceImpl implements EventWaveAnalysisService {
         return entityAdvancedData;
     }
 
+    @Override
+    public EntityAdvancedData analysisWlEvent(String eventIndex) {
+        TimeInterval timeInterval = new TimeInterval();
+        //调用方法获取暂降事件详情
+        RmpEventDetailPO rmpEventDetailPO = rmpEventAdvanceMapper.selectById(eventIndex);
+        EntityAdvancedData entityAdvancedData;
+
+        if (Objects.isNull(rmpEventDetailPO.getFileFlag())) {
+            throw new BusinessException("系统检测到波形文件未从装置招到本地,请联系管理员");
+        }
+
+        if (rmpEventDetailPO.getFileFlag() == 1) {
+            //获取所有暂态原因
+            List<DictData> dicDataList = dicDataFeignClient.getDicDataByTypeCode(DicDataTypeEnum.EVENT_TYPE.getCode()).getData();
+            Map<Integer, DictData> eventTypeMap = dicDataList.stream().collect(Collectors.toMap(DictData::getAlgoDescribe, Function.identity()));
+            InputStream inputStreamCfg;
+            InputStream inputStreamDat;
+            try {
+                inputStreamCfg = fileStorageUtil.getFileStream(rmpEventDetailPO.getWavePath()+ GeneralConstant.CFG);
+                inputStreamDat = fileStorageUtil.getFileStream(rmpEventDetailPO.getWavePath() + GeneralConstant.DAT);
+            } catch (Exception e) {
+                try {
+                    inputStreamCfg = fileStorageUtil.getFileStream(rmpEventDetailPO.getWavePath() + GeneralConstant.CFG.toLowerCase());
+                    inputStreamDat = fileStorageUtil.getFileStream(rmpEventDetailPO.getWavePath() + GeneralConstant.DAT.toLowerCase());
+                } catch (Exception e1) {
+                    throw new BusinessException("暂降cfg,dat文件缺失,请联系管理员");
+                }
+            }
+
+            //读取
+            BufferedReader bufferedReader;
+            InputStreamReader read = null;
+            String strFileLine;
+            byte[] array = {};
+            List<String> temCfgList = new ArrayList<>();
+            try {
+                // 判断文件是否存在
+                array = IoUtil.readBytes(inputStreamDat);
+                // 考虑到编码格式
+                read = new InputStreamReader(inputStreamCfg, StandardCharsets.UTF_8);
+                bufferedReader = new BufferedReader(read);
+
+                while ((strFileLine = bufferedReader.readLine()) != null) {
+                    temCfgList.add(strFileLine);
+                }
+            } catch (Exception e) {
+                e.printStackTrace();
+            } finally {
+                try {
+                    if (read != null) {
+                        read.close();
+                    }
+                    if (inputStreamDat != null) {
+                        inputStreamDat.close();
+                    }
+                } catch (IOException e) {
+                    e.printStackTrace();
+                }
+            }
+
+            //原始波形
+            WaveData waveOriginalData = getWavedata(rmpEventDetailPO, temCfgList, array, 3);
+            List<List<Float>> originalList = waveOriginalData.getSunData();
+
+            entityAdvancedData = new EntityAdvancedData(originalList.size());
+
+            for (int i = 0; i < originalList.size(); i++) {
+                //坐标轴
+                entityAdvancedData.smp_x[i] = originalList.get(i).get(0);
+                entityAdvancedData.smp_a[i] = originalList.get(i).get(1);
+                entityAdvancedData.smp_b[i] = originalList.get(i).get(2);
+                entityAdvancedData.smp_c[i] = originalList.get(i).get(3);
+            }
+            entityAdvancedData.smp_len = originalList.size();
+
+            //抽点方法计算波形
+            WaveData wavePitchData = getWavedata(rmpEventDetailPO, temCfgList, array, 0);
+            List<List<Float>> pitchList = wavePitchData.getSunData();
+
+            // 将获取到的数据填充到结构体内
+            Rect rect = new Rect();
+            CauseStruct causeStruct = new CauseStruct();
+
+            for (int i = 0; i < pitchList.size(); i++) {
+                rect.smp_va[i] = pitchList.get(i).get(1);
+                causeStruct.smp_va[i] = pitchList.get(i).get(1);
+
+                rect.smp_vb[i] = pitchList.get(i).get(2);
+                causeStruct.smp_vb[i] = pitchList.get(i).get(2);
+
+                rect.smp_vc[i] = pitchList.get(i).get(3);
+                causeStruct.smp_vc[i] = pitchList.get(i).get(3);
+            }
+
+            rect.smp_len = pitchList.size();
+
+            //超过60s的波形直接抛异常给上面处理
+            /*
+             * 波形最大值计算
+             */
+            int MAX_LENGTH = 128 * 3000;
+            if (rect.smp_len >= MAX_LENGTH) {
+                throw new BusinessException("波形超过60S");
+            }
+
+            rect.smp_rate = (int) wavePitchData.getnOneWaveNum();
+            causeStruct.smp_len = pitchList.size();
+            causeStruct.smp_rate = (int) wavePitchData.getnOneWaveNum();
+
+            if (rmpEventDetailPO.getDealFlag() != 1) {
+                //如果存在三个文件但是没有调用dll/so计算
+                getDataFromDLL(rmpEventDetailPO, waveOriginalData, rect, entityAdvancedData, causeStruct);
+            } else {
+                //已经处理过了，那就根据id获取暂降原因
+                String reason = rmpEventDetailPO.getAdvanceReason();
+                List<DictData> reasonList = dicDataFeignClient.getDicDataByTypeCode(DicDataTypeEnum.EVENT_REASON.getCode()).getData();
+                Map<String, DictData> eventReasonMap = reasonList.stream().collect(Collectors.toMap(DictData::getId, Function.identity()));
+                if (ObjectUtil.isNotNull(eventReasonMap.get(reason))) {
+                    entityAdvancedData.sagReason[0] = eventReasonMap.get(reason).getName();
+                }
+            }
+
+            String hdrStr = null;
+            try {
+                hdrStr = waveUtils.getFile(rmpEventDetailPO.getWavePath() + GeneralConstant.HDR.toLowerCase());
+            } catch (Exception e) {
+                log.error("读取文件服务器波形数据异常：{}",e.getMessage());
+            }
+            if (hdrStr != null) {
+                JSONObject jsonObject = JSONObject.fromObject(hdrStr);
+                translateData(jsonObject, rmpEventDetailPO.getStartTime(), entityAdvancedData);
+            }
+
+//            if (rmpEventDetailPO.getDealFlag() != 1) {
+//                //如果存在三个文件但是没有调用dll/so计算
+//                getDataFromDLL(rmpEventDetailPO, waveOriginalData, rect, entityAdvancedData, causeStruct);
+//            }
+
+            /****************************************************************
+             * 根据返回的结果计算，获取暂降类型描述
+             ****************************************************************/
+            if (entityAdvancedData.backNumber > 0) {
+                for (int i = 0; i < entityAdvancedData.backNumber; i++) {
+                    entityAdvancedData.sagType[i] = eventTypeMap.get(entityAdvancedData.evt_buf[i].qvvr_cata_type[0]).getName();
+                    switch (entityAdvancedData.evt_buf[i].qvvr_phasetype[0]) {
+                        case 1:
+                            entityAdvancedData.sagPhaseType[i] = "单相";
+                            break;
+                        case 2:
+                            entityAdvancedData.sagPhaseType[i] = "两相";
+                            break;
+                        case 3:
+                            entityAdvancedData.sagPhaseType[i] = "三相";
+                            break;
+                        default:
+                            break;
+                    }
+                }
+            }
+        } else {
+            throw new BusinessException("暂降cfg,dat文件缺失,请联系管理员");
+        }
+        log.info("高级算法波形计算" + timeInterval.interval());
+        return entityAdvancedData;
+    }
 
     /**
      * 事件未进行高级算法处理：系统调用dll处理并保存结果
@@ -352,7 +525,7 @@ public class EventWaveAnalysisServiceImpl implements EventWaveAnalysisService {
         if (StrUtil.isBlank(rmpEventDetailPOQuery.getAdvanceReason())) {
 
             //暂降原因计算
-            JnaCallDllOrSo jnaCallDllReason = new JnaCallBalance("qvvr_dll_cause");
+            JnaCallDllOrSo jnaCallDllReason = new JnaCallBalance("qvvr_cause_dll");
             jnaCallDllReason.setPath();
 
             JnaCallBalance.Balancelibrary CAUSE = JnaCallBalance.Balancelibrary.INSTANTCE;

pqs-advance/advance-boot/src/main/java/com/njcn/advance/utils/JnaCallDllOrSo.java

@@ -1,11 +1,11 @@
 package com.njcn.advance.utils;
 
-import cn.hutool.core.io.resource.ClassPathResource;
 import lombok.extern.slf4j.Slf4j;
-import org.apache.commons.io.FileUtils;
 
-import java.io.*;
+import java.io.File;
-import java.net.URLDecoder;
+import java.io.FileNotFoundException;
+import java.io.FileOutputStream;
+import java.io.InputStream;
 
 /**
  * pqs
@@ -20,21 +20,20 @@ public class JnaCallDllOrSo {
 
     public JnaCallDllOrSo(String name) {
         super();
-        String suffix = ".dll";
         try {
             String os = System.getProperty("os.name");
-            // windows操作系统为1 否则为0
             int beginIndex = os != null && os.startsWith("Windows") ? 1 : 0;
             String nameDll;
             if (beginIndex == 0) {
-                //linux操作系统
+                nameDll = "lib" + name + ".so";
-                nameDll = "lib" + name + "_dll";
-                suffix = ".so";
             } else {
                 nameDll = name;
+                if (!name.endsWith(".dll")) {
+                    nameDll = name + ".dll";
+                }
             }
 
-            String tem = "/usr/local/dllFile/"+ nameDll.concat(suffix);
+            String tem = "/usr/local/dllFile/"+ nameDll;
             File dockerFile = new File(tem);
             if(!dockerFile.exists()){
                 boolean f = dockerFile.getParentFile().mkdirs();
@@ -42,7 +41,11 @@ public class JnaCallDllOrSo {
                 System.out.println("文件夹创建："+f);
                 System.out.println("文件创建："+d);
 
-                try (InputStream inputStream = getClass().getClassLoader().getResourceAsStream(nameDll.concat(suffix))) {
+                try (InputStream inputStream = getClass().getClassLoader().getResourceAsStream(nameDll)) {
+                    if (inputStream == null) {
+                        log.error("找不到资源文件: {}", nameDll);
+                        throw new FileNotFoundException("找不到资源文件: " + nameDll);
+                    }
                     try (FileOutputStream outputStream = new FileOutputStream(dockerFile)) {
                         byte[] buffer = new byte[1024];
                         int bytesRead;
@@ -53,9 +56,11 @@ public class JnaCallDllOrSo {
                 }
             }
             this.path = dockerFile.getAbsolutePath();
+            System.out.println("动态库路径: " + this.path);
         } catch (Exception e) {
             log.error("调用高级算法文件异常，异常信息如下：");
-            log.error(e.getMessage());
+            log.error(e.getMessage(), e);
+            throw new RuntimeException("加载动态库失败: " + e.getMessage(), e);
         }
 
 

pqs-advance/advance-boot/src/main/resources/bootstrap-jb.yml

@@ -0,0 +1,56 @@
+#当前服务的基本信息
+microservice:
+  ename: @artifactId@
+  name: '@name@'
+  version: @version@
+  sentinel:
+    url: @sentinel.url@
+  gateway:
+    url: @gateway.url@
+server:
+  port: 10211
+#feign接口开启服务熔断降级处理
+feign:
+  sentinel:
+    enabled: true
+spring:
+  application:
+    name: @artifactId@
+  #nacos注册中心以及配置中心的指定
+  cloud:
+    nacos:
+      discovery:
+        server-addr: @nacos.url@
+        namespace: @nacos.namespace@
+      config:
+        username: @nacos.username@
+        password: @nacos.password@
+        server-addr: @nacos.url@
+        namespace: @nacos.namespace@
+        file-extension: yaml
+        shared-configs:
+          - data-id: share-config.yaml
+            refresh: true
+          - data-id: share-config-datasource-db.yaml
+            refresh: true
+  servlet:
+    multipart:
+      max-file-size: 100MB
+      max-request-size: 100MB
+  main:
+    allow-bean-definition-overriding: true
+
+
+
+#项目日志的配置
+logging:
+  config: http://@nacos.url@/nacos/v1/cs/configs?tenant=@nacos.namespace@&group=DEFAULT_GROUP&dataId=logback.xml
+  level:
+    root: info
+
+#mybatis配置信息
+mybatis-plus:
+  #别名扫描
+  type-aliases-package: com.njcn.advance.pojo
+
+

pqs-advance/advance-boot/src/main/resources/bootstrap-sjzx.yml

@@ -0,0 +1,61 @@
+#当前服务的基本信息
+microservice:
+  ename: @artifactId@
+  name: '@name@'
+  version: @version@
+  sentinel:
+    url: @sentinel.url@
+  gateway:
+    url: @gateway.url@
+server:
+  port: 10211
+#feign接口开启服务熔断降级处理
+feign:
+  sentinel:
+    enabled: true
+spring:
+  application:
+    name: @artifactId@
+  #nacos注册中心以及配置中心的指定
+  cloud:
+    nacos:
+      discovery:
+        ip: @service.server.url@
+        server-addr: @nacos.url@
+        username: @nacos.username@
+        password: @nacos.password@
+        namespace: @nacos.namespace@
+      config:
+        server-addr: @nacos.url@
+        username: @nacos.username@
+        password: @nacos.password@
+        namespace: @nacos.namespace@
+        file-extension: yaml
+        shared-configs:
+          - data-id: share-config.yaml
+            refresh: true
+          - data-id: share-config-datasource-db.yaml
+            refresh: true
+  servlet:
+    multipart:
+      max-file-size: 100MB
+      max-request-size: 100MB
+  main:
+    allow-bean-definition-overriding: true
+
+
+
+#项目日志的配置
+logging:
+  #config: http://@nacos.url@/nacos/v1/cs/configs?tenant=@nacos.namespace@&group=DEFAULT_GROUP&dataId=logback.xml
+  level:
+    root: info
+
+#mybatis配置信息
+mybatis-plus:
+  #别名扫描
+  type-aliases-package: com.njcn.advance.pojo
+
+
+mqtt:
+  client-id: @artifactId@${random.value}

pqs-advance/advance-boot/src/main/resources/bootstrap.yml

@@ -1,57 +1,3 @@
-#当前服务的基本信息
-microservice:
-  ename: @artifactId@
-  name: '@name@'
-  version: @version@
-  sentinel:
-    url: @sentinel.url@
-  gateway:
-    url: @gateway.url@
-server:
-  port: 10211
-#feign接口开启服务熔断降级处理
-feign:
-  sentinel:
-    enabled: true
 spring:
-  application:
+  profiles:
-    name: @artifactId@
+    active: sjzx
-  #nacos注册中心以及配置中心的指定
-  cloud:
-    nacos:
-      discovery:
-        ip: @service.server.url@
-        server-addr: @nacos.url@
-        namespace: @nacos.namespace@
-      config:
-        server-addr: @nacos.url@
-        namespace: @nacos.namespace@
-        file-extension: yaml
-        shared-configs:
-          - data-id: share-config.yaml
-            refresh: true
-          - data-Id: share-config-datasource-db.yaml
-            refresh: true
-  servlet:
-    multipart:
-      max-file-size: 100MB
-      max-request-size: 100MB
-  main:
-    allow-bean-definition-overriding: true
-
-
-
-#项目日志的配置
-logging:
-  config: http://@nacos.url@/nacos/v1/cs/configs?tenant=@nacos.namespace@&group=DEFAULT_GROUP&dataId=logback.xml
-  level:
-    root: info
-
-#mybatis配置信息
-mybatis-plus:
-  #别名扫描
-  type-aliases-package: com.njcn.advance.pojo
-
-
-mqtt:
-  client-id: @artifactId@${random.value}

pqs-auth/src/main/resources/bootstrap-jb.yml

@@ -0,0 +1,52 @@
+#当前服务的基本信息
+microservice:
+  ename: @artifactId@
+  name: '@name@'
+  version: @version@
+  sentinel:
+    url: @sentinel.url@
+  gateway:
+    url: @gateway.url@
+server:
+  port: 10214
+#feign接口开启服务熔断降级处理
+feign:
+  sentinel:
+    enabled: true
+
+spring:
+  application:
+    name: @artifactId@
+  #nacos注册中心以及配置中心的指定
+  cloud:
+    nacos:
+      discovery:
+        server-addr: @nacos.url@
+        namespace: @nacos.namespace@
+      config:
+        username: @nacos.username@
+        password: @nacos.password@
+        server-addr: @nacos.url@
+        namespace: @nacos.namespace@
+        file-extension: yaml
+        shared-configs:
+          - data-id: share-config.yaml
+            refresh: true
+          - data-id: share-config-datasource-db.yaml
+            refresh: true
+  main:
+    allow-bean-definition-overriding: true
+
+
+#项目日志的配置
+logging:
+  config: http://@nacos.url@/nacos/v1/cs/configs?tenant=@nacos.namespace@&group=DEFAULT_GROUP&dataId=logback.xml
+  level:
+    root: info
+
+
+#mybatis配置信息
+mybatis-plus:
+  #别名扫描
+  type-aliases-package: com.njcn.user.pojo
+

pqs-auth/src/main/resources/bootstrap-sjzx.yml

@@ -0,0 +1,57 @@
+#当前服务的基本信息
+microservice:
+  ename: @artifactId@
+  name: '@name@'
+  version: @version@
+  sentinel:
+    url: @sentinel.url@
+  gateway:
+    url: @gateway.url@
+server:
+  port: 10214
+#feign接口开启服务熔断降级处理
+feign:
+  sentinel:
+    enabled: true
+
+spring:
+  application:
+    name: @artifactId@
+  #nacos注册中心以及配置中心的指定
+  cloud:
+    nacos:
+      discovery:
+        ip: @service.server.url@
+        server-addr: @nacos.url@
+        username: @nacos.username@
+        password: @nacos.password@
+        namespace: @nacos.namespace@
+      config:
+        server-addr: @nacos.url@
+        username: @nacos.username@
+        password: @nacos.password@
+        namespace: @nacos.namespace@
+        file-extension: yaml
+        shared-configs:
+          - data-id: share-config.yaml
+            refresh: true
+          - data-id: share-config-datasource-db.yaml
+            refresh: true
+  main:
+    allow-bean-definition-overriding: true
+
+
+#项目日志的配置
+logging:
+  #config: http://@nacos.url@/nacos/v1/cs/configs?tenant=@nacos.namespace@&group=DEFAULT_GROUP&dataId=logback.xml
+  level:
+    root: info
+
+
+#mybatis配置信息
+mybatis-plus:
+  #别名扫描
+  type-aliases-package: com.njcn.user.pojo
+
+mqtt:
+  client-id: @artifactId@${random.value}

pqs-auth/src/main/resources/bootstrap.yml

@@ -1,53 +1,3 @@
-#当前服务的基本信息
-microservice:
-  ename: @artifactId@
-  name: '@name@'
-  version: @version@
-  sentinel:
-    url: @sentinel.url@
-  gateway:
-    url: @gateway.url@
-server:
-  port: 10214
-#feign接口开启服务熔断降级处理
-feign:
-  sentinel:
-    enabled: true
-
 spring:
-  application:
+  profiles:
-    name: @artifactId@
+    active: @spring.profiles.active@
-  #nacos注册中心以及配置中心的指定
-  cloud:
-    nacos:
-      discovery:
-        ip: @service.server.url@
-        server-addr: @nacos.url@
-        namespace: @nacos.namespace@
-      config:
-        server-addr: @nacos.url@
-        namespace: @nacos.namespace@
-        file-extension: yaml
-        shared-configs:
-          - data-id: share-config.yaml
-            refresh: true
-          - data-Id: share-config-datasource-db.yaml
-            refresh: true
-  main:
-    allow-bean-definition-overriding: true
-
-
-#项目日志的配置
-logging:
-  config: http://@nacos.url@/nacos/v1/cs/configs?tenant=@nacos.namespace@&group=DEFAULT_GROUP&dataId=logback.xml
-  level:
-    root: info
-
-
-#mybatis配置信息
-mybatis-plus:
-  #别名扫描
-  type-aliases-package: com.njcn.user.pojo
-
-mqtt:
-  client-id: @artifactId@${random.value}

pqs-bpm/bpm-api/src/main/java/com/njcn/bpm/pojo/param/BpmSignParam.java

@@ -88,7 +88,7 @@ public class BpmSignParam extends BaseEntity implements Serializable {
         private String name;
 
         @ApiModelProperty("标识key")
-        private String key;
+        private String signKey;
 
     }
 

pqs-bpm/bpm-boot/src/main/java/com/njcn/bpm/BpmApplication.java

@@ -14,7 +14,6 @@ import org.springframework.context.annotation.DependsOn;
  * @date 2022/11/10
  */
 @Slf4j
-@DependsOn("proxyMapperRegister")
 @MapperScan("com.njcn.**.mapper")
 @EnableFeignClients(basePackages = "com.njcn")
 @SpringBootApplication(scanBasePackages = "com.njcn")

pqs-bpm/bpm-boot/src/main/java/com/njcn/bpm/service/impl/BpmCategoryServiceImpl.java

@@ -67,8 +67,8 @@ public class BpmCategoryServiceImpl extends ServiceImpl<BpmCategoryMapper, BpmCa
     @Override
     public Page<BpmCategoryVO> getCategoryPage(BpmCategoryParam.BpmCategoryQueryParam bpmCategoryQueryParam) {
         QueryWrapper<BpmCategoryVO> categoryVOQueryWrapper = new QueryWrapper<>();
-        if (StrUtil.isNotBlank(bpmCategoryQueryParam.getName())) {
+        if (StrUtil.isNotBlank(bpmCategoryQueryParam.getSearchValue())) {
-            categoryVOQueryWrapper.like("bpm_category.name", bpmCategoryQueryParam.getName());
+            categoryVOQueryWrapper.like("bpm_category.name", bpmCategoryQueryParam.getSearchValue());
         }
 
         if (StrUtil.isNotBlank(bpmCategoryQueryParam.getCode())) {

pqs-bpm/bpm-boot/src/main/java/com/njcn/bpm/service/impl/BpmSignServiceImpl.java

@@ -106,8 +106,8 @@ public class BpmSignServiceImpl extends ServiceImpl<BpmSignMapper, BpmSign> impl
             bpmSignVOQueryWrapper.like("bpm_sign.name", bpmSignQueryParam.getName());
         }
 
-        if (StrUtil.isNotBlank(bpmSignQueryParam.getKey())) {
+        if (StrUtil.isNotBlank(bpmSignQueryParam.getSignKey())) {
-            bpmSignVOQueryWrapper.like("bpm_sign.signKey", bpmSignQueryParam.getKey());
+            bpmSignVOQueryWrapper.like("bpm_sign.sign_key", bpmSignQueryParam.getSignKey());
         }
         bpmSignVOQueryWrapper.eq("bpm_sign.state", DataStateEnum.ENABLE.getCode());
         bpmSignVOQueryWrapper.orderByAsc("bpm_sign.sort");

pqs-bpm/bpm-boot/src/main/resources/bootstrap-jb.yml

@@ -0,0 +1,71 @@
+#当前服务的基本信息
+microservice:
+  ename: @artifactId@
+  name: '@name@'
+  version: @version@
+  sentinel:
+    url: @sentinel.url@
+  gateway:
+    url: @gateway.url@
+server:
+  port: 10321
+#feign接口开启服务熔断降级处理
+feign:
+  sentinel:
+    enabled: true
+spring:
+  application:
+    name: @artifactId@
+  jackson:
+    date-format: yyyy-MM-dd HH:mm:ss
+    time-zone: Asia/Shanghai
+  #nacos注册中心以及配置中心的指定
+  cloud:
+    nacos:
+      discovery:
+        server-addr: @nacos.url@
+        namespace: @nacos.namespace@
+      config:
+        username: @nacos.username@
+        password: @nacos.password@
+        server-addr: @nacos.url@
+        namespace: @nacos.namespace@
+        file-extension: yaml
+        shared-configs:
+          - data-id: share-config.yaml
+            refresh: true
+          - data-id: share-config-datasource-db.yaml
+            refresh: true
+  main:
+    allow-bean-definition-overriding: true
+  servlet:
+    multipart:
+      max-file-size: 100MB
+      max-request-size: 100MB
+
+flowable:
+  database-schema-update: false
+  db-history-used: true # flowable6 默认 true 生成信息表，无需手动设置
+  check-process-definitions: false # 设置为 false，禁用 /resources/processes 自动部署 BPMN XML 流程
+  history-level: full # full：保存历史数据的最高级别，可保存全部流程相关细节，包括流程流转各节点参数
+  async-executor-activate: false
+
+#项目日志的配置
+logging:
+  config: http://@nacos.url@/nacos/v1/cs/configs?tenant=@nacos.namespace@&group=DEFAULT_GROUP&dataId=logback.xml
+  level:
+    root: info
+
+
+#mybatis配置信息
+mybatis-plus:
+  type-aliases-package: com.njcn.bpm.pojo
+
+gw:
+  url: dwzyywzt-pms3-proxy.com
+  code: 13B9B47F1E483324E05338297A0A0595
+
+
+
+
+

pqs-bpm/bpm-boot/src/main/resources/bootstrap-sjzx.yml

@@ -0,0 +1,76 @@
+#当前服务的基本信息
+microservice:
+  ename: @artifactId@
+  name: '@name@'
+  version: @version@
+  sentinel:
+    url: @sentinel.url@
+  gateway:
+    url: @gateway.url@
+server:
+  port: 10321
+#feign接口开启服务熔断降级处理
+feign:
+  sentinel:
+    enabled: true
+spring:
+  application:
+    name: @artifactId@
+  jackson:
+    date-format: yyyy-MM-dd HH:mm:ss
+    time-zone: Asia/Shanghai
+  #nacos注册中心以及配置中心的指定
+  cloud:
+    nacos:
+      discovery:
+        ip: @service.server.url@
+        server-addr: @nacos.url@
+        username: @nacos.username@
+        password: @nacos.password@
+        namespace: @nacos.namespace@
+      config:
+        server-addr: @nacos.url@
+        namespace: @nacos.namespace@
+        username: @nacos.username@
+        password: @nacos.password@
+        file-extension: yaml
+        shared-configs:
+          - data-id: share-config.yaml
+            refresh: true
+          - data-id: bpm-config.yaml
+            refresh: true
+  main:
+    allow-bean-definition-overriding: true
+  servlet:
+    multipart:
+      max-file-size: 100MB
+      max-request-size: 100MB
+
+flowable:
+  database-schema-update: false
+  db-history-used: true # flowable6 默认 true 生成信息表，无需手动设置
+  check-process-definitions: false # 设置为 false，禁用 /resources/processes 自动部署 BPMN XML 流程
+  history-level: full # full：保存历史数据的最高级别，可保存全部流程相关细节，包括流程流转各节点参数
+  async-executor-activate: false
+
+#项目日志的配置
+logging:
+  #config: http://@nacos.url@/nacos/v1/cs/configs?tenant=@nacos.namespace@&group=DEFAULT_GROUP&dataId=logback.xml
+  level:
+    root: info
+
+
+#mybatis配置信息
+mybatis-plus:
+  type-aliases-package: com.njcn.bpm.pojo
+
+gw:
+  url: dwzyywzt-pms3-proxy.com
+  code: 13B9B47F1E483324E05338297A0A0595
+
+mqtt:
+  client-id: @artifactId@${random.value}
+
+
+
+

pqs-bpm/bpm-boot/src/main/resources/bootstrap.yml

@@ -1,72 +1,3 @@
-#当前服务的基本信息
-microservice:
-  ename: @artifactId@
-  name: '@name@'
-  version: @version@
-  sentinel:
-    url: @sentinel.url@
-  gateway:
-    url: @gateway.url@
-server:
-  port: 10321
-#feign接口开启服务熔断降级处理
-feign:
-  sentinel:
-    enabled: true
 spring:
-  application:
+  profiles:
-    name: @artifactId@
+    active: @spring.profiles.active@
-  jackson:
-    date-format: yyyy-MM-dd HH:mm:ss
-    time-zone: Asia/Shanghai
-  #nacos注册中心以及配置中心的指定
-  cloud:
-    nacos:
-      discovery:
-        ip: @service.server.url@
-        server-addr: @nacos.url@
-        namespace: @nacos.namespace@
-      config:
-        server-addr: @nacos.url@
-        namespace: @nacos.namespace@
-        file-extension: yaml
-        shared-configs:
-          - data-id: share-config.yaml
-            refresh: true
-          - data-Id: bpm-config.yaml
-            refresh: true
-  main:
-    allow-bean-definition-overriding: true
-  servlet:
-    multipart:
-      max-file-size: 100MB
-      max-request-size: 100MB
-
-flowable:
-  database-schema-update: false
-  db-history-used: true # flowable6 默认 true 生成信息表，无需手动设置
-  check-process-definitions: false # 设置为 false，禁用 /resources/processes 自动部署 BPMN XML 流程
-  history-level: full # full：保存历史数据的最高级别，可保存全部流程相关细节，包括流程流转各节点参数
-  async-executor-activate: false
-
-#项目日志的配置
-logging:
-  config: http://@nacos.url@/nacos/v1/cs/configs?tenant=@nacos.namespace@&group=DEFAULT_GROUP&dataId=logback.xml
-  level:
-    root: info
-
-
-#mybatis配置信息
-mybatis-plus:
-  type-aliases-package: com.njcn.bpm.pojo
-
-gw:
-  url: dwzyywzt-pms3-proxy.com
-  code: 13B9B47F1E483324E05338297A0A0595
-
-mqtt:
-  client-id: @artifactId@${random.value}
-
-
-
-

pqs-common/common-core/pom.xml

@@ -97,11 +97,11 @@
             <groupId>com.fasterxml.jackson.datatype</groupId>
             <artifactId>jackson-datatype-jsr310</artifactId>
         </dependency>
-        <!--mqtt相关依赖-->
+<!--        &lt;!&ndash;mqtt相关依赖&ndash;&gt;-->
-        <dependency>
+<!--        <dependency>-->
-            <groupId>com.github.tocrhz</groupId>
+<!--            <groupId>com.github.tocrhz</groupId>-->
-            <artifactId>mqtt-spring-boot-starter</artifactId>
+<!--            <artifactId>mqtt-spring-boot-starter</artifactId>-->
-        </dependency>
+<!--        </dependency>-->
 
 <!--        <dependency>-->
 <!--            <groupId>org.springframework.boot</groupId>-->

pqs-common/common-core/src/main/java/com/njcn/common/pojo/constant/PatternRegex.java

@@ -75,9 +75,9 @@ public interface PatternRegex {
     String ROLE_REGEX = "^[a-zA-Z][a-zA-Z0-9]{2,50}$";
 
     /**
-     * 部门名称由汉字组成，长度为0-20
+     * 部门名称由汉字组成，长度为0-32 （前端统一32了这边改下长度）
      */
-    String DEPT_NAME_REGEX = "^[\\u4e00-\\u9fa5]{1,20}$";
+    String DEPT_NAME_REGEX = "^[\\u4e00-\\u9fa5]{1,32}$";
 
     /**
      * 字典名称包括中文、数字、字母、罗马数字、括号以及点号
@@ -258,7 +258,7 @@ public interface PatternRegex {
     /**
      * 任意字符，长度在1-20位，常用于名称、编码等常规录入
      */
-    String ALL_CHAR_1_20 = "^[-_A-Za-z0-9\\u4e00-\\u9fa5]{1,20}$";
+    String ALL_CHAR_1_20 = "^[-_A-Za-z0-9\\u4e00-\\u9fa5]{1,32}$";
 
     String SPECIALCHARACTER ="[<>%'%;()&+/\\\\-\\\\\\\\_|@*?#$!,.]|html";
 

pqs-common/common-core/src/main/java/com/njcn/common/pojo/dto/SimpleDTO.java

@@ -25,6 +25,12 @@ public class SimpleDTO implements Serializable {
     @ApiModelProperty(name = "value", value = "数值")
     private String value;
 
+    /**
+     * 针对云南曲靖特殊处理的五层树标识符
+     * 特殊在不显示供电公司，显示（变电站、线路）这两个是部门的名称+母线_监测点的名称
+     */
+    private String deptName;
+
     private Integer sort;
 
     private Integer algoDescribe;

pqs-common/common-core/src/main/java/com/njcn/common/utils/PubUtils.java

@@ -15,6 +15,7 @@ import com.njcn.common.pojo.exception.BusinessException;
 import lombok.Data;
 
 import java.io.IOException;
+import java.lang.reflect.InvocationTargetException;
 import java.lang.reflect.Method;
 import java.lang.reflect.Type;
 import java.math.BigDecimal;
@@ -32,6 +33,7 @@ import java.util.*;
 import java.util.concurrent.TimeUnit;
 import java.util.regex.Matcher;
 import java.util.regex.Pattern;
+import java.util.stream.Collectors;
 
 import static java.lang.Integer.parseInt;
 
@@ -281,6 +283,30 @@ public class PubUtils {
         }
     }
 
+    /**
+     * 用于获取对象中，前缀一样，后缀为2~50的属性值
+     *
+     * @param methodPrefix 方法前缀
+     * @param number       方法后缀
+     * @return 对象属性值
+     */
+    public static Double getValueByMethodDouble(List data ,Class clazz, String methodPrefix, Integer number) {
+        try {
+            Method method = clazz.getMethod(methodPrefix + number);
+            OptionalDouble average = data.stream().mapToDouble(temp -> {
+                try {
+                    return (Double) method.invoke(temp);
+                } catch (Exception e) {
+                    throw new BusinessException(CommonResponseEnum.REFLECT_METHOD_EXCEPTION);
+                }
+            }).average();
+            return average.orElse(0.0);
+
+        } catch (Exception e) {
+            throw new BusinessException(CommonResponseEnum.REFLECT_METHOD_EXCEPTION);
+        }
+    }
+
 
     public static List<String> getStartTimeEndTime(String beginDate, String endDate) throws Exception {
 

pqs-common/common-db/pom.xml

@@ -57,6 +57,11 @@
             <groupId>mysql</groupId>
             <artifactId>mysql-connector-java</artifactId>
         </dependency>
+        <!--vastbase驱动用postgresql-->
+        <dependency>
+            <groupId>org.postgresql</groupId>
+            <artifactId>postgresql</artifactId>
+        </dependency>
         <!--达梦驱动-->
         <dependency>
             <groupId>com.dameng</groupId>
@@ -69,6 +74,12 @@
             <artifactId>mybatis-plus-boot-starter</artifactId>
         </dependency>
 
+        <dependency>
+            <groupId>com.baomidou</groupId>
+            <artifactId>dynamic-datasource-spring-boot-starter</artifactId>
+            <version>3.5.1</version>
+        </dependency>
+
         <!--数据库相关********end-->
     </dependencies>
 

pqs-common/common-echarts/src/main/java/com/njcn/echarts/json/PieGenerator.java

@@ -33,6 +33,8 @@ public class PieGenerator {
         Option reasonOption = new Option();
         //取消渲染动画
         reasonOption.setAnimation(false);
+        String[] colorArr = {"#526ADE", "#00BFF5","#FFBF00","#77DA63","#D5FF6B"};
+        reasonOption.setColor(colorArr);
         //背景色
         reasonOption.setBackgroundColor(PicCommonData.PIC_BACK_COLOR);
         //标题

pqs-common/common-echarts/src/main/java/com/njcn/echarts/util/BusinessDataUtil.java

@@ -25,7 +25,7 @@ public class BusinessDataUtil {
         List<List<Double>> unTolerateData = new ArrayList<>();
         for (List<Double> list : originData) {
             //是否超过上限
-            if (list.get(0) <= 0.03) {
+            if (list.get(0) <= 0.003) {
                 int line = 230 - 30000 * list.get(0).intValue();
                 if (list.get(1) > line) {
                     unTolerateData.add(list);

pqs-common/common-echarts/src/main/java/com/njcn/echarts/util/DrawPicUtil.java

@@ -57,8 +57,8 @@ public class DrawPicUtil {
 
 
     /***
-     * 绘制波形图
      * @author hongawen
+     * 绘制波形图
      * @date 2023/6/21 11:01
      * @return String base64数据
      */

pqs-common/common-event/src/main/java/com/njcn/event/file/component/WaveFileComponent.java

@@ -3,11 +3,9 @@ package com.njcn.event.file.component;
 import cn.hutool.core.date.DatePattern;
 import cn.hutool.core.date.DateUtil;
 import cn.hutool.core.io.IoUtil;
-import cn.hutool.core.text.StrPool;
 import cn.hutool.core.util.ArrayUtil;
 import cn.hutool.core.util.CharsetUtil;
 import cn.hutool.core.util.StrUtil;
-import com.njcn.common.pojo.enums.response.CommonResponseEnum;
 import com.njcn.common.pojo.exception.BusinessException;
 import com.njcn.common.utils.wave.BitConverter;
 import com.njcn.event.file.pojo.dto.*;
@@ -16,11 +14,13 @@ import lombok.RequiredArgsConstructor;
 import lombok.extern.slf4j.Slf4j;
 import org.springframework.stereotype.Component;
 
+import java.awt.*;
 import java.io.*;
 import java.nio.file.Files;
 import java.text.DateFormat;
 import java.text.SimpleDateFormat;
 import java.util.*;
+import java.util.List;
 
 /**
  * @author hongawen
@@ -81,6 +81,46 @@ public class WaveFileComponent {
         return waveDataDTO;
     }
 
+    public WaveDataDTO getComtradeNoAddPoints(InputStream cfgStream, InputStream datStream, int iType) {
+        WaveDataDTO waveDataDTO = new WaveDataDTO();
+        // 首先判断文件路径是否为空
+        // 读取cfg文件
+        ComtradeCfgDTO comtradeCfgDTO = getComtradeCfgNoAddPoints(cfgStream);
+        // 为空或者未找到结束符号
+        if (comtradeCfgDTO == null || !"BINARY".equalsIgnoreCase(comtradeCfgDTO.getStrBinType())) {
+            throw new BusinessException(WaveFileResponseEnum.CFG_DATA_ERROR);
+        }
+
+        /*****根据通道号计算相别**  add by yexb -----Start****
+         * 1、判断是否是3的倍数，是3的倍数则是3相
+         * 2、假如不是3的倍数 ，是1的倍数则是单相
+         ********************************************************/
+        if (comtradeCfgDTO.getNAnalogNum() % 3 == 0) {
+            comtradeCfgDTO.setNPhasic(3);
+        } else {
+            comtradeCfgDTO.setNPhasic(1);
+        }
+
+        // 给相别数量赋值
+        waveDataDTO.setIPhasic(comtradeCfgDTO.getNPhasic());
+
+        // 组装解析抬头
+        getWaveTitle(waveDataDTO, comtradeCfgDTO);
+
+        // 解析.dat文件
+        List<List<Float>> listWaveData = getComtradeDatNoAddPoints(comtradeCfgDTO, datStream, iType);
+
+        waveDataDTO.setComtradeCfgDTO(comtradeCfgDTO);
+
+        waveDataDTO.setListWaveData(listWaveData);
+
+        //add by hongawen,将暂态触发起始时间记录下来
+        waveDataDTO.setTime(DateUtil.format(comtradeCfgDTO.getTimeTrige(), DatePattern.NORM_DATETIME_MS_PATTERN));
+        /*****根据通道号计算相别**  add by yexb -----end****/
+
+        return waveDataDTO;
+    }
+
     /*********************************
      * 根据波形数据算出rms值数据
      * param waveDataDTO 瞬时波形（包含了CFG配置文件）
@@ -472,6 +512,127 @@ public class WaveFileComponent {
         return comtradeCfgDTO;
     }
 
+    private ComtradeCfgDTO getComtradeCfgNoAddPoints(InputStream cfgStream) {
+        ComtradeCfgDTO comtradeCfgDTO = new ComtradeCfgDTO();
+        try (InputStreamReader read = new InputStreamReader(cfgStream, CharsetUtil.CHARSET_GBK); BufferedReader bufferedReader = new BufferedReader(read);) {
+            // 第一行不关心仅仅是一些描述类的信息
+            String strFileLine = bufferedReader.readLine();
+
+            // 第二行需要关心第二个(模拟量的个数)和第三个参数(开关量的个数)
+            strFileLine = bufferedReader.readLine();
+            // 按“,”进行分割
+            String[] strTempArray = strFileLine.split(StrUtil.COMMA);
+            // 总个数
+            comtradeCfgDTO.setNChannelNum(Integer.parseInt(strTempArray[0]));
+            // 模拟量的个数
+            comtradeCfgDTO.setNAnalogNum(Integer.parseInt(strTempArray[1].substring(0, strTempArray[1].length() - 1)));
+            // 开关量的个数
+            comtradeCfgDTO.setNDigitalNum(Integer.parseInt(strTempArray[2].substring(0, strTempArray[2].length() - 1)));
+
+            // 从第三行开始的ComtradeCfg.nChannelNum行是模拟量通道和数字量通道
+            List<AnalogDTO> lstAnalogDTO = new ArrayList<>();
+            comtradeCfgDTO.setLstAnalogDTO(lstAnalogDTO);
+            for (int i = 0; i < comtradeCfgDTO.getNChannelNum(); i++) {
+                AnalogDTO analogDTO = new AnalogDTO();
+                lstAnalogDTO.add(analogDTO);
+                strFileLine = bufferedReader.readLine();
+                strTempArray = strFileLine.split(StrUtil.COMMA);
+                //通道序号
+                analogDTO.setNIndex(Integer.parseInt(strTempArray[0]));
+                // 通道名称
+                analogDTO.setSzChannleName(strTempArray[1]);
+                // 相位名称
+                analogDTO.setSzPhasicName(strTempArray[2]);
+                // 监视的通道名称
+                analogDTO.setSzMonitoredChannleName(strTempArray[3]);
+                // 通道的单位
+                analogDTO.setSzUnitName(strTempArray[4]);
+                // 通道的系数
+                analogDTO.setFCoefficent(Float.parseFloat(strTempArray[5]));
+                // 通道的偏移量
+                analogDTO.setFOffset(Float.parseFloat(strTempArray[6]));
+                // 起始采样时间的偏移量
+                analogDTO.setFTimeOffset(Float.parseFloat(strTempArray[7]));
+                // 采样值的最小值
+                analogDTO.setNMin(Integer.parseInt(strTempArray[8]));
+                // 采样值的最大值
+                analogDTO.setNMax(Integer.parseInt(strTempArray[9]));
+                // 一次变比
+                analogDTO.setFPrimary(Float.parseFloat(strTempArray[10]));
+                // 二次变比
+                analogDTO.setFSecondary(Float.parseFloat(strTempArray[11]));
+                // 一次值还是二次值标志
+                analogDTO.setSzValueType(strTempArray[12]);
+            }
+
+            //WW 2019-11-14 // 采样频率
+            String freqLine = bufferedReader.readLine();
+            int nFreq;
+            try {
+                // 先尝试解析为double再四舍五入为整数，以兼容"50.00"这样的格式
+                nFreq = (int) Math.round(Double.parseDouble(freqLine));
+            } catch (NumberFormatException e) {
+                // 如果失败则使用原来的整数解析方式
+                nFreq = Integer.parseInt(freqLine);
+            }
+
+            // 获取采样段数
+            strFileLine = bufferedReader.readLine();
+            int nRates = Integer.parseInt(strFileLine);
+            comtradeCfgDTO.setNRates(nRates);
+            // 获得每段的采样率 //采样率
+            List<RateDTO> lstRate = new ArrayList<>();
+            int nOffset = 0;
+            for (int i = 0; i < nRates; i++) {
+                strFileLine = bufferedReader.readLine();
+                strTempArray = strFileLine.split(StrUtil.COMMA);
+                RateDTO rateDTO = new RateDTO();
+                // 单周波采样点数 //WW 2019-11-14
+                double doubleValue = Double.parseDouble(strTempArray[0]); // 解析为 double
+                int result = (int) (doubleValue / nFreq); // 强制转换为 int
+                rateDTO.setNOneSample(result);
+                // 总点数 //这里的strTemp是一个偏移量
+                rateDTO.setNSampleNum((Integer.parseInt(strTempArray[1]) - nOffset));
+                nOffset = rateDTO.getNSampleNum();
+                lstRate.add(rateDTO);
+            }
+            comtradeCfgDTO.setLstRate(lstRate);
+            // 增加读取波形起始时间个结束时间
+            String timeFormat = "dd/MM/yyyy,HH:mm:ss.SSS";
+            // 波形起始时间
+            strFileLine = bufferedReader.readLine();
+            strFileLine = strFileLine.substring(0, strFileLine.length() - 3);
+            comtradeCfgDTO.setTimeStart(DateUtil.parse(strFileLine, timeFormat));
+
+            // 暂态触发时间
+            strFileLine = bufferedReader.readLine();
+            strFileLine = strFileLine.substring(0, strFileLine.length() - 3);
+            comtradeCfgDTO.setTimeTrige(DateUtil.parse(strFileLine, timeFormat));
+
+            // 获取触发时间的时间 + 毫秒
+            Calendar calendar = DateUtil.calendar(comtradeCfgDTO.getTimeTrige());
+            comtradeCfgDTO.setFirstMs(calendar.get(Calendar.MILLISECOND));
+            comtradeCfgDTO.setFirstTime(calendar.getTime());
+
+
+            long a = comtradeCfgDTO.getTimeStart().getTime();
+            long b = comtradeCfgDTO.getTimeTrige().getTime();
+
+            int c = (int) (b - a);
+            if (c >= 90 && c <= 110) {
+                comtradeCfgDTO.setNPush(100);
+            } else if (c >= 190 && c <= 210) {
+                comtradeCfgDTO.setNPush(200);
+            }
+            // 赋值编码格式（二进制）
+            comtradeCfgDTO.setStrBinType(bufferedReader.readLine().toUpperCase());
+        } catch (Exception e) {
+            // 解析.cfg文件出错
+            comtradeCfgDTO = null;
+        }
+        return comtradeCfgDTO;
+    }
+
     /*********************************
      * 读取dat方法
      * param strFilePath  .dat访问路径
@@ -511,13 +672,14 @@ public class WaveFileComponent {
                 //抽点后新的的采样率
                 List<RateDTO> newLstRate = new ArrayList<>();
                 for (int iRate = 0; iRate < comtradeCfgDTO.getNRates(); iRate++) {
-//                    if (comtradeCfgDTO.getLstRate().get(iRate).getNOneSample() >= 32) {
                     // 计算本段录波总共有多少波形
                     nWaveNum = comtradeCfgDTO.getLstRate().get(iRate).getNSampleNum() / comtradeCfgDTO.getLstRate().get(iRate).getNOneSample();
                     //设置总波形大小
                     comtradeCfgDTO.setNAllWaveNum(comtradeCfgDTO.getNAllWaveNum() + nWaveNum);
                     // 将最低采样率替换到本段录波内
                     RateDTO tmpRateDTO = new RateDTO();
+                    // C# 原实现中 bool 默认是 false，16~31 点/周波段也应按普通抽点处理
+                    tmpRateDTO.bRMSFlag = false;
                     // 有效值标志,如果是有效值，那么就需要反向补点，而不是抽点
                     if (comtradeCfgDTO.getLstRate().get(iRate).getNOneSample() >= 32) {
                         //YXB 2025-08-27
@@ -547,12 +709,299 @@ public class WaveFileComponent {
                         newLstRate.get(nnInd).setNSampleNum(comtradeCfgDTO.getLstRate().get(iRate).getNOneSample() * nWaveNum);
                     }
 
+                    nnInd++;
+                }
+                // 偏移量,采样间隔
+                long nOffSet = 0, nWaveSpan;
+                //两个点之间的时间差
+                float fValue, dfValue;
+                // 计算不同块的采样率
+                int nIndex = 0;
+                // .CFG中采样率
+                RateDTO tmpRateDTO;
+                // nBlockNum 总循环次数
+                for (int i = 0; i < nBlockNum; i++) {
+                    tmpRateDTO = comtradeCfgDTO.getLstRate().get(nIndex);
+                    // 判断是否进入下一段
+                    if (i == tmpRateDTO.getNSampleNum() + nOffSet) {
+                        nOffSet += tmpRateDTO.getNSampleNum();
+                        nIndex++;
+                        if (nIndex == nnInd) {
+                            break;
+                        }
+                    }
+                    tmpRateDTO = comtradeCfgDTO.getLstRate().get(nIndex);
+                    dfValue = (float) 20 / tmpRateDTO.getNOneSample();
+                    // C# 原实现中 RMS 段与普通抽点是两条独立控制流，不能挂在同一个取模条件下
+                    if (Boolean.TRUE.equals(newLstRate.get(nIndex).bRMSFlag)) {
+                        //计算本段补点采样间隔
+                        nWaveSpan = newLstRate.get(nIndex).getNOneSample() / tmpRateDTO.getNOneSample();
+                        // 计算有多少个周波
+                        long allWaveTemp = newLstRate.get(nIndex).getNSampleNum() / newLstRate.get(nIndex).getNOneSample();
+                        // 本段需要补多少点
+                        long allempSample = newLstRate.get(nIndex).getNOneSample();
+                        int segmentEndIndex = (int) (nOffSet + tmpRateDTO.getNSampleNum() - 1);
+                        for (int iWaveTemp = 0; iWaveTemp < allWaveTemp; iWaveTemp++) {
+                            for (int mTempSample = 0; mTempSample < allempSample; mTempSample++) {
+                                // 2 点/周波时，半周波位置需要切换到该周波的第二个原始采样点
+                                if (mTempSample / nWaveSpan == 1 && mTempSample % nWaveSpan == 0) {
+                                    i++;
+                                }
+                                //存储局部数据集合，包含了时间，A，B，C三相
+                                List<Float> tmpWaveData = new ArrayList<>();
+                                for (int j = 0; j < comtradeCfgDTO.getNAnalogNum(); j++) {
+                                    if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzPhasicName().equalsIgnoreCase("N")) {
+                                        break;
+                                    }
+                                    float fCoef = comtradeCfgDTO.getLstAnalogDTO().get(j).getFCoefficent();
+                                    fValue = BitConverter.byte2ToUnsignedShort(datArray, i * nBlockSize + 2 * 4 + j * 2) * fCoef;
+                                    //WW 2019-11-14
+                                    /*************************
+                                     * 1、接口返回的默认是二次值
+                                     * 2、P是一次值 S是二次值
+                                     * 3、S(二次值）情况下：
+                                     *     ①、单位为"V"时候则直接等于；
+                                     *     ②、单位为"kV"时候需要乘以1000
+                                     * 4、P(一次值）情况下：
+                                     *     ①、单位为"V"时候则直接等于；
+                                     *     ②、单位为"kV"时候需要乘以1000
+                                     *************************/
+                                    //P是一次值 S是二次值
+                                    if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzValueType().equalsIgnoreCase("S")) {
+                                        //判断单位是V还是kV
+                                        if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzUnitName().equalsIgnoreCase("KV")) {
+                                            fValue = fValue * 1000.0f;
+                                        } else {
+                                            fValue = fValue;
+                                        }
+                                    }
+                                    //P是一次值 S是二次值
+                                    else if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzValueType().equalsIgnoreCase("P")) {
+                                        //判断单位是V还是kV
+                                        if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzUnitName().equalsIgnoreCase("V")) {
+                                            //根据cfg内的变比，将一次值转换成二次值
+                                            if (comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary() != 0.0f) {
+                                                fValue = fValue * comtradeCfgDTO.getLstAnalogDTO().get(j).getFSecondary() / comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary();
+                                            } else {
+                                                fValue = fValue;
+                                            }
+                                        }
+                                        //判断单位是V还是kV
+                                        else if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzUnitName().equalsIgnoreCase("KV")) {
+                                            //根据cfg内的变比，将一次值转换成二次值
+                                            if (comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary() != 0.0f) {
+                                                fValue = fValue * 1000.0f * comtradeCfgDTO.getLstAnalogDTO().get(j).getFSecondary() / comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary();
+                                            } else {
+                                                fValue = fValue;
+                                            }
+                                        } else //还有可能是  电流，单位是A
+                                        {
+                                            //根据cfg内的变比，将一次值转换成二次值
+                                            if (comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary() != 0.0f) {
+                                                fValue = fValue * comtradeCfgDTO.getLstAnalogDTO().get(j).getFSecondary() / comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary();
+                                            } else {
+                                                fValue = fValue;
+                                            }
+                                        }
+                                    }
+
+                                    //xValue前移量，假如是第一次时候则需要前移
+                                    if (!blxValue && j == 0) {
+                                        xValueAll = (float) (i * 20) / tmpRateDTO.getNOneSample() - comtradeCfgDTO.getNPush();
+                                        blxValue = true;
+                                        //只增加一个xValue的值 //增加时间值
+                                        tmpWaveData.add((float) (Math.round(xValueAll * 100)) / 100);
+                                    } else if (j == 0) {
+                                        xValueAll += (float) dfValue / nWaveSpan;
+                                        //只增加一个xValue的值 //增加时间值
+                                        tmpWaveData.add((float) (Math.round(xValueAll * 100)) / 100);
+                                    }
+
+                                    //不同通道yValue的值都需要增加，最终成ABC三相 //每个通道的值
+                                    tmpWaveData.add((float) (Math.round(fValue * 100)) / 100);
+                                }
+                                //把每个单独的值赋予到整体里面去
+                                listWaveData.add(tmpWaveData);
+                            }
+                            // 本周波处理完成后，推进到下一周波的原始采样点
+                            if (iWaveTemp < (allWaveTemp - 1)) {
+                                i++;
+                            }
+                        }
+                        // 某些文件的段点数并不是原始每周波点数的整倍数。
+                        // RMS 段处理完成后，强制把原始游标对齐到当前段末尾，
+                        // 这样外层 for 的下一次自增才能稳定落到下一段起点，避免重复进入同一 RMS 段。
+                        i = segmentEndIndex;
+                        continue;
+                    }
+
+                    // 计算本段抽点采样间隔
+                    nWaveSpan = tmpRateDTO.getNOneSample() / newLstRate.get(nIndex).getNOneSample();
+                    // 判断是否到了需要抽的采样点
+                    if (i % nWaveSpan == 0) {
+                        // 计算每个通道的值
+                        //存储局部数据集合，包含了时间，A，B，C三相
+                        List<Float> tmpWaveData = new ArrayList<>();
+                        for (int j = 0; j < comtradeCfgDTO.getNAnalogNum(); j++) {
+                            //数据只有电压ABC三相数据，不展示U0、I0等数据 YXB2020-10-09 去除相别为N相的数据
+                            if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzPhasicName().equalsIgnoreCase("N")) {
+                                break;
+                            }
+
+                            float fCoef = comtradeCfgDTO.getLstAnalogDTO().get(j).getFCoefficent();
+                            fValue = BitConverter.byte2ToUnsignedShort(datArray, i * nBlockSize + 2 * 4 + j * 2) * fCoef;
+
+                            //WW 2019-11-14
+                            /**************************
+                             * 1、接口返回的默认是二次值
+                             * 2、P是一次值 S是二次值
+                             * 3、S(二次值）情况下：
+                             *     ①、单位为"V"时候则直接等于；
+                             *     ②、单位为"kV"时候需要乘以1000
+                             * 4、P(一次值）情况下：
+                             *     ①、单位为"V"时候则直接等于；
+                             *     ②、单位为"kV"时候需要乘以1000
+                             **************************/
+                            //P是一次值 S是二次值
+                            if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzValueType().equalsIgnoreCase("S")) {
+                                //判断单位是V还是kV
+                                if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzUnitName().equalsIgnoreCase("KV")) {
+                                    fValue = fValue * 1000.0f;
+                                } else {
+                                    fValue = fValue;
+                                }
+                            }
+                            //P是一次值 S是二次值
+                            else if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzValueType().equalsIgnoreCase("P")) {
+                                //判断单位是V还是kV
+                                if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzUnitName().equalsIgnoreCase("V")) {
+                                    //根据cfg内的变比，将一次值转换成二次值
+                                    if (comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary() != 0.0f) {
+                                        fValue = fValue * comtradeCfgDTO.getLstAnalogDTO().get(j).getFSecondary() / comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary();
+                                    } else {
+                                        fValue = fValue;
+                                    }
+                                }
+                                //判断单位是V还是kV
+                                else if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzUnitName().equalsIgnoreCase("KV")) {
+                                    //根据cfg内的变比，将一次值转换成二次值
+                                    if (comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary() != 0.0f) {
+                                        fValue = fValue * 1000.0f * comtradeCfgDTO.getLstAnalogDTO().get(j).getFSecondary() / comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary();
+                                    } else {
+                                        fValue = fValue;
+                                    }
+                                } else //还有可能是  电流，单位是A
+                                {
+                                    //根据cfg内的变比，将一次值转换成二次值
+                                    if (comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary() != 0.0f) {
+                                        fValue = fValue * comtradeCfgDTO.getLstAnalogDTO().get(j).getFSecondary() / comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary();
+                                    } else {
+                                        fValue = fValue;
+                                    }
+                                }
+                            }
+                            //xValue前移量，假如是第一次时候则需要前移
+                            if (!blxValue && j == 0) {
+                                xValueAll = (float) (i * 20) / tmpRateDTO.getNOneSample() - comtradeCfgDTO.getNPush();
+                                blxValue = true;
+                                //只增加一个xValue的值 //增加时间值
+                                tmpWaveData.add((float) (Math.round(xValueAll * 100)) / 100);
+                            } else if (j == 0) {
+                                xValueAll += (float) nWaveSpan * dfValue;
+                                //只增加一个xValue的值 //增加时间值
+                                tmpWaveData.add((float) (Math.round(xValueAll * 100)) / 100);
+                            }
+
+                            //不同通道yValue的值都需要增加，最终成ABC三相 //每个通道的值
+                            tmpWaveData.add((float) (Math.round(fValue * 100)) / 100);
+                        }
+                        //把每个单独的值赋予到整体里面去
+                        listWaveData.add(tmpWaveData);
+                    }
+                }
+            }
+        } catch (Exception e) {
+            e.printStackTrace();
+            throw new BusinessException(WaveFileResponseEnum.DAT_DATA_ERROR);
+        }
+
+        return listWaveData;
+    }
+
+    private List<List<Float>> getComtradeDatNoAddPoints(ComtradeCfgDTO comtradeCfgDTO, InputStream datStream, int iType) {
+        //返回数据，如果仅仅做展示后期考虑换String类型，降低内存开销
+        List<List<Float>> listWaveData = new ArrayList<>();
+        //初始化xValue的值
+        float xValueAll = 0;
+        //判断是否首次登陆
+        boolean blxValue = false;
+        byte[] datArray;
+        try {
+            datArray = IoUtil.readBytes(datStream);
+            if (ArrayUtil.isEmpty(datArray)) {
+                throw new BusinessException(WaveFileResponseEnum.DAT_DATA_ERROR);
+            }
+            // 计算每个单独的数据块的大小 4个字节的序号 4个字节的时间 2个字节的值
+            // 示例中的排布是 4个字节的序号 4个字节的时间 UA(2字节) UB(2字节) UC(2字节) IA(2字节) IB(2字节) IC(2字节)
+            int nDigSize = (comtradeCfgDTO.getNDigitalNum() % 16) > 0 ? (comtradeCfgDTO.getNDigitalNum() / 16 + 1) * 2 : comtradeCfgDTO.getNDigitalNum() / 16 * 2;
+            int nBlockSize = 2 * Integer.SIZE / 8 + comtradeCfgDTO.getNAnalogNum() * 2 + nDigSize;
+            // 总长度除以每个块的大小
+            int nBlockNum = (int)Math.floor(datArray.length / nBlockSize);
+
+            // 获取采样率
+            int finalSampleRate = getFinalWaveSample(comtradeCfgDTO.getLstRate(), iType);
+            if (finalSampleRate != -1) {
+                //设置最终采样率
+                comtradeCfgDTO.setFinalSampleRate(finalSampleRate);
+                // 计算转换后的采样率
+                int nnInd = 0;
+                // 抽点后总共多少点数据
+                int nWaveNum;
+                //抽点后新的的采样率
+                List<RateDTO> newLstRate = new ArrayList<>();
+                for (int iRate = 0; iRate < comtradeCfgDTO.getNRates(); iRate++) {
+                    if (comtradeCfgDTO.getLstRate().get(iRate).getNOneSample() >= 32) {
+                    // 计算本段录波总共有多少波形
+                    nWaveNum = comtradeCfgDTO.getLstRate().get(iRate).getNSampleNum() / comtradeCfgDTO.getLstRate().get(iRate).getNOneSample();
+                    //设置总波形大小
+                    comtradeCfgDTO.setNAllWaveNum(comtradeCfgDTO.getNAllWaveNum() + nWaveNum);
+                    // 将最低采样率替换到本段录波内
+                    RateDTO tmpRateDTO = new RateDTO();
+                    // 有效值标志,如果是有效值，那么就需要反向补点，而不是抽点
+//                    if (comtradeCfgDTO.getLstRate().get(iRate).getNOneSample() >= 32) {
+//                        //YXB 2025-08-27
+//                        tmpRateDTO.bRMSFlag = false;
+//                    }
+//                    //如果采样是全波有效值或者半波有效值，需要去补足周波点数 YXB 2025-08-27
+//                    else if (comtradeCfgDTO.getLstRate().get(iRate).getNOneSample() <= 2) {
+//                        //YXB 2025-08-27
+//                        tmpRateDTO.bRMSFlag = true;
+//                    }
+                    newLstRate.add(tmpRateDTO);
+                    //iFlag =3 一定不进行抽点算法
+                    if (iType != 3) {
+                        //true 抽点算法（当前采样率跟统一采样率不一样则是抽点，否则是未抽点）
+                        if (!Objects.equals(comtradeCfgDTO.getLstRate().get(iRate).getNOneSample(), comtradeCfgDTO.getFinalSampleRate())) {
+                            newLstRate.get(nnInd).setNOneSample(comtradeCfgDTO.getFinalSampleRate());
+                            // 计算本段录波按照最低采样点应该有多少录波
+                            newLstRate.get(nnInd).setNSampleNum(comtradeCfgDTO.getFinalSampleRate() * nWaveNum);
+                        } else {
+                            newLstRate.get(nnInd).setNOneSample(comtradeCfgDTO.getLstRate().get(iRate).getNOneSample());
+                            // 计算本段录波按照最低采样点应该有多少录波
+                            newLstRate.get(nnInd).setNSampleNum(comtradeCfgDTO.getLstRate().get(iRate).getNOneSample() * nWaveNum);
+                        }
+                    } else {
+                        newLstRate.get(nnInd).setNOneSample(comtradeCfgDTO.getLstRate().get(iRate).getNOneSample());
+                        // 计算本段录波按照最低采样点应该有多少录波
+                        newLstRate.get(nnInd).setNSampleNum(comtradeCfgDTO.getLstRate().get(iRate).getNOneSample() * nWaveNum);
+                    }
+
                     // 正常的配置中采样率
-                   /* comtradeCfgDTO.getLstRate().get(nnInd).setNOneSample(comtradeCfgDTO.getLstRate().get(iRate).getNOneSample());
+                    comtradeCfgDTO.getLstRate().get(nnInd).setNOneSample(comtradeCfgDTO.getLstRate().get(iRate).getNOneSample());
-                    comtradeCfgDTO.getLstRate().get(nnInd).setNSampleNum(comtradeCfgDTO.getLstRate().get(iRate).getNSampleNum());*/
+                    comtradeCfgDTO.getLstRate().get(nnInd).setNSampleNum(comtradeCfgDTO.getLstRate().get(iRate).getNSampleNum());
 
                     nnInd++;
-//                    }
+                    }
                 }
                 // 偏移量,采样间隔
                 long nOffSet = 0, nWaveSpan;
@@ -574,15 +1023,16 @@ public class WaveFileComponent {
                             break;
                         }
                     }
-                    tmpRateDTO = comtradeCfgDTO.getLstRate().get(nIndex);
+                    nWaveSpan = tmpRateDTO.getNOneSample() / newLstRate.get(nIndex).getNOneSample();
-                    //YXB 2025-08-27 如果是有效值，那么需要去补点，而不是抽点
+//                    tmpRateDTO = comtradeCfgDTO.getLstRate().get(nIndex);
-                    if (newLstRate.get(nIndex).bRMSFlag == true) {
+//                    //YXB 2025-08-27 如果是有效值，那么需要去补点，而不是抽点
-                        //计算本段补点采样间隔
+//                    if (newLstRate.get(nIndex).bRMSFlag == true) {
-                        nWaveSpan = newLstRate.get(nIndex).getNOneSample() / tmpRateDTO.getNOneSample();
+//                        //计算本段补点采样间隔
-                    } else {
+//                        nWaveSpan = newLstRate.get(nIndex).getNOneSample() / tmpRateDTO.getNOneSample();
-                        // 计算本段抽点采样间隔
+//                    } else {
-                        nWaveSpan = tmpRateDTO.getNOneSample() / newLstRate.get(nIndex).getNOneSample();
+//                        // 计算本段抽点采样间隔
-                    }
+//                        nWaveSpan = tmpRateDTO.getNOneSample() / newLstRate.get(nIndex).getNOneSample();
+//                    }
 
                     dfValue = (float) 20 / tmpRateDTO.getNOneSample();
                     // 判断是否到了需要抽的采样点
@@ -590,182 +1040,82 @@ public class WaveFileComponent {
                         // 计算每个通道的值
                         //存储局部数据集合，包含了时间，A，B，C三相
                         List<Float> tmpWaveData = new ArrayList<>();
-                        //YXB 2025-08-27 如果是有效值，那么需要去补点，而不是抽点
+                        for (int j = 0; j < comtradeCfgDTO.getNAnalogNum(); j++) {
-                        if (newLstRate.get(nIndex).bRMSFlag == true) {
+                            //数据只有电压ABC三相数据，不展示U0、I0等数据 YXB2020-10-09 去除相别为N相的数据
-                            // 计算有多少个周波
+                            if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzPhasicName().equalsIgnoreCase("N")) {
-                            long allWaveTemp = newLstRate.get(nIndex).getNSampleNum() / newLstRate.get(nIndex).getNOneSample();
+                                break;
-                            // 本段需要补多少点
+                            }
-                            long allempSample = newLstRate.get(nIndex).getNOneSample();
-                            //int iStartWaveTemp = i ;// 开始补点的起点
-                            for (int iWaveTemp = 0; iWaveTemp < allWaveTemp; iWaveTemp++) {
-                                for (int mTempSample = 0; mTempSample < allempSample; mTempSample++) {
-                                    //最多只有半波有效值，也就是每周波是1个或者2个点，然后去补最少16个点
-                                    if (mTempSample / nWaveSpan == 1 && mTempSample % nWaveSpan == 0) {
-                                        i++;
-                                    }
-                                    //存储局部数据集合，包含了时间，A，B，C三相
-                                    tmpWaveData = new ArrayList<>();
-                                    for (int j = 0; j < comtradeCfgDTO.getNAnalogNum(); j++) {
-                                        //数据只有电压ABC三相数据，不展示U0、I0等数据 YXB2020-10-09 去除相别为N相的数据
-                                        if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzPhasicName().equalsIgnoreCase("N")) {
-                                            break;
-                                        }
-                                        float fCoef = comtradeCfgDTO.getLstAnalogDTO().get(j).getFCoefficent();
 
-                                        if((i * nBlockSize + 2 * 4 + j * 2) == 2437568){
+                            float fCoef = comtradeCfgDTO.getLstAnalogDTO().get(j).getFCoefficent();
-                                            System.out.println(55);
+                            fValue = BitConverter.byte2ToUnsignedShort(datArray, i * nBlockSize + 2 * 4 + j * 2) * fCoef;
-                                        }
-                                        fValue = BitConverter.byte2ToUnsignedShort(datArray, i * nBlockSize + 2 * 4 + j * 2) * fCoef;
-                                        //WW 2019-11-14
-                                        /*************************
-                                         * 1、接口返回的默认是二次值
-                                         * 2、P是一次值 S是二次值
-                                         * 3、S(二次值）情况下：
-                                         *     ①、单位为"V"时候则直接等于；
-                                         *     ②、单位为"kV"时候需要乘以1000
-                                         * 4、P(一次值）情况下：
-                                         *     ①、单位为"V"时候则直接等于；
-                                         *     ②、单位为"kV"时候需要乘以1000
-                                         *************************/
-                                        //P是一次值 S是二次值
-                                        if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzValueType().equalsIgnoreCase("S")) {
-                                            //判断单位是V还是kV
-                                            if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzUnitName().equalsIgnoreCase("KV")) {
-                                                fValue = fValue * 1000.0f;
-                                            } else {
-                                                fValue = fValue;
-                                            }
-                                        }
-                                        //P是一次值 S是二次值
-                                        else if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzValueType().equalsIgnoreCase("P")) {
-                                            //判断单位是V还是kV
-                                            if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzUnitName().equalsIgnoreCase("V")) {
-                                                //根据cfg内的变比，将一次值转换成二次值
-                                                if (comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary() != 0.0f) {
-                                                    fValue = fValue * comtradeCfgDTO.getLstAnalogDTO().get(j).getFSecondary() / comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary();
-                                                } else {
-                                                    fValue = fValue;
-                                                }
-                                            }
-                                            //判断单位是V还是kV
-                                            else if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzUnitName().equalsIgnoreCase("KV")) {
-                                                //根据cfg内的变比，将一次值转换成二次值
-                                                if (comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary() != 0.0f) {
-                                                    fValue = fValue * 1000.0f * comtradeCfgDTO.getLstAnalogDTO().get(j).getFSecondary() / comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary();
-                                                } else {
-                                                    fValue = fValue;
-                                                }
-                                            } else //还有可能是  电流，单位是A
-                                            {
-                                                //根据cfg内的变比，将一次值转换成二次值
-                                                if (comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary() != 0.0f) {
-                                                    fValue = comtradeCfgDTO.getLstAnalogDTO().get(j).getFSecondary() / comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary();
-                                                } else {
-                                                    fValue = fValue;
-                                                }
-                                            }
-                                        }
 
-                                        //xValue前移量，假如是第一次时候则需要前移
+                            //WW 2019-11-14
-                                        if (!blxValue && j == 0) {
+                            /**************************
-                                            xValueAll = (float) (i * 20) / tmpRateDTO.getNOneSample() - comtradeCfgDTO.getNPush();
+                             * 1、接口返回的默认是二次值
-                                            blxValue = true;
+                             * 2、P是一次值 S是二次值
-                                            //只增加一个xValue的值 //增加时间值
+                             * 3、S(二次值）情况下：
-                                            tmpWaveData.add((float) (Math.round(xValueAll * 100)) / 100);
+                             *     ①、单位为"V"时候则直接等于；
-                                        } else if (j == 0) {
+                             *     ②、单位为"kV"时候需要乘以1000
-                                            xValueAll += (float) dfValue / nWaveSpan;
+                             * 4、P(一次值）情况下：
-                                            //只增加一个xValue的值 //增加时间值
+                             *     ①、单位为"V"时候则直接等于；
-                                            tmpWaveData.add((float) (Math.round(xValueAll * 100)) / 100);
+                             *     ②、单位为"kV"时候需要乘以1000
-                                        }
+                             **************************/
-
+                            //P是一次值 S是二次值
-                                        //不同通道yValue的值都需要增加，最终成ABC三相 //每个通道的值
+                            if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzValueType().equalsIgnoreCase("S")) {
-                                        tmpWaveData.add((float) (Math.round(fValue * 100)) / 100);
+                                //判断单位是V还是kV
-                                    }
+                                if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzUnitName().equalsIgnoreCase("KV")) {
-                                    //把每个单独的值赋予到整体里面去
+                                    fValue = fValue * 1000.0f;
-                                    listWaveData.add(tmpWaveData);
+                                } else {
-                                }
+                                    fValue = fValue;
-                                // 把每个单独的值赋予到整体里面去
-                                if (iWaveTemp < (allWaveTemp - 1)) {
-                                    i++;
                                 }
                             }
-                        } else {
+                            //P是一次值 S是二次值
-                            for (int j = 0; j < comtradeCfgDTO.getNAnalogNum(); j++) {
+                            else if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzValueType().equalsIgnoreCase("P")) {
-                                //数据只有电压ABC三相数据，不展示U0、I0等数据 YXB2020-10-09 去除相别为N相的数据
+                                //判断单位是V还是kV
-                                if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzPhasicName().equalsIgnoreCase("N")) {
+                                if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzUnitName().equalsIgnoreCase("V")) {
-                                    break;
+                                    //根据cfg内的变比，将一次值转换成二次值
-                                }
+                                    if (comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary() != 0.0f) {
-
+                                        fValue = fValue * comtradeCfgDTO.getLstAnalogDTO().get(j).getFSecondary() / comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary();
-                                float fCoef = comtradeCfgDTO.getLstAnalogDTO().get(j).getFCoefficent();
-                                fValue = BitConverter.byte2ToUnsignedShort(datArray, i * nBlockSize + 2 * 4 + j * 2) * fCoef;
-
-                                //WW 2019-11-14
-                                /**************************
-                                 * 1、接口返回的默认是二次值
-                                 * 2、P是一次值 S是二次值
-                                 * 3、S(二次值）情况下：
-                                 *     ①、单位为"V"时候则直接等于；
-                                 *     ②、单位为"kV"时候需要乘以1000
-                                 * 4、P(一次值）情况下：
-                                 *     ①、单位为"V"时候则直接等于；
-                                 *     ②、单位为"kV"时候需要乘以1000
-                                 **************************/
-                                //P是一次值 S是二次值
-                                if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzValueType().equalsIgnoreCase("S")) {
-                                    //判断单位是V还是kV
-                                    if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzUnitName().equalsIgnoreCase("KV")) {
-                                        fValue = fValue * 1000.0f;
                                     } else {
                                         fValue = fValue;
                                     }
                                 }
-                                //P是一次值 S是二次值
+                                //判断单位是V还是kV
-                                else if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzValueType().equalsIgnoreCase("P")) {
+                                else if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzUnitName().equalsIgnoreCase("KV")) {
-                                    //判断单位是V还是kV
+                                    //根据cfg内的变比，将一次值转换成二次值
-                                    if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzUnitName().equalsIgnoreCase("V")) {
+                                    if (comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary() != 0.0f) {
-                                        //根据cfg内的变比，将一次值转换成二次值
+                                        fValue = fValue * 1000.0f * comtradeCfgDTO.getLstAnalogDTO().get(j).getFSecondary() / comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary();
-                                        if (comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary() != 0.0f) {
+                                    } else {
-                                            fValue = fValue * comtradeCfgDTO.getLstAnalogDTO().get(j).getFSecondary() / comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary();
+                                        fValue = fValue;
-                                        } else {
-                                            fValue = fValue;
-                                        }
                                     }
-                                    //判断单位是V还是kV
+                                } else //还有可能是  电流，单位是A
-                                    else if (comtradeCfgDTO.getLstAnalogDTO().get(j).getSzUnitName().equalsIgnoreCase("KV")) {
+                                {
-                                        //根据cfg内的变比，将一次值转换成二次值
+                                    //根据cfg内的变比，将一次值转换成二次值
-                                        if (comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary() != 0.0f) {
+                                    if (comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary() != 0.0f) {
-                                            fValue = fValue * 1000.0f * comtradeCfgDTO.getLstAnalogDTO().get(j).getFSecondary() / comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary();
+                                        fValue = fValue *comtradeCfgDTO.getLstAnalogDTO().get(j).getFSecondary() / comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary();
-                                        } else {
+                                    } else {
-                                            fValue = fValue;
+                                        fValue = fValue;
-                                        }
-                                    } else //还有可能是  电流，单位是A
-                                    {
-                                        //根据cfg内的变比，将一次值转换成二次值
-                                        if (comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary() != 0.0f) {
-                                            fValue = comtradeCfgDTO.getLstAnalogDTO().get(j).getFSecondary() / comtradeCfgDTO.getLstAnalogDTO().get(j).getFPrimary();
-                                        } else {
-                                            fValue = fValue;
-                                        }
                                     }
                                 }
-                                //xValue前移量，假如是第一次时候则需要前移
-                                if (!blxValue && j == 0) {
-                                    xValueAll = (float) (i * 20) / tmpRateDTO.getNOneSample() - comtradeCfgDTO.getNPush();
-                                    blxValue = true;
-                                    //只增加一个xValue的值 //增加时间值
-                                    tmpWaveData.add((float) (Math.round(xValueAll * 100)) / 100);
-                                } else if (j == 0) {
-                                    xValueAll += (float) nWaveSpan * dfValue;
-                                    //只增加一个xValue的值 //增加时间值
-                                    tmpWaveData.add((float) (Math.round(xValueAll * 100)) / 100);
-                                }
-
-                                //不同通道yValue的值都需要增加，最终成ABC三相 //每个通道的值
-                                tmpWaveData.add((float) (Math.round(fValue * 100)) / 100);
                             }
-                            //把每个单独的值赋予到整体里面去
+                            //xValue前移量，假如是第一次时候则需要前移
-                            listWaveData.add(tmpWaveData);
+                            if (!blxValue && j == 0) {
+                                xValueAll = (float) (i * 20) / tmpRateDTO.getNOneSample() - comtradeCfgDTO.getNPush();
+                                blxValue = true;
+                                //只增加一个xValue的值 //增加时间值
+                                tmpWaveData.add((float) (Math.round(xValueAll * 100)) / 100);
+                            } else if (j == 0) {
+                                xValueAll += (float) nWaveSpan * dfValue;
+                                //只增加一个xValue的值 //增加时间值
+                                tmpWaveData.add((float) (Math.round(xValueAll * 100)) / 100);
+                            }
+
+                            //不同通道yValue的值都需要增加，最终成ABC三相 //每个通道的值
+                            tmpWaveData.add((float) (Math.round(fValue * 100)) / 100);
                         }
+                        //把每个单独的值赋予到整体里面去
+                        listWaveData.add(tmpWaveData);
+
                     }
                 }
             }
@@ -1370,10 +1720,10 @@ public class WaveFileComponent {
         s = sdf.format(d);
         System.out.println(s);
         WaveFileComponent waveFileComponent = new WaveFileComponent();
-        InputStream cfgStream = waveFileComponent.getFileInputStreamByFilePath("F:\\PQ_PQLD3_9_20250821_081038_640.cfg");
+        InputStream cfgStream = waveFileComponent.getFileInputStreamByFilePath("C:\\Users\\无名\\Desktop\\月报\\2026\\202603\\文档\\暂态事件及波形\\新建文件夹 (3)\\Comtrade\\Comtrade\\10.95.0.201\\PQMonitor_PQM1_001183_20260320_175042_316.CFG");
-        InputStream datStream = waveFileComponent.getFileInputStreamByFilePath("F:\\PQ_PQLD3_9_20250821_081038_640.dat");
+        InputStream datStream = waveFileComponent.getFileInputStreamByFilePath("C:\\Users\\无名\\Desktop\\月报\\2026\\202603\\文档\\暂态事件及波形\\新建文件夹 (3)\\Comtrade\\Comtrade\\10.95.0.201\\PQMonitor_PQM1_001183_20260320_175042_316.DAT");
         // 获取瞬时波形 //获取原始波形值
-        WaveDataDTO waveDataDTO = waveFileComponent.getComtrade(cfgStream, datStream, 1);
+        WaveDataDTO waveDataDTO = waveFileComponent.getComtradeNoAddPoints(cfgStream, datStream, 0);
         d = new Date();
         s = sdf.format(d);
         System.out.println(s);

pqs-common/common-microservice/src/main/java/com/njcn/microservice/listener/NacosLogbackConfigLoader.java

@@ -1,5 +1,7 @@
 package com.njcn.microservice.listener;
 
+import ch.qos.logback.classic.Level;
+import ch.qos.logback.classic.Logger;
 import ch.qos.logback.classic.LoggerContext;
 import ch.qos.logback.classic.joran.JoranConfigurator;
 import org.slf4j.LoggerFactory;
@@ -34,33 +36,46 @@ public class NacosLogbackConfigLoader implements SpringApplicationRunListener, A
 
     @Override
     public void environmentPrepared(ConfigurableEnvironment environment) {
-//        String serverAddr = environment.getProperty("spring.cloud.nacos.config.server-addr");
+        String active = environment.getProperty("spring.profiles.active");
-//        String namespace = environment.getProperty("spring.cloud.nacos.config.namespace");
+        if(!"jb".equalsIgnoreCase(active)){
-//        String projectName = environment.getProperty("microservice.ename");
+            String serverAddr = environment.getProperty("spring.cloud.nacos.config.server-addr");
-//        String logLevel = environment.getProperty("logging.level.root");
+            String namespace = environment.getProperty("spring.cloud.nacos.config.namespace");
-//        String url = String.format("http://%s/nacos/v1/cs/configs?tenant=%s&group=DEFAULT_GROUP&dataId=logback.xml", serverAddr, namespace);
+            String projectName = environment.getProperty("microservice.ename");
-//        HttpHeaders headers = new HttpHeaders();
+            String logLevel = environment.getProperty("logging.level.root");
-//        headers.set("cndl408125hawen", "lanxia201");
+            String url = String.format("http://%s/nacos/v1/cs/configs?tenant=%s&group=DEFAULT_GROUP&dataId=logback.xml", serverAddr, namespace);
-//        HttpEntity<String> entity = new HttpEntity<>(headers);
+            HttpHeaders headers = new HttpHeaders();
-//        RestTemplate restTemplate = new RestTemplate();
+            headers.set("cndl408125hawen", "lanxia201");
-//        ResponseEntity<String> response = restTemplate.exchange(url, HttpMethod.GET, entity, String.class);
+            HttpEntity<String> entity = new HttpEntity<>(headers);
-//        if (response.getStatusCode().is2xxSuccessful()) {
+            RestTemplate restTemplate = new RestTemplate();
-//            String logbackConfigContent = response.getBody();
+            ResponseEntity<String> response = restTemplate.exchange(url, HttpMethod.GET, entity, String.class);
-//            //替换项目名称
+            if (response.getStatusCode().is2xxSuccessful()) {
-//            logbackConfigContent = logbackConfigContent.replace("projectDefaultName",projectName);
+                String logbackConfigContent = response.getBody();
-//            logbackConfigContent = logbackConfigContent.replace("logDefaultLevel",logLevel);
+                //替换项目名称
-//            // 应用获取到的Logback配置
+                logbackConfigContent = logbackConfigContent.replace("projectDefaultName",projectName);
-//            applyLogbackConfig(logbackConfigContent);
+                logbackConfigContent = logbackConfigContent.replace("logDefaultLevel",logLevel);
-//        }
+                // 应用获取到的Logback配置
+                applyLogbackConfig(logbackConfigContent,logLevel);
+            }
+        }
     }
 
-    private void applyLogbackConfig(String logbackConfigContent) {
+    private void applyLogbackConfig(String logbackConfigContent,String logLevel) {
         LoggerContext context = (LoggerContext) LoggerFactory.getILoggerFactory();
         JoranConfigurator configurator = new JoranConfigurator();
         configurator.setContext(context);
         context.reset();
         try (ByteArrayInputStream inputStream = new ByteArrayInputStream(logbackConfigContent.getBytes(StandardCharsets.UTF_8))) {
             configurator.doConfigure(inputStream);
+            Logger root = context.getLogger(org.slf4j.Logger.ROOT_LOGGER_NAME);
+            if("debug".equalsIgnoreCase(logLevel)){
+                root.setLevel(Level.DEBUG);
+            }
+            if("info".equalsIgnoreCase(logLevel)){
+                root.setLevel(Level.INFO);
+            }
+            if("error".equalsIgnoreCase(logLevel)){
+                root.setLevel(Level.ERROR);
+            }
         } catch (Exception e) {
             e.printStackTrace();
         }

pqs-common/common-mq/src/main/java/com/njcn/mq/constant/BusinessTopic.java

@@ -77,10 +77,39 @@ public interface BusinessTopic {
      */
     String REPLY_RECALL_TOPIC = "reply_recall_Topic";
 
+    /**
+     * 治理心跳过期处理主题
+     */
+    String HEARTBEAT_TIMEOUT_TOPIC = "heartbeat_timeout_topic";
+
+
     /********************************数据中心*********************************/
 
     String RMP_EVENT_DETAIL_TOPIC = "rmpEventDetailTopic";
 
+//    /**
+//     * 云前置文件信息请求主题
+//     */
+//    String FILE_INFO_REQUEST_TOPIC = "fileInfoRequestTopic";
+//
+//    /**
+//     * 云前置文件信息响应主题
+//     */
+//    String FILE_INFO_RESPONSE_TOPIC = "fileInfoResponseTopic";
+//
+//    /**
+//     * 云前置文件下载请求主题
+//     */
+//    String FILE_DOWNLOAD_REQUEST_TOPIC = "fileDownloadRequestTopic";
+//    /**
+//     * 云前置文件下载响应主题
+//     */
+//    String FILE_DOWNLOAD_RESPONSE_TOPIC = "fileDownloadResponseTopic";
+
+    String CLOUD_TOPIC = "Cloud_Topic";
+
+    String CLOUD_REPLY_TOPIC = "Cloud_Reply_Topic";
+
 
     interface AppDataTag {
 
@@ -124,4 +153,17 @@ public interface BusinessTopic {
         String STREAM_TAG = "streamInfo";
     }
 
+    interface HeartTag {
+
+        /**
+         * apf 心跳
+         */
+        String APF_TAG = "apf";
+
+        /**
+         * cld 心跳
+         */
+        String CLD_TAG = "cld";
+    }
+
 }

pqs-common/common-mq/src/main/java/com/njcn/mq/message/HeartbeatTimeoutMessage.java

@@ -0,0 +1,27 @@
+package com.njcn.mq.message;
+
+import com.njcn.middle.rocket.domain.BaseMessage;
+import lombok.AllArgsConstructor;
+import lombok.Data;
+import lombok.EqualsAndHashCode;
+import lombok.NoArgsConstructor;
+
+import java.io.Serializable;
+
+/**
+ * @author xy
+ */
+@Data
+@EqualsAndHashCode(callSuper = true)
+@AllArgsConstructor
+@NoArgsConstructor
+public class HeartbeatTimeoutMessage extends BaseMessage implements Serializable {
+
+    private static final long serialVersionUID = 1L;
+
+    private String nDid;
+
+    private Long timestamp;
+
+    private Integer delayLevel;
+}

pqs-common/common-mq/src/main/java/com/njcn/mq/template/BZEventMessageTemplate.java

@@ -1,6 +1,6 @@
 package com.njcn.mq.template;
 
-import com.alibaba.nacos.shaded.com.google.gson.Gson;
+import com.alibaba.fastjson.JSON;
 import com.njcn.middle.rocket.domain.BaseMessage;
 import com.njcn.middle.rocket.template.RocketMQEnhanceTemplate;
 import com.njcn.mq.constant.BusinessResource;
@@ -25,7 +25,7 @@ public class BZEventMessageTemplate extends RocketMQEnhanceTemplate {
     public SendResult sendMember(Object message, String tag) {
         BaseMessage baseMessage = new BaseMessage();
         baseMessage.setSource(BusinessResource.WEB_RESOURCE);
-        baseMessage.setMessageBody(new Gson().toJson(message));
+        baseMessage.setMessageBody(JSON.toJSONString(message));
         return send(BusinessTopic.ASK_RECALL_TOPIC,tag,baseMessage);
     }
 }

pqs-common/common-mq/src/main/java/com/njcn/mq/template/CldControlMessageTemplate.java

@@ -1,6 +1,6 @@
 package com.njcn.mq.template;
 
-import com.alibaba.nacos.shaded.com.google.gson.Gson;
+import com.google.gson.Gson;
 import com.njcn.middle.rocket.domain.BaseMessage;
 import com.njcn.middle.rocket.template.RocketMQEnhanceTemplate;
 import com.njcn.mq.constant.BusinessResource;

pqs-common/common-mq/src/main/java/com/njcn/mq/template/CldUpdateLedgerMessageTemplate.java

@@ -1,6 +1,6 @@
 package com.njcn.mq.template;
 
-import com.alibaba.nacos.shaded.com.google.gson.Gson;
+import com.google.gson.Gson;
 import com.njcn.middle.rocket.domain.BaseMessage;
 import com.njcn.middle.rocket.template.RocketMQEnhanceTemplate;
 import com.njcn.mq.constant.BusinessResource;

pqs-common/common-mq/src/main/java/com/njcn/mq/template/HeartbeatTimeoutMessageTemplate.java

@@ -0,0 +1,29 @@
+package com.njcn.mq.template;
+
+import com.njcn.middle.rocket.template.RocketMQEnhanceTemplate;
+import com.njcn.mq.constant.BusinessResource;
+import com.njcn.mq.constant.BusinessTopic;
+import com.njcn.mq.message.HeartbeatTimeoutMessage;
+import org.apache.rocketmq.client.producer.SendResult;
+import org.apache.rocketmq.spring.core.RocketMQTemplate;
+import org.springframework.stereotype.Component;
+
+/**
+ * 类的介绍：
+ *
+ * @author xuyang
+ * @version 1.0.0
+ * @createTime 2023/8/11 15:28
+ */
+@Component
+public class HeartbeatTimeoutMessageTemplate extends RocketMQEnhanceTemplate {
+
+    public HeartbeatTimeoutMessageTemplate(RocketMQTemplate template) {
+        super(template);
+    }
+
+    public SendResult sendMember(HeartbeatTimeoutMessage heartbeatTimeoutMessage) {
+        heartbeatTimeoutMessage.setSource(BusinessResource.WEB_RESOURCE);
+        return send(BusinessTopic.HEARTBEAT_TIMEOUT_TOPIC, BusinessTopic.HeartTag.APF_TAG, heartbeatTimeoutMessage, heartbeatTimeoutMessage.getDelayLevel());
+    }
+}

pqs-common/common-mq/src/main/java/com/njcn/mq/template/RealDataMessageTemplate.java

@@ -1,6 +1,6 @@
 package com.njcn.mq.template;
 
-import com.alibaba.nacos.shaded.com.google.gson.Gson;
+import com.google.gson.Gson;
 import com.njcn.middle.rocket.domain.BaseMessage;
 import com.njcn.middle.rocket.template.RocketMQEnhanceTemplate;
 import com.njcn.mq.constant.BusinessResource;

pqs-common/common-oss/pom.xml

@@ -48,6 +48,28 @@
             <artifactId>minioss-springboot-starter</artifactId>
             <version>1.0.0</version>
         </dependency>
+        <dependency>
+            <groupId>com.njcn</groupId>
+            <artifactId>aliyun-oss-springboot-starter</artifactId>
+            <version>1.0.0</version>
+            <exclusions>
+                <exclusion>
+                    <groupId>org.apache.logging.log4j</groupId>
+                    <artifactId>log4j-core</artifactId>
+                </exclusion>
+                <exclusion>
+                    <groupId>org.apache.logging.log4j</groupId>
+                    <artifactId>log4j-api</artifactId>
+                </exclusion>
+            </exclusions>
+        </dependency>
+
+        <dependency>
+            <groupId>com.aliyun.oss</groupId>
+            <artifactId>aliyun-sdk-oss</artifactId>
+            <version>3.18.0</version>
+            <optional>false</optional>
+        </dependency>
     </dependencies>
 
 </project>

pqs-common/common-oss/src/main/java/com/njcn/oss/constant/GeneralConstant.java

@@ -13,6 +13,7 @@ public interface GeneralConstant {
     Integer LOCAL_DISK = 1;
     Integer HUAWEI_OBS = 2;
     Integer MINIO_OSS = 3;
+    Integer AliYUN_OSS = 4;
 
     /***
      * 波形文件的3种后缀

pqs-common/common-oss/src/main/java/com/njcn/oss/constant/OssPath.java

@@ -12,6 +12,8 @@ public interface OssPath {
      */
     String WAVE_DIR="comtrade/";
 
+    String WAVE_FILE="wave/";
+
     /***
      * 下载文件
      */
@@ -167,4 +169,14 @@ public interface OssPath {
      */
     String CONFIGURATIONNAME = "configuration.json";
 
+    /**
+     * APP 稳态报告路径
+     */
+    String APP_HARMONIC_REPORT = "app/report/harmonic/";
+
+    /**
+     * APP 暂态报告路径
+     */
+    String APP_EVENT_REPORT = "app/report/event/";
+
 }

pqs-common/common-oss/src/main/java/com/njcn/oss/utils/FileStorageUtil.java

@@ -1,10 +1,13 @@
 package com.njcn.oss.utils;
 
 import cn.hutool.core.io.FileUtil;
-import cn.hutool.core.lang.UUID;
 import cn.hutool.core.util.IdUtil;
+import com.aliyun.oss.OSS;
+import com.njcn.ali.oss.config.AliYunOssConfig;
+import com.njcn.ali.oss.util.AliYunOssUtils;
 import com.njcn.common.config.GeneralInfo;
 import com.njcn.common.pojo.exception.BusinessException;
+import com.njcn.huawei.obs.config.HuaweiObsProperties;
 import com.njcn.huawei.obs.util.OBSUtil;
 import com.njcn.minioss.bo.MinIoUploadResDTO;
 import com.njcn.minioss.config.MinIossProperties;
@@ -12,8 +15,9 @@ import com.njcn.minioss.util.MinIoUtils;
 import com.njcn.oss.constant.GeneralConstant;
 import com.njcn.oss.constant.OssPath;
 import com.njcn.oss.enums.OssResponseEnum;
+import com.obs.services.ObsClient;
+import com.obs.services.model.PutObjectRequest;
 import io.minio.*;
-import io.minio.errors.*;
 import io.minio.messages.Item;
 import lombok.RequiredArgsConstructor;
 import lombok.extern.slf4j.Slf4j;
@@ -66,6 +70,16 @@ public class FileStorageUtil {
 
     private final MinIossProperties minIossProperties;
 
+    /**
+     * 阿里云文件服务器
+     */
+    private final AliYunOssUtils aliYunOssUtils;
+
+    private final HuaweiObsProperties huaweiObsProperties;
+
+    private final OSS ossClient;
+    private final AliYunOssConfig ossConfig;
+
 
     /***
      * 上传MultipartFile文件，
@@ -79,7 +93,7 @@ public class FileStorageUtil {
         if (generalInfo.getBusinessFileStorage() == GeneralConstant.HUAWEI_OBS) {
             filePath = dir + minIoUtils.minFileName(multipartFile.getOriginalFilename());
             obsUtil.uploadMultipart(multipartFile, filePath);
-        } else if(generalInfo.getBusinessFileStorage() == GeneralConstant.MINIO_OSS){
+        } else if (generalInfo.getBusinessFileStorage() == GeneralConstant.MINIO_OSS) {
             try {
                 //把名称存入数据
                 MinIoUploadResDTO minIoUploadResDTO = minIoUtils.upload(multipartFile, minIossProperties.getBucket(), dir);
@@ -87,11 +101,15 @@ public class FileStorageUtil {
             } catch (Exception e) {
                 throw new BusinessException(OssResponseEnum.UPLOAD_FILE_ERROR);
             }
-        }else {
+        } else if (generalInfo.getBusinessFileStorage() == GeneralConstant.AliYUN_OSS) {
+            filePath = dir;
+            aliYunOssUtils.uploadFile(dir, multipartFile);
+        } else {
             try {
                 // 构建完整目录：基准目录 + dir子目录
                 Path basePath = Paths.get(generalInfo.getLocalStorePath());
-                Path uploadPath = basePath.resolve(dir); // 将dir作为子目录添加
+                // 将dir作为子目录添加
+                Path uploadPath = basePath.resolve(dir);
 
                 // 确保完整目录存在（包括dir子目录）
                 if (!Files.exists(uploadPath)) {
@@ -135,6 +153,9 @@ public class FileStorageUtil {
         if (generalInfo.getBusinessFileStorage() == GeneralConstant.HUAWEI_OBS) {
             filePath = dir + minIoUtils.minFileName(multipartFile.getOriginalFilename());
             obsUtil.uploadMultipart(multipartFile, filePath);
+        } else if (generalInfo.getBusinessFileStorage() == GeneralConstant.AliYUN_OSS) {
+            filePath = dir;
+            aliYunOssUtils.uploadFile(dir, multipartFile);
         } else {
             try {
                 //把名称存入数据
@@ -160,7 +181,7 @@ public class FileStorageUtil {
         if (generalInfo.getBusinessFileStorage() == GeneralConstant.HUAWEI_OBS) {
             filePath = dir + minIoUtils.minFileName(fileName);
             obsUtil.uploadStream(inputStream, filePath);
-        } else if (generalInfo.getBusinessFileStorage() == GeneralConstant.MINIO_OSS){
+        } else if (generalInfo.getBusinessFileStorage() == GeneralConstant.MINIO_OSS) {
             try {
                 //把名称存入数据
                 MinIoUploadResDTO minIoUploadResDTO = minIoUtils.uploadStream(inputStream, minIossProperties.getBucket(), dir, minIoUtils.minFileName(fileName));
@@ -168,14 +189,17 @@ public class FileStorageUtil {
             } catch (Exception e) {
                 throw new BusinessException(OssResponseEnum.UPLOAD_FILE_ERROR);
             }
-        }else {
+        } else if (generalInfo.getBusinessFileStorage() == GeneralConstant.AliYUN_OSS) {
+            filePath = dir + fileName;
+            aliYunOssUtils.uploadFile(filePath, inputStream);
+        } else {
             // 本地存储逻辑
             try {
                 // 1. 获取本地存储路径
                 String localStoragePath = generalInfo.getLocalStorePath();
 
                 // 2. 确保目录存在（如果不存在则创建）
-                File targetDir = new File(localStoragePath +File.separator+ dir);
+                File targetDir = new File(localStoragePath + File.separator + dir);
                 if (!targetDir.exists()) {
                     boolean created = targetDir.mkdirs();
                     if (!created) {
@@ -193,7 +217,7 @@ public class FileStorageUtil {
                 // 5. 返回相对路径
                 filePath = dir + finalFileName;
             } catch (IOException e) {
-                throw new BusinessException(OssResponseEnum.UPLOAD_FILE_ERROR,e.getMessage());
+                throw new BusinessException(OssResponseEnum.UPLOAD_FILE_ERROR, e.getMessage());
             }
         }
         return filePath;
@@ -209,6 +233,9 @@ public class FileStorageUtil {
         if (generalInfo.getBusinessFileStorage() == GeneralConstant.HUAWEI_OBS) {
             filePath = dir + minIoUtils.minFileName(fileName);
             obsUtil.uploadStream(inputStream, filePath);
+        } else if (generalInfo.getBusinessFileStorage() == GeneralConstant.AliYUN_OSS) {
+            filePath = dir + fileName;
+            aliYunOssUtils.uploadFile(filePath, inputStream);
         } else {
             try {
                 //把名称存入数据
@@ -232,6 +259,8 @@ public class FileStorageUtil {
         String url;
         if (generalInfo.getBusinessFileStorage() == GeneralConstant.HUAWEI_OBS) {
             url = obsUtil.getFileUrl(filePath);
+        } else if (generalInfo.getBusinessFileStorage() == GeneralConstant.AliYUN_OSS) {
+            url = aliYunOssUtils.generatePresignedUrl(filePath, 3600);
         } else {
             url = minIoUtils.getObjectUrl(minIossProperties.getBucket(), filePath, 7 * 24 * 60 * 60);
         }
@@ -250,10 +279,12 @@ public class FileStorageUtil {
         try {
             if (generalInfo.getBusinessFileStorage() == GeneralConstant.HUAWEI_OBS) {
                 inputStream = obsUtil.downloadStream(filePath);
-            } else if(generalInfo.getBusinessFileStorage() == GeneralConstant.MINIO_OSS) {
+            } else if (generalInfo.getBusinessFileStorage() == GeneralConstant.MINIO_OSS) {
                 inputStream = minIoUtils.downloadStream(minIossProperties.getBucket(), filePath);
-            }else {
+            } else if (generalInfo.getBusinessFileStorage() == GeneralConstant.AliYUN_OSS) {
-                Path path = Paths.get(generalInfo.getLocalStorePath()+File.separator+filePath);
+                inputStream = aliYunOssUtils.downloadStream(filePath);
+            } else {
+                Path path = Paths.get(generalInfo.getLocalStorePath() + File.separator + filePath);
                 inputStream = Files.newInputStream(path);
             }
         } catch (Exception exception) {
@@ -274,11 +305,13 @@ public class FileStorageUtil {
         try {
             if (generalInfo.getBusinessFileStorage() == GeneralConstant.HUAWEI_OBS) {
                 inputStream = obsUtil.downloadStream(filePath);
-            } else if(generalInfo.getBusinessFileStorage() == GeneralConstant.MINIO_OSS){
+            } else if (generalInfo.getBusinessFileStorage() == GeneralConstant.MINIO_OSS) {
                 inputStream = minIoUtils.downloadStream(minIossProperties.getBucket(), filePath);
-            }else {
+            } else if (generalInfo.getBusinessFileStorage() == GeneralConstant.AliYUN_OSS) {
+                inputStream = aliYunOssUtils.downloadStream(filePath);
+            } else {
                 // 本地存储处理
-                Path path = Paths.get(generalInfo.getLocalStorePath()+File.separator+filePath);
+                Path path = Paths.get(generalInfo.getLocalStorePath() + File.separator + filePath);
                 inputStream = Files.newInputStream(path);
 
                 // 设置下载文件名（从路径中提取）
@@ -331,14 +364,16 @@ public class FileStorageUtil {
     public void deleteFile(String fileName) {
         if (generalInfo.getBusinessFileStorage() == GeneralConstant.HUAWEI_OBS) {
             obsUtil.delete(fileName);
-        } else if(generalInfo.getBusinessFileStorage() == GeneralConstant.MINIO_OSS){
+        } else if (generalInfo.getBusinessFileStorage() == GeneralConstant.MINIO_OSS) {
             minIoUtils.removeObject(minIossProperties.getBucket(), fileName);
-        } else if(generalInfo.getBusinessFileStorage() == GeneralConstant.LOCAL_DISK){
+        } else if (generalInfo.getBusinessFileStorage() == GeneralConstant.AliYUN_OSS) {
-            Path path = Paths.get(generalInfo.getLocalStorePath()+File.separator+fileName);
+            aliYunOssUtils.deleteFile(fileName);
+        } else if (generalInfo.getBusinessFileStorage() == GeneralConstant.LOCAL_DISK) {
+            Path path = Paths.get(generalInfo.getLocalStorePath() + File.separator + fileName);
             try {
                 Files.delete(path);
             } catch (IOException e) {
-                log.info("删除本地文件{}失败失败原因{}", path,e.getMessage());
+                log.info("删除本地文件{}失败失败原因{}", path, e.getMessage());
             }
         }
     }
@@ -409,11 +444,70 @@ public class FileStorageUtil {
 
             file = File.createTempFile(lastItem.objectName(), "xlsx");
             FileUtil.writeFromStream(stream, file);
-        }else if(generalInfo.getBusinessFileStorage() == GeneralConstant.HUAWEI_OBS){
+        } else if (generalInfo.getBusinessFileStorage() == GeneralConstant.HUAWEI_OBS) {
             file = obsUtil.getLastFile(OssPath.LOGBAK);
-
+        } else if (generalInfo.getBusinessFileStorage() == GeneralConstant.AliYUN_OSS) {
+            file = aliYunOssUtils.getLastFile(directory);
         }
         return file;
     }
 
+    public void mkdir(String directoryPath) {
+        if (generalInfo.getBusinessFileStorage() == GeneralConstant.HUAWEI_OBS) {
+            this.createDirectoryHW(directoryPath);
+        } else if (generalInfo.getBusinessFileStorage() == GeneralConstant.MINIO_OSS) {
+            minIoUtils.createDirectory(minIossProperties.getBucket(), directoryPath);
+        } else if (generalInfo.getBusinessFileStorage() == GeneralConstant.AliYUN_OSS) {
+            this.createDirectoryAli(directoryPath);
+        } else {
+
+        }
+    }
+
+    /**
+     * 华为文件服务器创建空目录
+     *
+     * @param dirPath
+     */
+    private void createDirectoryHW(String dirPath) {
+        ObsClient obsClient = null;
+        try {
+            obsClient = this.huaweiObsProperties.getInstance();
+            String bucketName = this.huaweiObsProperties.getObs().getBucket();
+
+            // 确保路径以 / 结尾
+            String directoryKey = dirPath.endsWith("/") ? dirPath : dirPath + "/";
+
+            // 创建空对象作为目录占位符
+            InputStream emptyStream = new ByteArrayInputStream(new byte[0]);
+            PutObjectRequest request = new PutObjectRequest(bucketName, directoryKey, emptyStream);
+            obsClient.putObject(request);
+
+            log.info("已创建目录占位符：" + directoryKey);
+        } catch (Exception e) {
+            throw new RuntimeException("创建目录失败" + dirPath, e);
+        } finally {
+            this.huaweiObsProperties.destroy(obsClient);
+        }
+    }
+
+
+    /**
+     * 阿里云文件服务器创建空目录
+     *
+     * @param dirPath
+     */
+    public void createDirectoryAli(String dirPath) {
+        try {
+            // 确保路径以 / 结尾，表示目录
+            String directoryKey = dirPath.endsWith("/") ? dirPath : dirPath + "/";
+
+            // 创建空输入流作为目录占位符
+            ByteArrayInputStream emptyStream = new ByteArrayInputStream(new byte[0]);
+
+            this.ossClient.putObject(this.ossConfig.getBucket(), directoryKey, emptyStream);
+        } catch (Exception e) {
+            throw new RuntimeException("创建目录失败：" + dirPath, e);
+        }
+    }
 }

pqs-common/common-poi/src/main/java/com/njcn/poi/excel/ExcelUtil.java

@@ -239,18 +239,47 @@ public class ExcelUtil {
      * @param strings  下拉内容
      */
     public static void selectList(Workbook workbook, int firstCol, int lastCol, String[] strings) {
-        Sheet sheet = workbook.getSheetAt(0);
+//        Sheet sheet = workbook.getSheetAt(0);
-        //  生成下拉列表
+//        //  生成下拉列表
-        //  只对(x，x)单元格有效
+//        //  只对(x，x)单元格有效
-        CellRangeAddressList cellRangeAddressList = new CellRangeAddressList(2, 65535, firstCol, lastCol);
+//        CellRangeAddressList cellRangeAddressList = new CellRangeAddressList(2, 65535, firstCol, lastCol);
-        //  生成下拉框内容
+//        //  生成下拉框内容
-        DataValidationHelper dvHelper = sheet.getDataValidationHelper();
+//        DataValidationHelper dvHelper = sheet.getDataValidationHelper();
-        XSSFDataValidationConstraint dvConstraint = (XSSFDataValidationConstraint)
+//        XSSFDataValidationConstraint dvConstraint = (XSSFDataValidationConstraint)
-                dvHelper.createExplicitListConstraint(strings);
+//                dvHelper.createExplicitListConstraint(strings);
-        XSSFDataValidation validation = (XSSFDataValidation) dvHelper.createValidation(
+//        XSSFDataValidation validation = (XSSFDataValidation) dvHelper.createValidation(
-                dvConstraint, cellRangeAddressList);
+//                dvConstraint, cellRangeAddressList);
-        //  对sheet页生效
+//        //  对sheet页生效
-        sheet.addValidationData(validation);
+//        sheet.addValidationData(validation);
+
+        Sheet  targetSheet = workbook.getSheetAt(0);
+
+        // ===================== 关键：每个下拉用唯一名称的隐藏Sheet =====================
+        String uniqueHiddenName = "dropdown_" + firstCol + "_" + lastCol + "_" + System.currentTimeMillis();
+        Sheet hiddenSheet = workbook.createSheet(uniqueHiddenName);
+        // 隐藏数据源Sheet
+        workbook.setSheetHidden(workbook.getSheetIndex(hiddenSheet), true);
+
+        // 写入选项到隐藏Sheet
+        for (int i = 0; i < strings.length; i++) {
+            Row row = hiddenSheet.createRow(i);
+            Cell cell = row.createCell(0);
+            cell.setCellValue(strings[i]);
+        }
+
+        // 构造引用公式（无长度限制）
+        String formula = uniqueHiddenName + "!$A$1:$A$" + strings.length;
+
+        // 下拉作用范围：第3行 ~ 65536行
+        CellRangeAddressList range = new CellRangeAddressList(2, 65535, firstCol, lastCol);
+        DataValidationHelper helper = targetSheet.getDataValidationHelper();
+        DataValidationConstraint constraint = helper.createFormulaListConstraint(formula);
+        DataValidation validation = helper.createValidation(constraint, range);
+
+        // 必加：防止下拉冲突、不显示
+        validation.setShowErrorBox(true);
+        validation.setShowPromptBox(true);
+        targetSheet.addValidationData(validation);
     }
 
     /**

pqs-common/common-poi/src/main/java/com/njcn/poi/util/PoiUtil.java

@@ -4,13 +4,15 @@ import cn.hutool.core.io.FileUtil;
 import cn.hutool.core.util.CharsetUtil;
 import com.njcn.common.pojo.enums.response.CommonResponseEnum;
 import com.njcn.common.pojo.exception.BusinessException;
-import org.apache.poi.ss.usermodel.Workbook;
+import org.apache.poi.ss.usermodel.*;
+import org.apache.poi.xssf.usermodel.XSSFRichTextString;
 
 import javax.servlet.ServletOutputStream;
 import javax.servlet.http.HttpServletResponse;
 import java.io.File;
 import java.io.FileInputStream;
 import java.net.URLEncoder;
+import java.util.Objects;
 
 /**
  * @author hongawen
@@ -76,6 +78,59 @@ public class PoiUtil {
             fileName = URLEncoder.encode(fileName, CharsetUtil.UTF_8);
             response.setHeader("Content-Disposition", "attachment; filename=\"" + fileName + "\"");
             response.setContentType("application/octet-stream;charset=" + CharsetUtil.UTF_8);
+            //将带*号的列变成红色
+            Sheet sheetAt = workbook.getSheetAt(0);
+            //获取列数
+            int physicalNumberOfCells = sheetAt.getRow(0).getPhysicalNumberOfCells();
+            //没有表格标题,只有表格头
+            for (int i = 0; i < 2; i++) {
+                //获取行
+                Row row = sheetAt.getRow(i);
+                if (Objects.isNull(row)) {
+                    continue;
+                }
+                for (int j = 0; j < physicalNumberOfCells; j++) {
+                    //获取单元格对象
+                    Cell cell = row.getCell(j);
+                    //获取单元格样式对象
+                    CellStyle cellStyle = workbook.createCellStyle();
+                    //获取单元格内容对象
+                    Font font = workbook.createFont();
+                    font.setFontHeightInPoints((short) 12);
+                    //一定要装入 样式中才会生效
+                    cellStyle.setFont(font);
+                    //设置居中对齐
+                    cellStyle.setAlignment(HorizontalAlignment.CENTER);
+                    cellStyle.setVerticalAlignment(VerticalAlignment.CENTER);
+                    //设置单元格字体颜色
+                    cell.setCellStyle(cellStyle);
+                    //获取当前值
+                    String stringCellValue = cell.getStringCellValue();
+                    if (stringCellValue.contains("*")) {
+                        // 创建一个富文本
+                        XSSFRichTextString xssfRichTextString = new XSSFRichTextString(stringCellValue);
+                        int startIndex = stringCellValue.indexOf("*");
+                        int entIndex = stringCellValue.lastIndexOf("*");
+                        if (entIndex != 0) {
+                            Font font3 = workbook.createFont();
+                            font3.setFontHeightInPoints((short) 12);
+                            font3.setColor(Font.COLOR_NORMAL);
+                            xssfRichTextString.applyFont(0, entIndex, font3);
+                        }
+                        //设置带*样式
+                        Font font1 = workbook.createFont();
+                        font1.setFontHeightInPoints((short) 12);
+                        font1.setColor(Font.COLOR_RED);
+                        xssfRichTextString.applyFont(startIndex, entIndex + 1, font1);
+                        //其他样式
+                        Font font2 = workbook.createFont();
+                        font2.setFontHeightInPoints((short) 12);
+                        font2.setColor(Font.COLOR_NORMAL);
+                        xssfRichTextString.applyFont(entIndex + 1, stringCellValue.length(), font2);
+                        cell.setCellValue(xssfRichTextString);
+                    }
+                }
+            }
             workbook.write(outputStream);
         } catch (Exception e) {
             e.printStackTrace();

pqs-common/common-redis/src/main/java/com/njcn/redis/pojo/enums/AppRedisKey.java

@@ -115,4 +115,8 @@ public interface AppRedisKey {
      * 补召文件
      */
     String MAKE_UP_FILES = "makeUpFilesKey:";
+
+    String COMMON_REQUEST = "commonRequestKey:";
+
+    String COMMON_RESOPNSE = "commonResponseKey:";
 }

pqs-common/common-redis/src/main/java/com/njcn/redis/pojo/enums/RedisKeyEnum.java

@@ -45,7 +45,22 @@ public enum RedisKeyEnum {
     /**
      * 云前置心跳
      */
-    CLD_HEART_BEAT_KEY("CLD_HEART_BEAT:", 180L);
+    CLD_HEART_BEAT_KEY("CLD_HEART_BEAT:", 180L),
+
+    /**
+     * 用户日志队列
+     */
+    USER_LOG_QUEUE("USER_LOG_QUEUE", -1L),
+
+    /**
+     * 用户日志邮件推送队列
+     */
+    USER_LOG_EMAIL_QUEUE("USER_LOG_EMAIL_QUEUE", -1L),
+
+    /**
+     * 终端日志
+     */
+    DEVICE_LOG_QUEUE("DEVICE_LOG_QUEUE", -1L);
 
 
     private final String key;

pqs-common/common-redis/src/main/java/com/njcn/redis/utils/RedisMessageQueueUtil.java

@@ -0,0 +1,66 @@
+package com.njcn.redis.utils;
+
+import lombok.RequiredArgsConstructor;
+import lombok.extern.slf4j.Slf4j;
+import org.springframework.data.redis.core.RedisTemplate;
+import org.springframework.stereotype.Component;
+
+import java.util.concurrent.TimeUnit;
+
+/**
+ * Redis 消息队列工具类
+ */
+@Slf4j
+@Component
+@RequiredArgsConstructor
+public class RedisMessageQueueUtil {
+
+    private final RedisTemplate<String, Object> redisTemplate;
+
+    /**
+     * 推送消息到队列（左推）
+     *
+     * @param queueKey 队列Key
+     * @param message  消息内容（JSON字符串）
+     */
+    public void pushMessage(String queueKey, String message) {
+        try {
+            redisTemplate.opsForList().leftPush(queueKey, message);
+        } catch (Exception e) {
+            log.error("推送消息到队列失败，queueKey={}", queueKey, e);
+            throw e;
+        }
+    }
+
+    /**
+     * 阻塞式弹出消息（右弹）
+     *
+     * @param queueKey 队列Key
+     * @param timeout  超时时间（秒）
+     * @return 消息内容，超时返回null
+     */
+    public String popMessage(String queueKey, long timeout) {
+        try {
+            Object result = redisTemplate.opsForList().rightPop(queueKey, timeout, TimeUnit.SECONDS);
+            return result != null ? result.toString() : null;
+        } catch (Exception e) {
+            log.error("弹出消息失败，queueKey={}", queueKey, e);
+            return null;
+        }
+    }
+
+    /**
+     * 获取队列长度（用于监控）
+     *
+     * @param queueKey 队列Key
+     * @return 队列长度
+     */
+    public Long getQueueSize(String queueKey) {
+        try {
+            return redisTemplate.opsForList().size(queueKey);
+        } catch (Exception e) {
+            log.error("获取队列长度失败，queueKey={}", queueKey, e);
+            return 0L;
+        }
+    }
+}

pqs-common/common-redis/src/main/java/com/njcn/redis/utils/RedisUtil.java

@@ -2,9 +2,7 @@ package com.njcn.redis.utils;
 
 import lombok.RequiredArgsConstructor;
 import org.springframework.data.redis.connection.lettuce.LettuceConnectionFactory;
-import org.springframework.data.redis.core.RedisCallback;
+import org.springframework.data.redis.core.*;
-import org.springframework.data.redis.core.RedisTemplate;
-import org.springframework.data.redis.core.StringRedisTemplate;
 import org.springframework.stereotype.Component;
 
 import java.nio.charset.StandardCharsets;
@@ -325,13 +323,54 @@ public class RedisUtil {
      * @return
      */
     public List<?> getLikeListAllValues(String key) {
-        List<Object> info=new ArrayList<>();
+        List<Object> info = new ArrayList<>();
-        for (String s : redisTemplate.keys(key + "*")) {
+        // 使用 SCAN 替代 keys，解决 Tair 禁用 KEYS 命令的问题
+        Set<String> keys = redisTemplate.execute((RedisCallback<Set<String>>) connection -> {
+            Set<String> keySet = new HashSet<>();
+            ScanOptions options = ScanOptions.scanOptions()
+                    .match(key + "*")
+                    .count(1000)
+                    .build();
+
+            try (Cursor<byte[]> cursor = connection.scan(options)) {
+                while (cursor.hasNext()) {
+                    keySet.add(new String(cursor.next()));
+                }
+            } catch (Exception e) {
+                throw new RuntimeException("Redis SCAN 模糊查询失败", e);
+            }
+            return keySet;
+        });
+        for (String s : keys) {
             info.add(redisTemplate.opsForValue().get(s));
         }
         return info;
     }
 
+    /**
+     * 根据key模糊查询,并取出所有符合条件的key集合
+     * @return
+     */
+
+    public Set<String> scanKeysByPattern(String pattern, int count) {
+        Set<String> keys = new HashSet<>();
+        ScanOptions options = ScanOptions.scanOptions()
+                .match(pattern)
+                .count(count)
+                .build();
+
+        try (Cursor<byte[]> cursor = redisTemplate.getConnectionFactory()
+                .getConnection()
+                .scan(options)) {
+            while (cursor.hasNext()) {
+                keys.add(new String(cursor.next()));
+            }
+        } catch (Exception e) {
+            throw new RuntimeException("扫描Redis keys失败", e);
+        }
+        return keys;
+    }
+
     /**
      * 数据切库
      * @param dbIndex

pqs-common/common-swagger/src/main/java/com/njcn/swagger/config/Knife4jSwaggerConfig.java

@@ -45,6 +45,9 @@ public class Knife4jSwaggerConfig {
     @Value("${microservice.gateway.url}")
     private String gatewayUrl;
 
+    @Value("${swagger.enable:true}")
+    private Boolean swaggerEnable;
+
     /**
      * swagger通用配置
      */
@@ -56,6 +59,7 @@ public class Knife4jSwaggerConfig {
                 "com.njcn.prepare.harmonic.controller",
                 "com.njcn.prepare.event.controller",
                 "com.njcn.device.pq.controller",
+                "com.njcn.device.terminal.controller",
                 "com.njcn.device.pms.controller",
                 "com.njcn.auth.controller",
                 "com.njcn.system.controller",
@@ -71,6 +75,7 @@ public class Knife4jSwaggerConfig {
                 "com.njcn.cswarn.controller",
                 "com.njcn.csharmonic.controller",
                 "com.njcn.cssystem.controller",
+                "com.njcn.csreport.controller",
                 "com.njcn.advance.controller",
                 "com.njcn.stat.controller",
                 "com.njcn.rt.controller",
@@ -81,7 +86,11 @@ public class Knife4jSwaggerConfig {
                 "com.njcn.supervision.controller",
                 "com.njcn.algorithm",
                 "com.njcn.dataProcess",
-                "com.njcn.migration"
+                "com.njcn.migration",
+                "com.njcn.harmonic.rstatlimitrate.controller",
+                "com.njcn.device.device.controller",
+                "com.njcn.device.userledger.controller",
+                "com.njcn.migration.read.controller"
                 )
                 .collect(Collectors.toList());
         List<GrantType> grantTypes = new ArrayList<>();
@@ -94,7 +103,7 @@ public class Knife4jSwaggerConfig {
         //securyContext
         return new Docket(DocumentationType.SWAGGER_2)
                 .apiInfo(apiInfo())
-                .enable(true)
+                .enable(swaggerEnable)
                 .select()
 //                指定添加swagger注解的方法
 //                .apis(RequestHandlerSelectors.withMethodAnnotation(ApiOperation.class))

pqs-common/common-web/src/main/java/com/njcn/web/config/FeignConfig.java

@@ -47,6 +47,7 @@ public class FeignConfig {
     @Bean
     public Decoder feignDecoder() {
         return (response, type) -> {
+
             String bodyStr = Util.toString(response.body().asReader(Util.UTF_8));
             //对结果进行转换
             HttpResult<Object> result = PubUtils.json2obj(bodyStr, type);
@@ -60,6 +61,8 @@ public class FeignConfig {
             }
             switch (commonResponseEnum) {
                 case SUCCESS:
+//                case NO_DATA:
+//                case FAIL:
                     return result;
                 default:
                     throw new BusinessException(result);

pqs-common/common-web/src/main/java/com/njcn/web/constant/ValidMessage.java

@@ -19,7 +19,7 @@ public interface ValidMessage {
 
     String NAME_NOT_BLANK = "名称不能为空，请检查name参数";
 
-    String NAME_FORMAT_ERROR = "名称格式错误，存在特殊符号或超过20字符，请检查name参数";
+    String NAME_FORMAT_ERROR = "名称格式错误，存在特殊符号或超过32字符，请检查name参数";
 
     String INDUSTRY_NOT_BLANK = "行业不能为空，请检查industry参数";
     String INDUSTRY_FORMAT_ERROR = "行业格式错误，请检查industry参数";

pqs-common/common-web/src/main/java/com/njcn/web/service/impl/LogServiceImpl.java

@@ -1,8 +1,6 @@
 package com.njcn.web.service.impl;
 
-import com.github.tocrhz.mqtt.publisher.MqttPublisher;
 import com.njcn.common.config.GeneralInfo;
-import com.njcn.common.pojo.annotation.OperateInfo;
 import com.njcn.common.pojo.constant.LogInfo;
 import com.njcn.common.pojo.dto.DeviceLogDTO;
 import com.njcn.common.pojo.dto.LogInfoDTO;
@@ -10,6 +8,8 @@ import com.njcn.common.pojo.enums.response.CommonResponseEnum;
 import com.njcn.common.pojo.response.HttpResult;
 import com.njcn.common.utils.PubUtils;
 import com.njcn.common.utils.ReflectCommonUtil;
+import com.njcn.redis.pojo.enums.RedisKeyEnum;
+import com.njcn.redis.utils.RedisMessageQueueUtil;
 import com.njcn.web.advice.DeviceLog;
 import com.njcn.web.service.ILogService;
 import com.njcn.web.utils.RequestUtil;
@@ -46,8 +46,15 @@ public class LogServiceImpl implements ILogService {
 
 
     private final GeneralInfo generalInfo;
+    /**
+     * mqtt处理日志异步发布
+     */
+//    private final MqttPublisher publisher;
 
-    private final MqttPublisher publisher;
+    /**
+     * redis队列处理日志异步发布
+     */
+    private final RedisMessageQueueUtil redisMessageQueueUtil;
 
 
     /**
@@ -82,14 +89,27 @@ public class LogServiceImpl implements ILogService {
         String operateType = ReflectCommonUtil.getOperateTypeByMethod(returnType.getMethod());
         Integer severity = levelStringToNumber(level);
         LogInfoDTO logInfoDTO = new LogInfoDTO(loginName, userName, ip, methodDescribe, operateType, result.equalsIgnoreCase("失败") ? 0 : 1, "", severity, type.equalsIgnoreCase("业务事件") ? 0 : 1, generalInfo.getMicroServiceName(), userIndex, LocalDateTime.now());
-        publisher.send("/userLog", PubUtils.obj2json(logInfoDTO), 2, false);
+//        publisher.send("/userLog", PubUtils.obj2json(logInfoDTO), 2, false);
+
+        redisMessageQueueUtil.pushMessage(
+                RedisKeyEnum.USER_LOG_QUEUE.getKey(),
+                PubUtils.obj2json(logInfoDTO)
+        );
+
         //推送审计消息功能
         if (severity != 0) {
             if (!logInfoDTO.getLoginName().equals(LogInfo.UNKNOWN_USER)) {
-                publisher.send("/userLogPush", PubUtils.obj2json(logInfoDTO), 2, false);
+                /**注意，此处是给前端推送的，如果没有了mqtt协议，此处前端就无消息可消费了*/
+//                publisher.send("/userLogPush", PubUtils.obj2json(logInfoDTO), 2, false);
+
                 //发送邮箱功能
                 if (severity == 2 && logInfoDTO.getResult() == 0) {
                     //publisher.send("/userLogEmailPush", PubUtils.obj2json(logInfoDTO), 2, false);
+
+//                    redisMessageQueueUtil.pushMessage(
+//                            RedisKeyEnum.USER_LOG_EMAIL_QUEUE.getKey(),
+//                            PubUtils.obj2json(logInfoDTO)
+//                    );
                 }
             }
         }
@@ -97,8 +117,11 @@ public class LogServiceImpl implements ILogService {
         if (Objects.nonNull((returnType.getMethod())) && (returnType.getMethod()).isAnnotationPresent(DeviceLog.class)) {
             String deviceOperate = returnType.getMethod().getAnnotation(DeviceLog.class).operateType();
             DeviceLogDTO deviceLogDTO = new DeviceLogDTO(userName, deviceOperate, result.equalsIgnoreCase("失败") ? 0 : 1, "", loginName, userIndex);
-            publisher.send("/deviceLog", PubUtils.obj2json(deviceLogDTO), 2, false);
+//            publisher.send("/deviceLog", PubUtils.obj2json(deviceLogDTO), 2, false);
-
+            redisMessageQueueUtil.pushMessage(
+                    RedisKeyEnum.DEVICE_LOG_QUEUE.getKey(),
+                    PubUtils.obj2json(deviceLogDTO)
+            );
         }
     }
 
@@ -135,7 +158,11 @@ public class LogServiceImpl implements ILogService {
         String operateType = ReflectCommonUtil.getOperateTypeByMethod(method);
         Integer severity = levelStringToNumber(level);
         LogInfoDTO logInfoDTO = new LogInfoDTO(tempLogInfo.getLoginName(), tempLogInfo.getUserName(), tempLogInfo.getIp(), ReflectCommonUtil.getMethodDescribeByMethod(method), operateType, result.equalsIgnoreCase("失败") ? 0 : 1, message, severity, type.equalsIgnoreCase("业务事件") ? 0 : 1, generalInfo.getMicroServiceName(), userIndex, LocalDateTime.now());
-        publisher.send("/userLog", PubUtils.obj2json(logInfoDTO), 1, false);
+//        publisher.send("/userLog", PubUtils.obj2json(logInfoDTO), 1, false);
+        redisMessageQueueUtil.pushMessage(
+                RedisKeyEnum.USER_LOG_QUEUE.getKey(),
+                PubUtils.obj2json(logInfoDTO)
+        );
         auditPush(severity, logInfoDTO);
     }
 
@@ -163,7 +190,11 @@ public class LogServiceImpl implements ILogService {
         Integer severity = levelStringToNumber(level);
         String operateType = ReflectCommonUtil.getOperateTypeByMethod(method);
         LogInfoDTO logInfoDTO = new LogInfoDTO(loginName, "", ip, ReflectCommonUtil.getMethodDescribeByMethod(method), operateType, result.equalsIgnoreCase("失败") ? 0 : 1, message, severity, type.equalsIgnoreCase("业务事件") ? 0 : 1, generalInfo.getMicroServiceName(), loginName, LocalDateTime.now());
-        publisher.send("/userLog", PubUtils.obj2json(logInfoDTO), 1, false);
+//        publisher.send("/userLog", PubUtils.obj2json(logInfoDTO), 1, false);
+        redisMessageQueueUtil.pushMessage(
+                RedisKeyEnum.USER_LOG_QUEUE.getKey(),
+                PubUtils.obj2json(logInfoDTO)
+        );
         auditPush(severity, logInfoDTO);
     }
 
@@ -171,7 +202,12 @@ public class LogServiceImpl implements ILogService {
         //推送审计消息功能
         if (severity != 0) {
             if (!logInfoDTO.getLoginName().equals(LogInfo.UNKNOWN_USER)) {
-                publisher.send("/userLogPush", PubUtils.obj2json(logInfoDTO), 2, false);
+                /**注意，此处是给前端推送的，如果没有了mqtt协议，此处前端就无消息可消费了*/
+//                publisher.send("/userLogPush", PubUtils.obj2json(logInfoDTO), 2, false);
+//                redisMessageQueueUtil.pushMessage(
+//                        RedisKeyEnum.USER_LOG_QUEUE.getKey(),
+//                        PubUtils.obj2json(logInfoDTO)
+//                );
                 //发送邮箱功能
                 if (severity == 2 && logInfoDTO.getResult() == 0) {
                     //publisher.send("/userLogEmailPush", PubUtils.obj2json(logInfoDTO), 2, false);

pqs-common/common-web/src/main/java/com/njcn/web/utils/RestTemplateUtil.java

@@ -1,9 +1,9 @@
 package com.njcn.web.utils;
 
-import org.springframework.http.HttpEntity;
+import org.slf4j.Logger;
-import org.springframework.http.HttpHeaders;
+import org.slf4j.LoggerFactory;
-import org.springframework.http.HttpMethod;
+import org.springframework.http.*;
-import org.springframework.http.ResponseEntity;
+import org.springframework.stereotype.Component;
 import org.springframework.web.client.RestTemplate;
 
 import java.net.URI;
@@ -15,8 +15,11 @@ import java.util.Map;
  * @createDate 2019-02-08
  *
  */
+@Component
 public class RestTemplateUtil {
 
+    private static final Logger log = LoggerFactory.getLogger(RestTemplateUtil.class);
+
     private static final RestTemplate restTemplate = new RestTemplate();
 
     // ----------------------------------GET-------------------------------------------------------
@@ -263,6 +266,24 @@ public class RestTemplateUtil {
         return restTemplate.exchange(url, HttpMethod.POST, requestEntity, responseType, uriVariables);
     }
 
+    public <T> ResponseEntity<T> post(String url, Object requestBody, HttpHeaders headers, Class<T> responseType) {
+        try {
+            if (headers == null) {
+                headers = new HttpHeaders();
+            }
+            headers.setContentType(MediaType.APPLICATION_JSON);
+
+            HttpEntity<Object> entity = new HttpEntity<>(requestBody, headers);
+            log.info("发送POST请求到: {}", url);
+            ResponseEntity<T> response = restTemplate.postForEntity(url, entity, responseType);
+            log.info("POST请求响应状态: {}", response.getStatusCode());
+            return response;
+        } catch (Exception e) {
+            log.error("POST请求异常: {}", e.getMessage(), e);
+            throw e;
+        }
+    }
+
     // ----------------------------------PUT-------------------------------------------------------
 
     /**

pqs-device/common-device-biz/pom.xml

@@ -60,6 +60,7 @@
             <artifactId>pqs-influx</artifactId>
             <version>${project.version}</version>
         </dependency>
+
     </dependencies>
 
 </project>

pqs-device/common-device-biz/src/main/java/com/njcn/device/biz/commApi/CommTerminalGeneralClient.java

@@ -51,6 +51,13 @@ public interface CommTerminalGeneralClient {
     @PostMapping("deptGetLine")
     HttpResult<List<DeptGetChildrenMoreDTO>> deptGetLine(@RequestBody @Validated DeptGetLineParam deptGetLineParam);
 
+    @PostMapping("deptGetLineInfo")
+    HttpResult<List<MonitorCommLedgerInfoDTO>> deptGetLineInfo(@RequestBody @Validated DeptGetLineParam deptGetLineParam);
+
+
+    @PostMapping("deptGetAllLine")
+    HttpResult<List<DeptGetChildrenMoreDTO>> deptGetAllLine(@RequestBody @Validated DeptGetLineParam deptGetLineParam);
+
 
     /**
      * 根据单位获取所有变电站

pqs-device/common-device-biz/src/main/java/com/njcn/device/biz/commApi/fallback/CommTerminalGeneralClientFallbackFactory.java

@@ -15,6 +15,7 @@ import com.njcn.device.biz.utils.DeviceEnumUtil;
 import feign.hystrix.FallbackFactory;
 import lombok.extern.slf4j.Slf4j;
 import org.springframework.stereotype.Component;
+import org.springframework.validation.annotation.Validated;
 import org.springframework.web.bind.annotation.RequestBody;
 
 import java.util.List;
@@ -50,6 +51,19 @@ public class CommTerminalGeneralClientFallbackFactory implements FallbackFactory
                 throw new BusinessException(finalExceptionEnum);
             }
 
+
+            @Override
+            public HttpResult<List<MonitorCommLedgerInfoDTO>> deptGetLineInfo(DeptGetLineParam deptGetLineParam) {
+                log.error("{}异常，降级处理，异常为：{}", "根据部门获取监测点信息", throwable.toString());
+                throw new BusinessException(finalExceptionEnum);
+            }
+
+            @Override
+            public HttpResult<List<DeptGetChildrenMoreDTO>> deptGetAllLine(DeptGetLineParam deptGetLineParam) {
+                log.error("{}异常，降级处理，异常为：{}", "根据单位获取all监测点信息", throwable.toString());
+                throw new BusinessException(finalExceptionEnum);
+            }
+
             @Override
             public HttpResult<List<DeptGetSubStationDTO>> deptSubStation(DeptGetLineParam deptGetLineParam) {
                 log.error("{}异常，降级处理，异常为：{}", "根据单位获取所有变电站", throwable.toString());

pqs-device/common-device-biz/src/main/java/com/njcn/device/biz/enums/DeviceResponseEnum.java

@@ -32,6 +32,7 @@ public enum DeviceResponseEnum {
 
     DEVICE_SAME_NAME("A0290","设备名称已存在"),
     DEVICE_REPETITION("A0291","设备名称重复"),
+    MODEL_NAME_REPEAT("A00350","名称不可重复"),
     DEVICE_IP_REPETITION("A0292","设备ip端口号重复"),
     DEVICE_SAME_IP("A0293","当前设备ip端口号已存在"),
     DEVICE_EMPTY("A0294","设备为空"),

pqs-device/common-device-biz/src/main/java/com/njcn/device/biz/mapper/OverLimitWlMapper.java

@@ -0,0 +1,22 @@
+package com.njcn.device.biz.mapper;
+
+
+import com.baomidou.dynamic.datasource.annotation.DS;
+import com.baomidou.mybatisplus.core.mapper.BaseMapper;
+import com.njcn.device.biz.pojo.po.Overlimit;
+import org.apache.ibatis.annotations.Mapper;
+
+/**
+ * <p>
+ *  Mapper 接口
+ * </p>
+ *
+ * @author xy
+ * @since 2022-01-04
+ */
+@DS("sjzx")
+@Mapper
+public interface OverLimitWlMapper extends BaseMapper<Overlimit> {
+
+
+}

pqs-device/common-device-biz/src/main/java/com/njcn/device/biz/mapper/OverlimitMapper.java

@@ -0,0 +1,28 @@
+package com.njcn.device.biz.mapper;
+
+
+import com.baomidou.mybatisplus.core.mapper.BaseMapper;
+import com.njcn.device.biz.pojo.po.Overlimit;
+import org.apache.ibatis.annotations.Param;
+
+import java.util.List;
+
+/**
+ * <p>
+ *  Mapper 接口
+ * </p>
+ *
+ * @author cdf
+ * @since 2022-01-04
+ */
+public interface OverlimitMapper extends BaseMapper<Overlimit> {
+
+    /**
+     * 获取所有在线投运的监测点限值
+     *
+     * @author cdf
+     * @date 2022/3/23
+     */
+    List<Overlimit> getAllLineOverLimit(@Param("list") List<Integer> list);
+
+}

pqs-device/common-device-biz/src/main/java/com/njcn/device/biz/mapper/PqSensitiveUserMapper.java

@@ -0,0 +1,16 @@
+package com.njcn.device.biz.mapper;
+
+import com.baomidou.mybatisplus.core.mapper.BaseMapper;
+import com.njcn.device.biz.pojo.po.PqSensitiveUser;
+
+/**
+ * <p>
+ *  Mapper 接口
+ * </p>
+ *
+ * @author xy
+ * @since 2025-11-17
+ */
+public interface PqSensitiveUserMapper extends BaseMapper<PqSensitiveUser> {
+
+}

pqs-device/common-device-biz/src/main/java/com/njcn/device/biz/mapper/mapping/OverlimitMapper.xml

@@ -0,0 +1,20 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE mapper PUBLIC "-//mybatis.org//DTD Mapper 3.0//EN" "http://mybatis.org/dtd/mybatis-3-mapper.dtd">
+<mapper namespace="com.njcn.device.biz.mapper.OverlimitMapper">
+
+    <select id="getAllLineOverLimit" resultType="com.njcn.device.biz.pojo.po.Overlimit">
+        select f.* from pq_line a
+        inner join pq_line_detail b on a.id = b.id
+        inner join pq_line c on a.pid = c.id
+        inner join pq_line d on c.pid = d.id
+        inner join pq_device e on d.id = e.id
+        inner join pq_overlimit f on a.id=f.id
+        where e.dev_data_type in
+        <foreach collection="list" item="item" open="(" close=")" separator=",">
+            #{item}
+        </foreach>
+        and e.run_flag = 0
+        and e.dev_model = 1
+    </select>
+
+</mapper>

pqs-device/common-device-biz/src/main/java/com/njcn/device/biz/pojo/dto/LineALLInfoDTO.java

@@ -41,6 +41,11 @@ public class LineALLInfoDTO {
         private Integer num;
         @ApiModelProperty(name = "objName",value = "监测点对象名称")
         private String objName;
+        @ApiModelProperty(name = "objName",value = "电网侧监测点对象名称Id")
+        private String objId;
+        @ApiModelProperty(name = "objName",value = "电网侧监测点对象名称")
+        private String objName2;
+
         @ApiModelProperty(name = "loadType",value = "监测对象类型")
         private String loadType;
         @ApiModelProperty(name = "voltageLevel",value = "电压等级")

pqs-device/common-device-biz/src/main/java/com/njcn/device/biz/pojo/dto/LineDevGetDTO.java

@@ -28,6 +28,8 @@ public class LineDevGetDTO {
 
     private String pointName;
 
+    private Integer lineRunFlag;
+
     /**
      * 装置监测点索引集合
      */

pqs-device/common-device-biz/src/main/java/com/njcn/device/biz/pojo/dto/MonitorCommLedgerInfoDTO.java

@@ -0,0 +1,40 @@
+package com.njcn.device.biz.pojo.dto;
+
+import lombok.Data;
+
+import java.io.Serializable;
+
+/**
+ * @Author: cdf
+ * @CreateTime: 2026-01-06
+ * @Description:
+ */
+@Data
+public class MonitorCommLedgerInfoDTO implements Serializable {
+
+    private static final long serialVersionUID = 1L;
+
+
+    private String monitorId;
+
+    private String monitorName;
+
+    private String gdName;
+
+    private String bdName;
+
+    private String busBarName;
+
+    private String voltageLevel;
+
+    private String shortCapacity;
+
+    private String devCapacity;
+
+    private String dealCapacity;
+
+    private String standardCapacity;
+
+    private Integer timeInterval;
+
+}

pqs-device/common-device-biz/src/main/java/com/njcn/device/biz/pojo/dto/PollutionLineInfoDTO.java

@@ -13,6 +13,8 @@ public class PollutionLineInfoDTO {
     /**
      * 所属变电站
      */
+    private String subStationId;
+
     private String subStationName;
 
     /**
@@ -74,7 +76,10 @@ public class PollutionLineInfoDTO {
      * 电压等级
      */
     private String lineVoltage;
-
+    /**
+     * 变电站电压等级
+     */
+    private String subVoltage;
     /**
      * 装置id
      */
@@ -94,4 +99,9 @@ public class PollutionLineInfoDTO {
      * 监测点名称
      */
     private String lineName;
+
+    /**
+     * 实际安装位置
+     */
+    private String actualArea;
 }

pqs-device/common-device-biz/src/main/java/com/njcn/device/biz/pojo/param/DeptGetLineParam.java

@@ -32,7 +32,6 @@ public class DeptGetLineParam {
     private Boolean monitorStateRunning=true;
 
     @ApiModelProperty(name = "isUpToGrid",value = "0.非送国网 1.需要送国网的")
-
     private Integer isUpToGrid;
     /**
      * 0-电网侧
@@ -48,4 +47,7 @@ public class DeptGetLineParam {
     @ApiModelProperty("监测点运行状态")
     @Range(min = 0, max = 2, message = "监测点运行状态" + ValidMessage.PARAM_FORMAT_ERROR)
     private Integer lineRunFlag;
+
+    @ApiModelProperty("搜索值")
+    private String searchValue;
 }

pqs-device/common-device-biz/src/main/java/com/njcn/device/biz/pojo/po/Overlimit.java

@@ -762,81 +762,6 @@ public class Overlimit implements Serializable {
     public Overlimit(){}
 
 
-    public Overlimit(String lineId, String scaTmp, float fDLRL, float fJZRL, float fXYRL, float fSBRL){
-        float[] fLimit = COverlimit.GetOverLimit(scaTmp, fDLRL, fJZRL, fXYRL, fSBRL);
-        this.id=lineId;
-        this.freqDev=fLimit[0];
-        this.voltageDev=fLimit[1];
-        this.ubalance=fLimit[2];
-        this.flicker=fLimit[3];
-        this.uaberrance=fLimit[4];
-        this.uharm2=fLimit[5];
-        this.uharm3=fLimit[6];
-        this.uharm4=fLimit[7];
-        this.uharm5=fLimit[8];
-        this.uharm6=fLimit[9];
-        this.uharm7=fLimit[10];
-        this.uharm8=fLimit[11];
-        this.uharm9=fLimit[12];
-        this.uharm10=fLimit[13];
-        this.uharm11=fLimit[14];
-        this.uharm12=fLimit[15];
-        this.uharm13=fLimit[16];
-        this.uharm14=fLimit[17];
-        this.uharm15=fLimit[18];
-        this.uharm16=fLimit[19];
-        this.uharm17=fLimit[20];
-        this.uharm18=fLimit[21];
-        this.uharm19=fLimit[22];
-        this.uharm20=fLimit[23];
-        this.uharm21=fLimit[24];
-        this.uharm22=fLimit[25];
-        this.uharm23=fLimit[26];
-        this.uharm24=fLimit[27];
-        this.uharm25=fLimit[28];
-        this.iharm2=fLimit[29];
-        this.iharm3=fLimit[30];
-        this.iharm4=fLimit[31];
-        this.iharm5=fLimit[32];
-        this.iharm6=fLimit[33];
-        this.iharm7=fLimit[34];
-        this.iharm8=fLimit[35];
-        this.iharm9=fLimit[36];
-        this.iharm10=fLimit[37];
-        this.iharm11=fLimit[38];
-        this.iharm12=fLimit[39];
-        this.iharm13=fLimit[40];
-        this.iharm14=fLimit[41];
-        this.iharm15=fLimit[42];
-        this.iharm16=fLimit[43];
-        this.iharm17=fLimit[44];
-        this.iharm18=fLimit[45];
-        this.iharm19=fLimit[46];
-        this.iharm20=fLimit[47];
-        this.iharm21=fLimit[48];
-        this.iharm22=fLimit[49];
-        this.iharm23=fLimit[50];
-        this.iharm24=fLimit[51];
-        this.iharm25=fLimit[52];
-        this.uvoltageDev=fLimit[53];
-        this.iNeg=fLimit[54];
-        this.inuharm1=fLimit[55];
-        this.inuharm2=fLimit[56];
-        this.inuharm3=fLimit[57];
-        this.inuharm4=fLimit[58];
-        this.inuharm5=fLimit[59];
-        this.inuharm6=fLimit[60];
-        this.inuharm7=fLimit[61];
-        this.inuharm8=fLimit[62];
-        this.inuharm9=fLimit[63];
-        this.inuharm10=fLimit[64];
-        this.inuharm11=fLimit[65];
-        this.inuharm12=fLimit[66];
-        this.inuharm13=fLimit[67];
-        this.inuharm14=fLimit[68];
-        this.inuharm15=fLimit[69];
-        this.inuharm16=fLimit[70];
-    }
 
     public void buildIHarm(Float[] iHarmTem){
         this.iharm2= iHarmTem[0];

pqs-device/common-device-biz/src/main/java/com/njcn/device/biz/pojo/po/PqSensitiveUser.java

@@ -0,0 +1,62 @@
+package com.njcn.device.biz.pojo.po;
+
+import com.baomidou.mybatisplus.annotation.TableId;
+import com.baomidou.mybatisplus.annotation.TableName;
+import com.njcn.db.bo.BaseEntity;
+import lombok.Getter;
+import lombok.Setter;
+
+import java.io.Serializable;
+
+import static com.baomidou.mybatisplus.annotation.IdType.ASSIGN_ID;
+
+/**
+ * @Author: cdf
+ * @CreateTime: 2026-02-10
+ * @Description:
+ */
+@Getter
+@Setter
+@TableName("pq_sensitive_user")
+public class PqSensitiveUser extends BaseEntity implements Serializable {
+
+    private static final long serialVersionUID = 1L;
+
+    /**
+     * id
+     */
+    @TableId(value = "id",type = ASSIGN_ID)
+    private String id;
+
+    /**
+     * 敏感用户名称
+     */
+    private String name;
+
+    /**
+     * 敏感负荷类型
+     */
+    private String loadType;
+
+    /**
+     * 用户协议容量
+     */
+    private Double userAgreementCapacity;
+
+    /**
+     * 装机容量
+     */
+    private Double installedCapacity;
+
+    /**
+     * 所属厂站名称
+     */
+    private String substationName;
+
+    /**
+     * 排序
+     */
+    private Integer sort;
+
+
+}

pqs-device/common-device-biz/src/main/java/com/njcn/device/biz/utils/COverlimitUtil.java

@@ -57,8 +57,8 @@ public class COverlimitUtil {
           //配网
             Float[] iHarmTem = new Float[49];
             for (int i = 0; i <= 48; i++) {
-
+                //目前只处理了配网II类测点，III类测点暂未处理，III类测点参考主网
-                iHarmTem[i] = -3.14159f;
+                iHarmTem[i] = getHarmTag(i+2,voltageLevel).floatValue();
             }
             overlimit.buildIHarm(iHarmTem);
             overlimit.setINeg(-3.14159f);

pqs-device/device-boot/src/main/resources/bootstrap-jb.yml

@@ -0,0 +1,67 @@
+#当前服务的基本信息
+microservice:
+  ename: @artifactId@
+  name: '@name@'
+  version: @version@
+  sentinel:
+    url: @sentinel.url@
+  gateway:
+    url: @gateway.url@
+server:
+  port: 10202
+  max-http-header-size: 1048576
+#feign接口开启服务熔断降级处理
+feign:
+  sentinel:
+    enabled: true
+
+spring:
+  application:
+    name: @artifactId@
+  #nacos注册中心以及配置中心的指定
+  cloud:
+    nacos:
+      discovery:
+        server-addr: @nacos.url@
+        namespace: @nacos.namespace@
+      config:
+        username: @nacos.username@
+        password: @nacos.password@
+        server-addr: @nacos.url@
+        namespace: @nacos.namespace@
+        file-extension: yaml
+        shared-configs:
+          - data-id: share-config.yaml
+            refresh: true
+          - data-Id: share-config-datasource-db.yaml
+            refresh: true
+  main:
+    allow-bean-definition-overriding: true
+  servlet:
+    multipart:
+      #上传文件总的最大值
+      max-request-size: 200MB
+      #上传文件的最大值
+      max-file-size: 200MB
+
+
+#项目日志的配置
+logging:
+  config: http://@nacos.url@/nacos/v1/cs/configs?tenant=@nacos.namespace@&group=DEFAULT_GROUP&dataId=logback.xml
+  level:
+    root: info
+
+
+#mybatis配置信息
+mybatis-plus:
+  #别名扫描
+  type-aliases-package: com.njcn.device.pq.pojo,com.njcn.device.pms.pojo,com.njcn.device.biz.pojo.dto
+
+#是否是冀北设备台账树
+isJb: false
+
+oracle:
+  isSync: false
+  syncLedgerLineUrl: http://localhost:8082/export/syncLedgerLine
+  syncLedgerUpdateLine: http://localhost:8082/export/syncLedgerUpdateLine
+  syncLedgerDeleteLine: http://localhost:8082/export/syncLedgerDeleteLine

pqs-device/device-boot/src/main/resources/bootstrap-sjzx.yml

@@ -0,0 +1,72 @@
+#当前服务的基本信息
+microservice:
+  ename: @artifactId@
+  name: '@name@'
+  version: @version@
+  sentinel:
+    url: @sentinel.url@
+  gateway:
+    url: @gateway.url@
+server:
+  port: 10202
+  max-http-header-size: 1048576
+#feign接口开启服务熔断降级处理
+feign:
+  sentinel:
+    enabled: true
+
+spring:
+  application:
+    name: @artifactId@
+  #nacos注册中心以及配置中心的指定
+  cloud:
+    nacos:
+      discovery:
+        ip: @service.server.url@
+        server-addr: @nacos.url@
+        username: @nacos.username@
+        password: @nacos.password@
+        namespace: @nacos.namespace@
+      config:
+        server-addr: @nacos.url@
+        username: @nacos.username@
+        password: @nacos.password@
+        namespace: @nacos.namespace@
+        file-extension: yaml
+        shared-configs:
+          - data-id: share-config.yaml
+            refresh: true
+          - data-id: share-config-datasource-db.yaml
+            refresh: true
+  main:
+    allow-bean-definition-overriding: true
+  servlet:
+    multipart:
+      #上传文件总的最大值
+      max-request-size: 200MB
+      #上传文件的最大值
+      max-file-size: 200MB
+
+
+#项目日志的配置
+logging:
+  #config: http://@nacos.url@/nacos/v1/cs/configs?tenant=@nacos.namespace@&group=DEFAULT_GROUP&dataId=logback.xml
+  level:
+    root: info
+
+
+#mybatis配置信息
+mybatis-plus:
+  #别名扫描
+  type-aliases-package: com.njcn.device.pq.pojo,com.njcn.device.pms.pojo,com.njcn.device.biz.pojo.dto
+
+#是否是冀北设备台账树
+isJb: false
+mqtt:
+  client-id: @artifactId@${random.value}
+
+oracle:
+  isSync: false
+  syncLedgerLineUrl: http://localhost:8082/export/syncLedgerLine
+  syncLedgerUpdateLine: http://localhost:8082/export/syncLedgerUpdateLine
+  syncLedgerDeleteLine: http://localhost:8082/export/syncLedgerDeleteLine

pqs-device/device-boot/src/main/resources/bootstrap.yml

@@ -1,68 +1,3 @@
-#当前服务的基本信息
-microservice:
-  ename: @artifactId@
-  name: '@name@'
-  version: @version@
-  sentinel:
-    url: @sentinel.url@
-  gateway:
-    url: @gateway.url@
-server:
-  port: 10202
-  max-http-header-size: 1048576
-#feign接口开启服务熔断降级处理
-feign:
-  sentinel:
-    enabled: true
-
 spring:
-  application:
+  profiles:
-    name: @artifactId@
+    active: @spring.profiles.active@
-  #nacos注册中心以及配置中心的指定
-  cloud:
-    nacos:
-      discovery:
-        ip: @service.server.url@
-        server-addr: @nacos.url@
-        namespace: @nacos.namespace@
-      config:
-        server-addr: @nacos.url@
-        namespace: @nacos.namespace@
-        file-extension: yaml
-        shared-configs:
-          - data-id: share-config.yaml
-            refresh: true
-          - data-Id: share-config-datasource-db.yaml
-            refresh: true
-  main:
-    allow-bean-definition-overriding: true
-  servlet:
-    multipart:
-      #上传文件总的最大值
-      max-request-size: 200MB
-      #上传文件的最大值
-      max-file-size: 200MB
-
-#项目日志的配置
-#项目日志的配置
-logging:
-  config: http://@nacos.url@/nacos/v1/cs/configs?tenant=@nacos.namespace@&group=DEFAULT_GROUP&dataId=logback.xml
-  level:
-    root: info
-
-
-#mybatis配置信息
-mybatis-plus:
-  #别名扫描
-  type-aliases-package: com.njcn.device.pq.pojo,com.njcn.device.pms.pojo,com.njcn.device.biz.pojo.dto
-
-#是否是冀北设备台账树
-isJb: false
-mqtt:
-  client-id: @artifactId@${random.value}
-
-oracle:
-  isSync: false
-  syncLedgerLineUrl: http://localhost:8082/export/syncLedgerLine
-  syncLedgerUpdateLine: http://localhost:8082/export/syncLedgerUpdateLine
-  syncLedgerDeleteLine: http://localhost:8082/export/syncLedgerDeleteLine

pqs-device/pms-device/pms-device-boot/src/main/java/com/njcn/device/pms/mapper/distribution/mapping/PwMonitorMapper.xml

@@ -7,10 +7,10 @@
         SELECT DISTINCT
         monitor.Org_Id AS orgId,
         monitor.Org_Name AS orgName,
-        monitor.`Powerr_Id` AS powerId,
+        monitor.Powerr_Id AS powerId,
-        monitor.`Powerr_Name` AS powerName,
+        monitor.Powerr_Name AS powerName,
         monitor.id AS monitorId,
-        monitor.`Name` AS monitorName,
+        monitor.Name AS monitorName,
         monitor.Line_Id,
         monitor.Line_Name,
         pdm.Monitor_Sort AS monitorSort,
@@ -29,8 +29,8 @@
         (
         SELECT
         pm.id,
-        pm.`Name`,
+        pm.Name,
-        pm.`Status`,
+        pm.Status,
         pm.Org_Id,
         pm.Org_Name,
         pm.Powerr_Id,
@@ -51,8 +51,8 @@
         ) AS monitor
         INNER JOIN pms_distribution_monitor AS pdm ON monitor.id = pdm.Monitor_Id
         WHERE
-        monitor.`Status` = 1
+        monitor.Status = 1
-        AND pdm.`Status` = 1
+        AND pdm.Status = 1
         AND monitor.Org_Id IN
         <foreach collection="deptIdList" item="orgId" open="(" close=")" separator=",">
             #{orgId}
@@ -85,7 +85,7 @@
             AND pdm.If_Power_User = #{pwPmsMonitorParam.ifPowerUser}
         </if>
         <if test="pwPmsMonitorParam.monitorName !=null and pwPmsMonitorParam.monitorName != ''">
-            AND monitor.`Name` LIKE CONCAT('%',#{pwPmsMonitorParam.monitorName},'%')
+            AND monitor.Name LIKE CONCAT('%',#{pwPmsMonitorParam.monitorName},'%')
         </if>
     </select>
 

pqs-device/pq-device/pom.xml

@@ -14,6 +14,7 @@
     <modules>
         <module>pq-device-api</module>
         <module>pq-device-boot</module>
+        <module>pq-device-com</module>
     </modules>
 
     <properties>

pqs-device/pq-device/pq-device-api/pom.xml

@@ -27,6 +27,12 @@
             <artifactId>pqs-influx</artifactId>
             <version>${project.version}</version>
         </dependency>
+        <dependency>
+            <groupId>com.njcn</groupId>
+            <artifactId>supervision-api</artifactId>
+            <version>1.0.0</version>
+            <scope>compile</scope>
+        </dependency>
 
     </dependencies>
 </project>

pqs-device/pq-device/pq-device-api/src/main/java/com/njcn/device/pq/api/GeneralDeviceInfoClient.java

@@ -9,7 +9,7 @@ import com.njcn.device.pq.pojo.param.DeviceInfoParam;
 import com.njcn.device.pq.pojo.param.OnlineRateParam;
 import com.njcn.device.pq.pojo.po.TopMsgPO;
 import com.njcn.device.pq.pojo.vo.DevDetail;
-import com.njcn.device.pq.pojo.vo.RStatOnlinerateVO;
+import com.njcn.device.pq.pojo.vo.RStatOnlineRateVO;
 import org.springframework.cloud.openfeign.FeignClient;
 import org.springframework.web.bind.annotation.GetMapping;
 import org.springframework.web.bind.annotation.PostMapping;
@@ -70,6 +70,16 @@ public interface GeneralDeviceInfoClient {
     HttpResult<List<GeneralDeviceDTO>> getPracticalRunDeviceInfoAsSubstation(@RequestBody DeviceInfoParam deviceInfoParam);
 
 
+    /**
+     * 获取变电站分类的所有终端综合信息
+     *
+     * @param deviceInfoParam 查询终端条件
+     * @return 获取变电站分类的所有终端综合信息
+     */
+    @PostMapping("/getPracticalAllDeviceInfoAsSubstation")
+    HttpResult<List<GeneralDeviceDTO>> getPracticalAllDeviceInfoAsSubstation(@RequestBody DeviceInfoParam deviceInfoParam);
+
+
     /**
      * 获取实际运行终端综合信息
      *
@@ -111,7 +121,7 @@ public interface GeneralDeviceInfoClient {
      * @return
      */
     @PostMapping("/getOnlineRateByDevIds")
-    HttpResult<List<RStatOnlinerateVO>> getOnlineRateByDevIds(@RequestBody OnlineRateParam param);
+    HttpResult<List<RStatOnlineRateVO>> getOnlineRateByDevIds(@RequestBody OnlineRateParam param);
 
     /**
      *根据单位获取投运监测点（双系统）

pqs-device/pq-device/pq-device-api/src/main/java/com/njcn/device/pq/api/LineIntegrityClient.java

@@ -3,7 +3,9 @@ package com.njcn.device.pq.api;
 import com.njcn.common.pojo.annotation.OperateInfo;
 import com.njcn.common.pojo.constant.ServerInfo;
 import com.njcn.common.pojo.enums.common.LogEnum;
+import com.njcn.common.pojo.enums.response.CommonResponseEnum;
 import com.njcn.common.pojo.response.HttpResult;
+import com.njcn.common.utils.HttpResultUtil;
 import com.njcn.device.pq.api.fallback.DeviceTreeClientFallbackFactory;
 import com.njcn.device.pq.api.fallback.LineIntegrityClientFallbackFactory;
 import com.njcn.device.pq.pojo.dto.LineDataQualityDTO;
@@ -11,6 +13,8 @@ import com.njcn.device.pq.pojo.param.LineBaseQueryParam;
 import com.njcn.device.pq.pojo.param.LineDataQualityParam;
 import com.njcn.device.pq.pojo.po.RStatIntegrityD;
 import com.njcn.device.pq.pojo.vo.AlarmStrategyVO;
+import com.njcn.device.pq.pojo.vo.OnlineMonitorVo;
+import io.swagger.annotations.ApiImplicitParam;
 import io.swagger.annotations.ApiOperation;
 import org.springframework.cloud.openfeign.FeignClient;
 import org.springframework.web.bind.annotation.PostMapping;
@@ -51,4 +55,7 @@ public interface LineIntegrityClient {
 
     @PostMapping("/lineDataQuality")
     HttpResult<List<LineDataQualityDTO>> getLineDataQuality(@RequestBody LineDataQualityParam lineDataQualityParam);
+
+    @PostMapping("/noData")
+    HttpResult<List<OnlineMonitorVo>> getNoData(@RequestBody LineBaseQueryParam param);
 }

pqs-device/pq-device/pq-device-api/src/main/java/com/njcn/device/pq/api/PqDataVerifyCountClient.java

@@ -0,0 +1,26 @@
+package com.njcn.device.pq.api;
+
+import com.njcn.common.pojo.constant.ServerInfo;
+import com.njcn.common.pojo.response.HttpResult;
+import com.njcn.device.pq.api.fallback.dataVerifyCountFallbackFactory;
+import com.njcn.device.pq.pojo.param.LineBaseQueryParam;
+import com.njcn.device.pq.pojo.vo.OnlineMonitorVo;
+import org.springframework.cloud.openfeign.FeignClient;
+import org.springframework.web.bind.annotation.PostMapping;
+import org.springframework.web.bind.annotation.RequestBody;
+
+import java.util.List;
+
+/**
+ * @author xy
+ */
+@FeignClient(value = ServerInfo.DEVICE, path = "/dataVerifyCount", fallbackFactory = dataVerifyCountFallbackFactory.class, contextId = "dataVerifyCount")
+public interface PqDataVerifyCountClient {
+
+    /**
+     * 获取有异常数据的监测点相关信息
+     */
+    @PostMapping("/getAnomalousData")
+    HttpResult<List<OnlineMonitorVo>> getAnomalousData(@RequestBody LineBaseQueryParam param);
+
+}

pqs-device/pq-device/pq-device-api/src/main/java/com/njcn/device/pq/api/UserLedgerFeignClient.java

@@ -0,0 +1,45 @@
+package com.njcn.device.pq.api;
+
+import com.njcn.common.pojo.constant.ServerInfo;
+import com.njcn.common.pojo.response.HttpResult;
+import com.njcn.device.pq.api.fallback.UserLedgerFeignClientFallbackFactory;
+import com.njcn.supervision.pojo.param.SensitiveUserParam;
+import com.njcn.supervision.pojo.param.user.UserReportParam;
+import com.njcn.supervision.pojo.po.user.UserReportPO;
+import com.njcn.supervision.pojo.vo.user.NewUserReportVO;
+import com.njcn.supervision.pojo.vo.user.UserLedgerVO;
+import io.swagger.annotations.ApiOperation;
+import org.springframework.cloud.openfeign.FeignClient;
+import org.springframework.validation.annotation.Validated;
+import org.springframework.web.bind.annotation.GetMapping;
+import org.springframework.web.bind.annotation.PostMapping;
+import org.springframework.web.bind.annotation.RequestBody;
+import org.springframework.web.bind.annotation.RequestParam;
+
+import java.util.List;
+
+
+/**
+ * 流程实例 Api 接口
+ *
+ */
+@FeignClient(value = ServerInfo.DEVICE, path = "/userReport", fallbackFactory = UserLedgerFeignClientFallbackFactory.class)
+public interface UserLedgerFeignClient {
+
+
+    @PostMapping("/selectUserList")
+    HttpResult<List<UserLedgerVO>> selectUserList(@RequestBody UserReportParam userReportParam);
+
+    @GetMapping("/selectUserInfo")
+    HttpResult<UserLedgerVO> selectUserInfo(@RequestParam("id") String id);
+
+    @PostMapping(value = "/bindUserStation")
+    HttpResult<List<UserLedgerVO>> bindUserStation(@RequestParam("userId")String userId,@RequestParam("stationId")String stationId);
+
+    @PostMapping("/getUserReportByIds")
+    HttpResult<List<NewUserReportVO>> getUserReportByIds(@RequestBody List<String> ids);
+
+    @PostMapping("/getSensitiveUserByDept")
+    @ApiOperation("根据部门获取敏感用户信息")
+    HttpResult<List<UserReportPO>> getSensitiveUserByDept(@RequestBody @Validated SensitiveUserParam param) ;
+}

pqs-device/pq-device/pq-device-api/src/main/java/com/njcn/device/pq/api/fallback/AlarmClientFallbackFactory.java

@@ -3,9 +3,9 @@ package com.njcn.device.pq.api.fallback;
 import com.njcn.common.pojo.enums.response.CommonResponseEnum;
 import com.njcn.common.pojo.exception.BusinessException;
 import com.njcn.common.pojo.response.HttpResult;
+import com.njcn.device.biz.utils.DeviceEnumUtil;
 import com.njcn.device.pq.api.AlarmClient;
 import com.njcn.device.pq.pojo.vo.AlarmStrategyVO;
-import com.njcn.device.biz.utils.DeviceEnumUtil;
 import feign.hystrix.FallbackFactory;
 import lombok.extern.slf4j.Slf4j;
 import org.springframework.stereotype.Component;
@@ -14,11 +14,12 @@ import java.util.List;
 
 /**
  * 告警管理熔断降级
+ *
  * @author yzh
  * @date 2022/9/19
  */
 @Slf4j
-@Component
+@Component("deviceAlarmClientFallbackFactory")
 public class AlarmClientFallbackFactory implements FallbackFactory<AlarmClient> {
     @Override
     public AlarmClient create(Throwable throwable) {

pqs-device/pq-device/pq-device-api/src/main/java/com/njcn/device/pq/api/fallback/GeneralDeviceInfoClientFallbackFactory.java

@@ -10,7 +10,7 @@ import com.njcn.device.pq.pojo.param.DeviceInfoParam;
 import com.njcn.device.pq.pojo.param.OnlineRateParam;
 import com.njcn.device.pq.pojo.po.TopMsgPO;
 import com.njcn.device.pq.pojo.vo.DevDetail;
-import com.njcn.device.pq.pojo.vo.RStatOnlinerateVO;
+import com.njcn.device.pq.pojo.vo.RStatOnlineRateVO;
 import com.njcn.device.biz.utils.DeviceEnumUtil;
 import feign.hystrix.FallbackFactory;
 import lombok.extern.slf4j.Slf4j;
@@ -59,6 +59,12 @@ public class GeneralDeviceInfoClientFallbackFactory implements FallbackFactory<G
                 throw new BusinessException(finalExceptionEnum);
             }
 
+            @Override
+            public HttpResult<List<GeneralDeviceDTO>> getPracticalAllDeviceInfoAsSubstation(DeviceInfoParam deviceInfoParam) {
+                log.error("{}异常，降级处理，异常为：{}", "获取变电站分类的所有终端综合信息", throwable.toString());
+                throw new BusinessException(finalExceptionEnum);
+            }
+
             @Override
             public HttpResult<List<GeneralDeviceDTO>> getPracticalRunDeviceInfo(DeviceInfoParam deviceInfoParam) {
                 log.error("{}异常，降级处理，异常为：{}", "获取实际运行终端综合信息", throwable.toString());
@@ -84,7 +90,7 @@ public class GeneralDeviceInfoClientFallbackFactory implements FallbackFactory<G
             }
 
             @Override
-            public HttpResult<List<RStatOnlinerateVO>> getOnlineRateByDevIds(OnlineRateParam param) {
+            public HttpResult<List<RStatOnlineRateVO>> getOnlineRateByDevIds(OnlineRateParam param) {
                 log.error("{}异常，降级处理，异常为：{}", "获取终端在线率（谐波专用）", throwable.toString());
                 throw new BusinessException(finalExceptionEnum);
             }

pqs-device/pq-device/pq-device-api/src/main/java/com/njcn/device/pq/api/fallback/LineIntegrityClientFallbackFactory.java

@@ -11,6 +11,7 @@ import com.njcn.device.pq.pojo.param.LineBaseQueryParam;
 import com.njcn.device.pq.pojo.param.LineDataQualityParam;
 import com.njcn.device.pq.pojo.po.RStatIntegrityD;
 import com.njcn.device.pq.pojo.vo.AlarmStrategyVO;
+import com.njcn.device.pq.pojo.vo.OnlineMonitorVo;
 import feign.hystrix.FallbackFactory;
 import lombok.extern.slf4j.Slf4j;
 import org.springframework.stereotype.Component;
@@ -54,6 +55,12 @@ public class LineIntegrityClientFallbackFactory implements FallbackFactory<LineI
                 throw new BusinessException(finalExceptionEnum);
             }
 
+            @Override
+            public HttpResult<List<OnlineMonitorVo>> getNoData(LineBaseQueryParam param) {
+                log.error("{}异常，降级处理，异常为：{}", "获取监测点数据完成性为0的数据", throwable.toString());
+                throw new BusinessException(finalExceptionEnum);
+            }
+
         };
     }
 }

pqs-device/pq-device/pq-device-api/src/main/java/com/njcn/device/pq/api/fallback/UserLedgerFeignClientFallbackFactory.java

@@ -1,10 +1,12 @@
-package com.njcn.supervision.api.fallback;
+package com.njcn.device.pq.api.fallback;
 
 import com.njcn.common.pojo.enums.response.CommonResponseEnum;
 import com.njcn.common.pojo.exception.BusinessException;
 import com.njcn.common.pojo.response.HttpResult;
-import com.njcn.supervision.api.UserLedgerFeignClient;
+import com.njcn.device.pq.api.UserLedgerFeignClient;
+import com.njcn.supervision.pojo.param.SensitiveUserParam;
 import com.njcn.supervision.pojo.param.user.UserReportParam;
+import com.njcn.supervision.pojo.po.user.UserReportPO;
 import com.njcn.supervision.pojo.vo.user.NewUserReportVO;
 import com.njcn.supervision.pojo.vo.user.UserLedgerVO;
 import com.njcn.supervision.utils.SupervisionEnumUtil;
@@ -52,6 +54,12 @@ public class UserLedgerFeignClientFallbackFactory implements FallbackFactory<Use
                 log.error("{}异常，降级处理，异常为：{}", "根据ids获取非电网侧用户信息", throwable.toString());
                 throw new BusinessException(finalExceptionEnum);
             }
+
+            @Override
+            public HttpResult<List<UserReportPO>> getSensitiveUserByDept(SensitiveUserParam param) {
+                log.error("{}异常，降级处理，异常为：{}", "根据部门获取敏感用户信息异常", throwable.toString());
+                throw new BusinessException(finalExceptionEnum);
+            }
         };
     }
 }

pqs-device/pq-device/pq-device-api/src/main/java/com/njcn/device/pq/api/fallback/dataVerifyCountFallbackFactory.java

@@ -0,0 +1,42 @@
+package com.njcn.device.pq.api.fallback;
+
+import com.njcn.common.pojo.enums.response.CommonResponseEnum;
+import com.njcn.common.pojo.exception.BusinessException;
+import com.njcn.common.pojo.response.HttpResult;
+import com.njcn.device.biz.utils.DeviceEnumUtil;
+import com.njcn.device.pq.api.PqDataVerifyCountClient;
+import com.njcn.device.pq.api.PqDevTypeClient;
+import com.njcn.device.pq.pojo.param.LineBaseQueryParam;
+import com.njcn.device.pq.pojo.po.PqDevType;
+import com.njcn.device.pq.pojo.vo.OnlineMonitorVo;
+import feign.hystrix.FallbackFactory;
+import lombok.extern.slf4j.Slf4j;
+import org.springframework.stereotype.Component;
+
+import java.util.List;
+
+@Slf4j
+@Component
+public class dataVerifyCountFallbackFactory implements FallbackFactory<PqDataVerifyCountClient> {
+    @Override
+    public PqDataVerifyCountClient create(Throwable throwable) {
+        //判断抛出异常是否为解码器抛出的业务异常
+        Enum<?> exceptionEnum = CommonResponseEnum.SERVICE_FALLBACK;
+        if (throwable.getCause() instanceof BusinessException) {
+            BusinessException businessException = (BusinessException) throwable.getCause();
+            exceptionEnum = DeviceEnumUtil.getExceptionEnum(businessException.getResult());
+        }
+        Enum<?> finalExceptionEnum = exceptionEnum;
+        return new PqDataVerifyCountClient()
+        {
+
+            @Override
+            public HttpResult<List<OnlineMonitorVo>> getAnomalousData(LineBaseQueryParam param) {
+                log.error("{}异常，降级处理，异常为：{}", "获取有异常数据的监测点相关信息异常", throwable.toString());
+                throw new BusinessException(finalExceptionEnum);
+            }
+        };
+
+
+    }
+}

pqs-device/pq-device/pq-device-api/src/main/java/com/njcn/device/pq/constant/Param.java

@@ -55,7 +55,11 @@ public interface Param {
     //长时间闪变值
     String pst = "DataFlicker-pst";
 
+    //电压暂降
+    String Voltage_Dip = "r_mp_event_detail-Voltage_Dip";
+    //电压暂升
     String Voltage_Rise = "r_mp_event_detail-Voltage_Rise";
+
     String pf = "DataHarmPowerP-pf";